COVIDAIR S/T Easy Quick Start Guide Page
1 Descri tion
The following images describe the components of the COVIDAIR S/T device
1 Handle
2 Patient Inspiratory port
3 On / off button
4 Touchscreen
5 Humidification system (Option not deliverable)
6 Humidification output port
7 Humidification input port
8 SpO2 sensor connector
9 USB connectors (maintenance service only)
10 Ground connector
11 Power connector
12 Low flow oxygen inlet and inlet filter
13 Nameplate
1. Easy using Covidair S/T
Switching the device ON
The COVIDAIR device starts up as soon as the external power supply is connected The push button
flashes slowly (1 Hz) to signify that the device has started
If the device has been switched off displaying the graphical interface and the mains supply has
not been disconnected, press the push button to start it again
The device is ready to use when the touch screen displays the main screen The turbine blows at
idle (0 5l/s) to indicate that it is working properly
NOTE:
The display needs about 30 seconds to turn itself on
2.2. Switching the device OFF
To switch off the COVIDAIR device, press the button on the main screen A message will ask for
confirmation of the action The push button flashes quickly (5 Hz) to indicate that the device has
switched off
