BCM RX945GC Manual de usuario

Micro-ATX

RX945GC

Intel® 65nm

Core™ 2 Duo (E4xxx Series) /

Pentium® Dual Core (E2xxx Series) /

Pentium® 4 (6x1 Series) /

Pentium® D (9xx Series)

w/ 533/800MHz FSB

User’s Manual

First Edition – May 2008

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE

THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS

"A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL

INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS

EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT

INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE

HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL

INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE

INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

BCM Advanced Research reserves the right to make changes, without notice, to any

product, including circuits and/or software described or contained in this manual in order

to improve design and/or performance. BCM Advanced Research assumes no

responsibility or liability for the use of the described product(s), conveys no license or title

under any patent, copyright, or masks work rights to these products, and makes no

representations or warranties that these products are free from patent, copyright, or mask

work right infringement, unless otherwise specified. Applications that are described in this

manual are for illustration purposes only. BCM Advanced Research makes no

representation or warranty that such application will be suitable for the specified use

without further testing or modification.

Life Support Policy

BCM Advanced Research PRODUCTS ARE NOT FOR USE AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR

WRITTEN APPROVAL OF BCM Advanced Research.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling,

can be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose

failure to perform can be reasonably expected to cause the failure of the life support

device or system, or to affect its safety or effectiveness.

A Message to the Customer

BCM Customer Services

Each and every BCM product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new BCM device is destined for the laboratory or the factory

floor, you can be assured that your product will provide the reliability and ease of

operation for which the name BCM has come to be known.

Your satisfaction is our primary concern. Here is a guide to BCM customer services. To

ensure you get the full benefit of our services, please follow the instructions below

carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you

can easily find answers in your product documentation. These answers are normally a lot

more detailed than the ones we can give over the phone. So please consult the user’s

manual first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.bcmcom.com.

If you still cannot find the answer, gather all the information or questions that apply to

your problem, and with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most from your BCM

products. In fact, most problems reported are minor and are able to be easily solved over

the phone.

In addition, free technical support is available from BCM engineers every business day.

We are always ready to give advice on application requirements or specific information

on the installation and operation of any of our products. Please do not hesitate to call or

e-mail us.

BCM Advanced Research

7 Marconi,

Irvine, California, 92618

USA

Tel : +1-949-470-1888

Fax : +1-949-470-0971

http://www.bcmcom.com

E-mail: [email protected]

Product Warranty

BCM warrants to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by BCM, or which have been subject to

misuse, abuse, accident or improper installation. BCM assumes no liability under the

terms of this warranty as a consequence of such events. Because of BCM high

quality-control standards and rigorous testing, most of our customers never need to use

our repair service. If any of BCM products is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will be billed

according to the cost of replacement materials, service time, and freight. Please consult

your dealer for more details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU type

and speed, BCM products model name, hardware & BIOS revision number, other

hardware and software used, etc.) Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and

any helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material

authorization) number from your dealer. This allows us to process your good return

more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card

and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.

Manual Objectives

This manual describes in detail the BCM RX945GC Main board.

We strongly recommend that you study this manual carefully before attempting to

interface with RX945GC or change the standard configurations. Whilst all the necessary

information is available in this manual we would recommend that unless you are

confident, you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see the

description of the Jumper Settings for details).

If you have any suggestions or find any errors concerning this manual and want to inform

us of these, please contact our Customer Service department with the relevant details.

Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not make

connections while the power is on. Sensitive electronic

components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC

chassis.

Caution!

Always ground yourself to remove any static charge before

touching the mainboard. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

Document Amendment History

Revision Date By Comment

1st May, 2008 W.H. Initial Release

Contents

Chapter 1: System Setup ..............................................................................................12

1.1 Welcome! ......................................................................................................................................12

1.2 Packing Contents..........................................................................................................................12

1.3 Special Features ...........................................................................................................................13

1.3.1 Product Highlights.........................................................................................................................13

1.4 Before you proceed.......................................................................................................................14

1.5 Mainboard Overview .....................................................................................................................15

1.5.1 Placement direction ......................................................................................................................15

1.5.2 Screw Holes ..................................................................................................................................15

1.5.3 Mainboard Layout .........................................................................................................................16

1.6 Central Processing Unit (CPU) .....................................................................................................17

1.6.1 Installing the CPU .........................................................................................................................18

1.6.2 Installing the CPU Heatsink and fan .............................................................................................20

1.6.3 Uninstalling the CPU Heatsink and fan.........................................................................................22

1.7 System Memroy ............................................................................................................................24

1.7.1 Overview.....................................................................................................................................24

1.7.2 Dual-Channel Mode Population Rule .....................................................................................24

1.7.3 Installing DIMM .............................................................................................................................25

1.7.4 Removing a DIMM...................................................................................................27

1.8 Power Supply................................................................................................................................28

1.8.1 ATX 24-pin Power Connector: JPWR3.........................................................................................28

1.8.2 ATX 12V Power Connector: JPW1 ...............................................................................................28

1.9 Back Panel....................................................................................................................................30

1.10 Connectors/Headers .....................................................................................................................32

1.10.1 IDE Connector: ATA-HDD ............................................................................................................32

1.10.2 Serial ATA Connectors: SATA-1, SATA-2, SATA-3, SATA-4.......................................................32

1.10.3 Fan Power Connector: CPU-FAN, SFAN-1, SFAN-2 ...................................................................33

1.10.4 Chassis Intrusion Switch Connector: J20 .....................................................................................33

1.10.5 CD-In Connector: CD-IN (J10)......................................................................................................33

1.10.6 Front Panel Audio Connector: FRONT-AUDIO (J6)............................................................34

1.10.7 Front USB Connectors: FRONT USB-1, FRONT USB-2 .............................................................34

1.10.8 Serial Port Connector: COM-1......................................................................................................35

1.10.9 Front Panel Connector: FRONT PANEL (J34) .............................................................................36

1.11 Jumpers .......................................................................................................................................37

1.11.1 Clear CMOS Jumpers: JP1...........................................................................................................37

1.11.2 The Header: J35 ...........................................................................................................................37

1.12 The Expansion Slots .....................................................................................................................38

1.12.1 Installation of expansion card .......................................................................................................38

1.12.2 Setup an expansion card ..............................................................................................................38

1.12.3 PCI (Peripheral Component Interconnect) Express Slot ..............................................................38

1.12.3.1 PCI-E x16 Slot: PCIE_16 .........................................................................................................39

1.12.3.2 PCI-E x1 Slot: J18.........................................................................................................................39

1.12.4 PCI Slots: PCI-1, PCI-2.................................................................................................................39

Chapter 2: Starting Up the System .............................................................................40

2.1 Starting Up Your System...........................................................................................................40

Chapter 3: BIOS Setup ..................................................................................................42

3.1 Introducing BIOS...........................................................................................................................42

3.2 Entering BIOS Setup Menu...........................................................................................................42

3.3 Getting Help ..................................................................................................................................43

3.4 The Main Menu .............................................................................................................................44

3.5 Standard CMOS Features ............................................................................................................45

3.6 Advanced BIOS Features .............................................................................................................48

3.6.1 CPU Feature .................................................................................................................................50

3.6.2 Hard Disk Boot Priority..................................................................................................................51

3.7 Advanced Chipset Features ....................................................................................................52

3.8 Integrated Peripherals................................................................................................................54

3.8.1 OnChip IDE Device.......................................................................................................................54

3.8.2 Onboard Device ............................................................................................................................57

3.8.3 SuperIO Device..........................................................................................................................59

3.9 Power Management Setup ...........................................................................................................61

3.10 PnP/PCI Configurations ................................................................................................................65

3.10.1 PCI Express Configuration............................................................................................................67

3.11 PC Health Status ..........................................................................................................................68

3.12 Frequency/Voltage Control ...........................................................................................................69

3.13 Load Manufacturer Settings..........................................................................................................70

3.14 Set Supervisor Password/ User Password ...................................................................................71

3.15 Exit ................................................................................................................................................72

Mainboard Specifications

Model RX945GC

Processor Intel® 65nm Socket 775

Core 2 Duo (E4xxx Series)/ Pentium® Dual Core (E2xxx Series)/

Pentium® 4 (6x1 Series)/ Pentium® D (9xx Series)

Supports CPU FSB 800/533MHz

North Bridge Intel®945GC

Memory DDR2 400/533/667 SDRAM

* Supports DDR2 400 (PC2-3200), DDR2 533 (PC2-4200), DDR2 667 (PC2-5300)

memory modules up to 4GB max. (2GB max/ DIMM slot)

* 2 DDR2 DIMM slots (240-pin/ 1.8V), supports Non-ECC, un-buffered memory

Integrated Graphics Intel® 945GC integrated GMA950 graphic engine, 32bpp true color, 400MHz

graphic core, provides 400MHz 24-bit RAMDAC, 2D, 3D graphics, SW DVD @ 30fps

(full screen)

South Bridge Intel® ICH7

SATA 4 x SATA II connectors supports 3.0 Gbs transfer speed

PCI-E 1 x PCI-E x 16 slot and 1 x PCI-E x 1 slot

PCI 2 x PCI Slots (PCI 2.2 compliant)

USB 8 x USB 2.0 ports (4 x Rear I/O, 4 x header)

1 x IDE channel supports up to 2 IDE devicesIDE

Supports Ultra DMA 33/66/100, PIO up to mode 4

Super I/O Controller ITE® 8712F

Serial Ports 2 x RS232 port (1 x Rear I/O, 1 x header)

Watch Dog Timer 1 ~ 255 sec timer

HW Monitor Yes

Realtek® ALC883Audio

HD Audio Codec with auto jack sensing

Intel® 82573LLAN

1 x 10/100/1000 LAN

Award® BIOSBIOS

Award Bios with 4MB Firmware Hub

Expansion Slots

PCI-E 1 x PCI-E x 16 Slot supports PCI-E x16 Graphic card or ADD2-DVI card

1 x PCI-E x 1 Slot

PCI 2 x PCI slot

Otros manuales para RX945GC

Tabla de contenidos

Otros manuales de Hardware de computadora de BCM

BCM

BCM EBC-5612 Series Manual de usuario

BCM

BCM SMA-X8I Manual de usuario

BCM

BCM NUC-TGU Manual de usuario

BCM

BCM EMS-TGL Manual de usuario

BCM

BCM Mini-ITX MX852GM-C6 Series Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario