1 INTRODUCTION
Congratulations on your choice of a Baumalight
Skid Steer Brush Cutt to complement your brush
cutting operation. This equipment has been
designed and manufactured to meet the needs of
a discriminating buyer for efcient brush cutting.
Models CF360 and CF560 have two blades and
can cut a path 60 inches wide. Models CF372 and
CF572 have four blades and can cut a path 72
inches wide. The unique blade design reduces the
brush to mulch. Controlling the Brush Cutt is done
completely from the cab of the skid steer providing
the ability for precise control and all day operator
comfort.
Safe, efcient and trouble free operation of your
Brush Cutt requires that you and anyone else
who will be operating or maintaining the Brush
Cutt, read and understand the Safety, Operation,
Maintenance and Troubleshooting information
contained within the Operator’s Manual.
This manual covers the Baumalight Skid Steer
Brush Cutt, models CF360, CF372, CF560 and
CF572. Use the Table of Contents as a guide to
locate required information.
Keep this manual handy for frequent reference
and to pass on to new operators or owners. Call
your Baumalight dealer, distributor or the factory
if you need assistance, information or additional
copies of the manuals.
OPERATOR ORIENTATION - The directions left,
right, front and rear, as mentioned throughout this
manual, are as seen from the skid steer driver’s
seat and facing in the direction of travel.
The brush cutter is designed to be used by
experienced operators, trained in the safe
operation of a skid steer and trained in the hazards
related to using the brush cutter and the safe use
of the cutter for the intended purpose. Operators
will require personal protective equipment to
reduce the risk from some hazards that cannot be
completely eliminated or controlled by the design
of the tool.
Care is required to ensure that the brush cutter
tool will not come across metallic objects, stones
or other materials.
Brush Cutt tools are not designed for use in
hazardous atmospheres where there is a risk
of re or explosion due to ammable gases or
vapors. Use in hazardous, explosive atmospheres
is prohibited.
Serious injury or death of the operator or bystanders
may be caused if the tool is misused. Misuse may
also cause damage to the machine carrying the
implement.
1.2 Intended Use And
Foreseeable Misuse
1.1 Overview
1
