BBQ GO BG-HH2P Manual de usuario
Digital Food Thermometer
With Dual External Probes
BG-HH2P
Menu Description
Temperature Unit Setting
Button Sound Setting
Backlight ON Time Setting
Alarm Setting of the Foldable Probe
Target Temperature Setting of the Foldable Probe
Temperature Calibration Setting of the Foldable Probe
Alarm Setting of the External Probe1
Target Temperature Setting of the External Probe1
Temperature Calibration Setting of the External Probe1
Alarm Setting of the External Probe2
Target Temperature Setting of the External Probe2
Temperature Calibration Setting of the External Probe2
Operations of the Foldable Probe
(without external probe)
Operations of the BBQ Mode
(with external probes inserted)
Meat Temperature & Doneness Chart
02
04-13
14-19
03
03
20
21
22
Contents
2 How to Replace Batteries
01
1 Product Layout
9 Appendix
8 Cautions
7. Trouble Shooting
6. Operation Instructions
3. Feature
4 Buttons
5. Menu Instructions
Product Layout
- 01 -
X2
Set temperature
Alarm Icon
Foldable probe
Battery Cover
Dual Extemal Probes
Built-in Magnet
External
Probe Icon
Hold Icon
Hold & Decrease Button
Power & Increase Button
Set Button
Current Temperature
- 02 -
1. Unscrew the cover of the battery cartridge with
the supplied screwdriver.
2. Put 2 AAA batteries into the battery compart-
ment and make sure that the positive and negative
poles are in the correct position.
3. Install the cover back and tighten the screws.
How to Change
Replacement Batteries
Feature
Buttons
Product Name: Digital Food Thermometer with Dual
External Probes
Product Model: BG-HH2P
Three Channel Temperature Measurement Function
Measurement Range: -50.0℃~300℃/-58.0℉~572℉
Measurement Accuracy: ±0.5℃/±1.0℉
Response Time of the Foldable Probe: 2S
Temperature Unit: ℃/℉
Waterproof Level: IPX5
Independent Temperature Calibration for Each
Channel
Lock Function
Alarm Function
Backlight & LCD Display
Auto On/Off
Power: Adopt 2 AAA batteries, easy to change
Magnetic back and hanging design, ideal for storage
Warranty: 2 Years
: Hold the button for 2 seconds to enter into menu
setup mode, then press the button once again to select
a function in the menu. Hold the button for 2 seconds
to save the settings and exit setup.
: In normal state, Hold the button for 2 seconds to
turn off the thermometer; In shut-downstate, press the
button to turn on the thermometer; In menu setup
mode, press the button to adjust parameters and hold
the button to adjust the parameter quickly.
: In normal mode, press the button to lock or unlock
the current temperature reading on the screen.Hold the
button for 3 seconds to switch the display of different
probes. In menu setup mode, press the button to adjust
the parameters; hold the button to adjust the parame-
ters quickly.
- 03 -
Menu Instructions
- 04 -
Menu Description
CF
BEE
B LT
ALM
TS
CA
ALM1
Menu
Icons Dis-
play Function Setting
Range Factory
Setting
Temperature Unit
Alarm Sound
Lighting Time
℃ or ℉ ℉
ON
10
ON or OFF
5~60 Seconds
ON or OFF
ON or OFF
-50.0℃~300℃
-58.0℉~572℉
Alarm of the
Foldable Probe
Alarm Value of the
Foldable Probe
Calibration Value of
the Foldable Probe
Alarm of the
External Probe1
-4.9℃~4.9℃
-9.9℉~9.9℉
77.0℃
OFF
170℉
0.0℃
0.0℉
ON
- 05 -
Alarm Value of the
External Probe2
Calibration Value of
the External Probe2
Calibration Value of
the External Probe1
Alarm of the
External Probe2 ON or OFF ON
Alarm Value of the
External Probe1
TS1
CA1
ALM2
TS2
CA2
-50.0℃~300℃
-58.0℉~572℉
-4.9℃~4.9℃
-9.9℉~9.9℉
77.0℃
170℉
0.0℃
0.0℉
-50.0℃~300℃
-58.0℉~572℉
-4.9℃~4.9℃
-9.9℉~9.9℉
77.0℃
170℉
0.0℃
0.0℉
The thermometer will save the settings and exit setup
30 seconds later if no operation is performed on the
device, or you can hold for 2 seconds to exit setup
manually.
Temperature Unit Setting
Hold for 2 seconds to enter into setup state, then
press the button to select BLT.
Press or to choose a temperature unit between
℃ and ℉.
Note: All parameters will be restored to the default
data if the temperature unit is Changed.
Hold for 2 seconds to enter into setup state, then
press the button to select BEE.
- 06 -
Button Sound Setting
Hold for 2 seconds to enter into setup state, the
parameter of bLt will flash on the screen.
Press or to adjust the setting value, hold or
to adjust the setting value quickly.
The thermometer will save the settings and exit setup
30 seconds later if no operation is performed on the
device, or you can hold for 2 seconds to exit setup
manually.
Press or to select between ON and OFF.
The thermometer will save the settings and exit setup
30 seconds later if no operation is performed on the
device, or you can hold for 2 seconds to exit setup
manually.
- 07 -
BackLight ON Time Setting
Tabla de contenidos
Otros manuales de Termómetro de BBQ GO
