Bauhn APPS-0423 Manual de usuario
User Manual
MODEL: APPS-0423
Portable
Party Speaker
AFTER SALES SUPPORT
1300 002 534
tempo.org/support
MODEL: APPS-0423 PRODUCT CODE: 710656 04/2023
AUS
2
Welcome
Congratulations on your purchase!
This manual tells you all you need to know about using your new BAUHN®product.
Please take special note of any important safety and usage information presented with the symbol.
All products brought to you by BAUHN®are manufactured to the highest standards of performance and safety and,
as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty.
Domestic use only: This product is intended for indoor domestic use only. Do not use this product for anything other
than its intended purpose, and only use it as described in this manual.
We hope you will enjoy using your purchase for many years to come.
3
Contents
Welcome 2
Unpack and Prepare 4
Product Overview 5
Remote Control 7
Wireless Microphone 9
Operation 10
Troubleshooting 14
Specications 16
Compliance and Responsible Disposal 17
Warranty Information 18
Repair and Refurbished Goods or Parts Notice 19
4 | UNPACK AND PREPARE
Unpack and Prepare
What's in the box
Before setting up your new product, check you have everything:
A. Portable Party Speaker
B. Remote Control
C. AAA Activ Energy Batteries (2)
D. Wireless Microphone
E. AA Activ Energy Batteries (2)
F. AC Power Cable
G. AC Power Adaptor
H. Warranty Certificate
I. General Safety Warnings
J. User Manual
PRODUCT OVERVIEW | 5
Product Overview
Speaker Overview
LED display screen &
Remote sensor
Tweeter
Woofers
See the next page for the
control panel buttons
Control Panel
(see next page)
6 | PRODUCT OVERVIEW
Control Panel
1
2
3
4
5
6
7 8 9 10
11
12
13
14
15
16
17
18
1 USB Slot: insert your USB for music playback
2 Micro SD (TF) Card Slot : insert Micro SD/TF card for music
playback
3 (Repeat): repeat current song
4 Mic Volume Knob: adjust microphone or guitar volume
5 REC: to record voice recordings to USB/Micro SD card
6 LIGHT SW ( ): press to change the speaker light effect
Press repeatedly to change between light effects/turn light
effect off. (Note: this effect does not work when on FM
mode)
7 AUX In Port
8 MIC 1/MIC 2: input for wired microphones (not included)
9 GUITAR (GT): input for guitar (not included)
10 Power switch: press to turn speaker on/off
11 : play previous song
12 : play/pause song
13 : play next song
14 Volume Knob: adjust volume level
15 MODE (M): press to switch between USB, Micro SD, AUX,
FM and Bluetooth®mode
16 TREBLE/BASS: press to select treble/bass and turn the
volume knob to adjust level. Press and hold to turn mega
bass on/off
17 MIC GT: press to adjust microphone or guitar volume
18 DC IN Port
Rear Panel
REMOTE CONTROL | 7
Precautions When Using Batteries
• Do not use old and new batteries together.
• Do not use different types of batteries (e.g.
Manganese and Alkaline batteries) together.
• Remove the batteries from the remote if you do not
intend to use it for a long time.
• When discarding used batteries, follow any
guidelines for recycling and disposal of batteries
that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to
extreme heat.
Remote Control
Setup
Insert the supplied AAA Activ Energy Batteries according to
the polarity markings (+ / -) inside the compartment. Make
sure the batteries are correctly aligned and properly pushed
into place.
2
3
1
AAA size
batteries
included
8 | REMOTE CONTROL
Remote Overview
MI
MODE : Press to switch between input
modes
GT.VOL+ :Press to increase guitar volume
level
GT.VOL- :Press to decrease guitar volume
level
: Select next song/next FM station
: Play/pause, auto scan FM stations
TREBLE+ : Press to increase treble level
VOLUME + : Increase volume level
LIGHT SW : Press to change the speaker
light effect. Press repeatedly to change
between light effects/turn light effect off
M.VOL - : Decrease microphone volume
level
BASS+ : Increase bass level
M.BASS+ : Increase microphone bass level
M.BASS- : Decrease microphone bass level
FOLDER : Select between folders if USB/
Micro SD card have folders
REC : Start recording
MUTE : Mute the sound. Press again to
unmute
NUMBER BUTTONS : Numerical input to
directly play a track.
ECHO+ : Press to increase echo level
ECHO- : Press to decrease echo level
EQ : Change EQ mode
: Select previous song/previous FM
station
TREBLE- : Press to decrease treble level
M.VOL + : Increase microphone volume
level
VOLUME - : Decrease volume level
BASS- : Decrease bass level
M.TRE- :Decrease microphone treble level
M.TRE+ :Increase microphone treble level
MIC.PRI : Turn microphone priority on
REPEAT : Repeat song
WIRELESS MICROPHONE | 9
Wireless Microphone
1 Battery indicator (red LED when mic is on)
2 On/Off switch
3 Battery cover (twist to open)
Precautions When Using Batteries
• Do not use old and new batteries together.
• Do not use different types of batteries (e.g.
Manganese and Alkaline batteries) together.
• Remove the batteries from the microphone if you
do not intend to use it for a long time.
• When discarding used batteries, follow any
guidelines for recycling and disposal of batteries
that apply in your local area.
• Keep batteries away from children and pets.
• Never throw batteries into a fire or expose them to
extreme heat.
Setup
Insert the supplied AA Activ
Energy Batteries according to
the polarity markings (+ / -)
inside the compartment. Make
sure the batteries are correctly
aligned and properly pushed
into place.
2
1
AA size
batteries
included
3
10 | OPERATION
Operation
Charging and Power on
• Charging: plug in the supplied power adaptor to the DC IN port to charge the speaker for 6-7 hours before use. During
charging, the battery icon on the LED display screen will ash. Please disconnect and unplug the power adaptor after charging.
• Power on: press the POWER switch on the speaker to turn the speaker on.
Control Panel Operations
• Use the / buttons on the speaker or the PREVIOUS/NEXT buttons on the remote control to navigate between songs/FM
stations.
• Use the volume knob on the speaker or the VOLUME-/VOLUME+ buttons on the remote control to adjust the volume.
• Use the MODE button to switch between the input modes. The LED display screen will show the current input mode the
speaker is on.
Battery Status
• You can view the battery status of the speaker on the LED display screen. When the battery is low, a voice notication will be
heard. Please plug in the supplied power adaptor to charge the speaker.
LED Light
• The speakers have LED lights across the front of the speaker. Press the LIGHT EFFECT button on the speaker or Light SW
button on the remote control to turn the lights on/off. (Note: this effect does not work when on FM mode).
Tabla de contenidos
Otros manuales de Altavoces portátiles de Bauhn
