Baxi Fires Division VALOR FIRES FireSlide 940 Instrucciones de uso

5122722/01

Model940

Inset live fuel effect gas fire

Incorporating the VALOR FIRES CONTROL

Fitted with one of the following fascia.

Adorn, Decadent, Dream,

Eternal, Icon, Obsession or

Visage

(GC No. 32-032-71)

We trust that this guide gives

sufficient details to enable this

appliance to be installed, operated

and maintained satisfactorily.

However, if further information is

required, our

Valor Fires Technical Helpline will

be pleased to help.

Telephone 08706 061 065 (National

call rates apply in the United

Kingdom).

In the Republic of Ireland

Telephone 0044 8706 061 065.

INSTALLER: Please leave this guide with the owner

INSTALLER AND OWNER GUIDE

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following

address: The Company Secretary, Baxi Heating UK Limited, The Wyvern Business

Park, Stanier Way, Derby, DE21 6BF.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

Valor Fires, Erdington, Birmingham B24 9QP

www.firesandstoves.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from

those given in this publication

Page 2

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20).

WHEN CONVERTED USING CONVERSION KIT NO. 0595211

THIS APPLIANCE

IS FOR USE WITH PROPANE GAS (G31).

THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE UNITED

KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE).

INSTALLER GUIDE

Page 3

Safety First.

Valor Fires fires are CE Approved and designed to meet the appropriate British

Standards and Safety Marks.

Quality and Excellence.

All Valor Fires fires are manufactured to the highest standards of quality and

excellence and are manufactured under a BS EN ISO 9001 quality system accepted

by the British Standards Institute.

The Highest Standards

Valor Fires is a member of SBGI which works to ensure high standards of safety,

quality and performance.

Careful Installation

Valor Fires is a CORGI registered company. All our gas fires must be

installed by a competent CORGI Registered Installer in accordance

with our Installer Guide and should not be fitted directly on to a

carpet or floor of combustible material.

INSTALLER GUIDE

Page 4

INSTALLER GUIDE

INSTALLERGUIDE

FOR OWNER GUIDE SEE PAGES 50 TO 67

CONTENTS

Section Page

INSTALLER GUIDE 4 - 49

OWNER GUIDE

50 - 67

1. SAFETY 6

2. APPLIANCE DATA 7

3. GENERAL INSTALLATION REQUIREMENTS 8

4. PACK CONTENTS 17

5. FIREPLACE CHECK 21

6. IGNITION CHECK 22

7. GAS SUPPLY CONNECTION 23

8. PREPARING APPLIANCE FOR INSTALLATION 23

9. CONVECTION BOX INSTALLATION 27

10. BURNER AND SUPPLY PIPE INSTALLATION 30

11. CERAMIC WALLS INSTALLATION 31

12. FASCIA AND CONTROL LINKAGE 32

13. FITTING THE CERAMIC FUEL EFFECT 36

14. FRONT / CASTINGS INSTALLATION 36

15. FULL OPERATING CHECKS 37

15.1 Checking the control settings. 37

15.2 Check for spillage. 38

15.3 Flame supervision and spillage monitoring system. 39

16. FINAL REVIEW 39

17. SERVICING & PARTS REPLACEMENT 40

17.1 Checking the aeration setting of the burner. 41

17.2 To remove the ignition microswitch. 42

17.3 To remove the gas shut-off microswitch. 42

17.4 To remove the fascia. 43

17.5 To replace the control slide unit. 44

17.6 To replace the control slide button. 45

17.7 To remove the complete burner unit. 45

17.8 To remove the electronic ignition generator. 46

17.9 To remove the thermocouple interrupter block. 46

17.10 To remove the pilot unit. 47

17.11 To remove the shut-off tap. 47

17.12 To remove the gas flow rate controller. 48

17.13 To replace the burner. 48

17.14 To remove the main burner injector. 49

17.15 To remove the appliance from the fireplace. 49

Page 5

INSTALLER GUIDE

1. SAFETY

Installer

Before continuing any further with the installation of this appliance please read the

following guide to manual handling

!The lifting weight of this appliance is as below: -

Model Heat Engine (kg) Firefront (kg)

Combined Weight (kg)

Adorn 11.5 16.6 28.1

Visage 11.5 5.5 17.0

Icon 11.5 3.5 15.0

Dream 11.5 13.35 24.85

Eternal 11.5 3.45 14.95

Decadent 11.5 4.0 15.5

Obsession 11.5 3.25 14.75

One person should be sufficient to lift the fire. If for any reason this weight is

considered too heavy then obtain assistance.

!When lifting always keep your back straight. Bend your legs and not your back.

!Avoid twisting at the waist. It is better to reposition your feet.

!Avoid upper body/top heavy bending. Do not lean forward or sideways whilst

handling the fire.

Always grip with the palm of the hand. Do not use the tips of fingers for support.

!Always keep the fire as close to the body as possible. This will minimise the

cantilever action.

!Use gloves to provide additional grip.

!Always use assistance if required.

Page 6

INSTALLER GUIDE

2. APPLIANCE DATA

*When converted using kit 0595211.

The appliance information label is located on a plate at the base of the fire. This can

be seen by lowering the bottom front cover of the fascia.

This product uses fuel effect pieces and burner compartment walls containing

Refractory Ceramic Fibres (RCF), which are man-made vitreous silicate fibres.

Excessive exposure to these materials may cause irritation to eyes, skin and

respiratory tract. Consequently, it is important to take care when handling these

articles to ensure that the release of dust is kept to a minimum. To ensure that the

release of fibres from these RCF articles is kept to a minimum, during installation

and servicing we recommend that you use a HEPA filtered vacuum to remove any

dust and soot accumulated in and around the fire before and after working on the

fire. When replacing these articles we recommend that the replaced items are not

broken up, but are sealed within a heavy duty polythene bag, clearly labelled as

RCF waste. RCF waste is classed as a stable, non-reactive hazardous waste and

may be disposed at a landfill licenced to accept such waste.

Protective clothing is

not required when handling these articles, but we recommend the use of suitable

gloves to prevent irritation. We also recommend you follow the normal hygiene

rules of not smoking, eating or drinking in the work area and always wash your

hands before eating or drinking.

This appliance does not contain any component manufactured from asbestos or

asbestos related products.

Page 7

Gas Natural (G20) Propane (G31) *

Inlet Pressure 20mbar 37mbar

Input - Max. (Gross) 6.85kW (23,400 Btu/h) 6.7kW (22,860 Btu/h)

Input - Min. (Gross) 2.7kW (9,410 Btu/h) 4.3kW (14,670 Btu/h)

Inlet Test Pressure (Cold) 20.0 ± 1.0mbar (8.0 ± 0.4in

w.g.)

37.0 ± 1.0 mbar (14.85 ±

0.4in w.g.)

Gas Connection 8mm pipe 8mm pipe

Burner Injector Stereomatic Cat 82 - 074 Stereomatic Size 132

Pilot & Atmosphere Sensing

Device Copreci Ref. O.D.S

21500/166

Copreci Ref. O.D.S

21500/166 Fitted with RBM

180 -02 injector

Ignition Electronic

(Battery 9V PP3) Electronic

(Battery 9V PP3)

Aeration See section 17.1 Non-adjustable

INSTALLER GUIDE

The efficiency of this appliance has been measured as specified in BS 7977 - 1 and

the result is as below :

Model

Efficiency % (Gross)

940 58

940 when converted to LPG. 61

The gross calorific value of the fuel has been used for this efficiency calculation. The

test data from which it has been calculated has been certified by Advantica

Certification services (0087). The efficiency value may be used in the UK

Government's Standard Assessment Procedure (SAP) for energy rating of dwellings.

The conversion of net efficiency to gross was achieved by multiplying the net

efficiency by the following conversion factor from Table E3 of SAP 2005, rounding

down to the nearest whole number.

3. GENERAL INSTALLATION REQUIREMENTS

3.1 The installation must be in accordance with these instructions.

For the user’s protection, in the United Kingdom it is the law that all gas appliances

are installed by competent persons in accordance with the current edition of the Gas

Safety (Installation and Use) Regulations. Failure to install the appliance correctly

could lead to prosecution. CORGI requires its members to work to recognised

standards.

In the United Kingdom the installation must also be in accordance with:

All the relevant parts of local regulations.

All relevant codes of practice.

The relevant parts of the current editions of the following British Standards:-

BS 715

BS EN 1856 Part 1

BS EN 1858 which replaces BS 1289 Part 1

BS EN 1806 which replaces BS 1289 Part 2

BS EN 1856 Part 1 which replaces BS 4543 Part 2

BS 5440 Part 1

BS 5440 Part 2

BS 6461 Part 1

BS 1251

BS EN 1806

BS 5871 Part 2

Page 8

INSTALLER GUIDE

Gas Conversion factor from net to gross efficiency

Natural Gas 0.901

LPG 0.921

BS 6891

BS 8303

In England and Wales, the current edition of the Building Regulations issued by the

Department of the Environment and the Welsh Office

In Scotland, the current edition of the Building Standards (Scotland) Regulations

issued by the Scottish Executive.

In Northern Ireland, the current edition of the Building regulations (Northern Ireland)

issued by the Department of the Environment for Northern Ireland.

In the republic of Ireland the installation must be carried out by a competent person

and also conform to the relevant parts of:

a) The current edition of IS 813 “Domestic Gas Installations”

b) All relevant national and local rules in force.

Where no specific instructions are given, reference should be made to the relevant

British Standard Code of Practice.

3.2 In the United Kingdom, as supplied, the appliance can be installed in the

following situations: -

3.2.1 To a fireplace complete with surround and hearth as shown in figure 1 and

complying with BS1251 after removal of the fireback and sufficient material behind the

fireback for a debris catchment space. The required fireplace, hearth, debris

catchment area and clearance dimensions are shown in figure 1.

Page 9

Figure 1. Hearth and fireplace opening dimensions

INSTALLER GUIDE

2.1.1 ‘Hole-in-the-wall’ Installations

! It is recommended that a hearth should be installed as in section 3.9.

!Icon firefront

If when using the Icon firefront a Hearth is not fitted, the fire must be installed so

that the distance from the base of the fireplace opening in the wall to the

finished floor level is at least 100mm. Where there is no floor covering or carpet

and the floor is of a type that is likely to be covered in such a way in the future

then the distance from the base of the fireplace opening in the wall to the floor

level should be increased to at least 175mm.

Adorn, Dream, Visage, Obsession and Eternal firefront

If when using the Adorn, Dream, Visage, Obsession and Eternal firefronts a

reduced depth Hearth is fitted, the fire must be installed so that the distance

from the base of the fireplace opening in the wall to the finished floor level is at

least 100

mm. It is recommended that the reduced hearth has a depth from the

fixing plane of the fire of 100mm minimum. This is necessary to support the

lower front casting. Where there is no floor covering or carpet and the floor is of

a type that is likely to be covered in such a way in the future then the distance

from the base of the fireplace opening in the wall to the floor level should be

increased to at least 175mm.

To protect from the risk of burns and ignition of clothing a tactile separator shall

be used. The hearth detailed in section 3.9 meets the requirements for a tactile

separator. If this is not used then a 672mm long fender, kerb, horizontal bar, or

other barrier, being fixed not less than 50mm above floor level and positioned

300mm in front of the fixing

plane of the fire will meet

the requirement.

3.2.2 To a fireplace incorporating

a metal flue box complying with

the constructional requirements

of the current edition of BS715.

The dimensions of the flue box

must conform to those shown in

figure 2.

3.2.3 To a precast concrete or

clay flue block system conforming

to BS1289 with dimensions as in

figure 3. The current versions of

BS1289 and BS EN 1858

recommend that there should be

an air space or insulation

between the flue blocks and the

plaster because heat transfer

may cause cracking on directly

plastered flues. However, Page 10

INSTALLER GUIDE

Figure 2. Metal Flue box dimensions

Tabla de contenidos

Otros manuales de Chimenea de interior de Baxi Fires Division

Baxi Fires Division

Baxi Fires Division 754 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 754 Manual de usuario

Baxi Fires Division

Baxi Fires Division 755 Manual de usuario

Baxi Fires Division

Baxi Fires Division 949 Manual de usuario

Baxi Fires Division

Baxi Fires Division 750 Manual de usuario

Baxi Fires Division

Baxi Fires Division 347 Manual de usuario

Baxi Fires Division

Baxi Fires Division 746 monaco Manual de usuario

Baxi Fires Division

Baxi Fires Division 742 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 740FS Manual de usuario

Baxi Fires Division

Baxi Fires Division 341 Black Beauty Slimline Manual de usuario

Baxi Fires Division

Baxi Fires Division 939 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 941 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division Sonnet Plus Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 739 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 750 Manual de usuario

Baxi Fires Division

Baxi Fires Division 956 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 740FS Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division Heartbeat Oxysafe 2 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division Soraya 746 Manual de usuario

Baxi Fires Division

Baxi Fires Division 750 Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division soraya 747 Manual de usuario

Baxi Fires Division

Baxi Fires Division Dream BR660VA Instrucciones de montaje

Baxi Fires Division

Baxi Fires Division 742 Manual de usuario

Baxi Fires Division

Baxi Fires Division 756 Instrucciones de montaje

Manuales populares de Chimenea de interior de otras marcas

Brigantia

Brigantia 35-DVRS31N-2 Manual del propietario

Nordpeis

Nordpeis Bergen Manual de usuario

Superior

Superior BCT2536TMN Manual de usuario

Quadra-Fire

Quadra-Fire 5100I-GD-B Manual de usuario

Renaissance

Renaissance RUMFORD 1000 Manual de usuario

Lacunza

Lacunza IV-800 Manual de usuario

Baxi

Baxi 940 Instrucciones de uso

Dru

Dru Maestro 60/2 Tall RCH Manual de usuario

Diamond Fireglass

Diamond Fireglass SS-O22 Manual de usuario

HearthStone

HearthStone Windsor Bay 8830 Manual de programación

Napoleon

Napoleon ASCENT B42 Manual de usuario

Enviro

Enviro E33GI Manual de usuario

Smeg

Smeg L30 FABE Instrucciones de montaje

KEDDY

KEDDY K700 Manual de usuario

Godin

Godin 3451 Manual de usuario

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manual de usuario

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manual de usuario

Desa

Desa CCFPDFT Manual de operación