Batelco SignalBoost Manual de usuario

SignalBoost

User Guide

Home and oce mobile coverage Booster.

Contents

For Your Safety ................................................................................3

Welcome ........................................................................................5

Permitted Phones And Other Mobile Devices.....................................5

Setup Preparation............................................................................6

Box Contents...................................................................................6

Connectors .....................................................................................6

LED Lights .......................................................................................6

Quick Setup .....................................................................................7

Help With SignalBoost AP Setup ...................................................... 8

Network And Broadband Requirements ........................................... 8

Fast Broadband Service................................................................ 8

Available Network Connection ..................................................... 9

IP Address For Your SignalBoost.................................................... 9

Placement Of Your SignalBoost ...................................................... 10

About The LEDs On Your nano3G AP..................................................11

Frequently Asked Questions ........................................................... 12

Troubleshooting............................................................................ 13

General Information...................................................................... 14

Firewall Settings............................................................................ 14

Product Speciﬁcation..................................................................... 14

Cleaning ....................................................................................... 14

General Notices ............................................................................. 15

Notice........................................................................................ 15

Trademarks And Permissions....................................................... 15

Open Source Declaration............................................................. 15

Warranty Disclaimer................................................................... 15

Import And Export Regulations................................................... 15

Disposal And Recycling ............................................................... 15

Hazardous Substances ................................................................ 15

Regulatory Notices ........................................................................ 16

US FCC Compliance ..................................................................... 16

EU Regulatory Compliance .......................................................... 16

Safety Standards ........................................................................ 16

Company Information ................................................................... 17

For Your Safety

Read this section carefully before using this product and its accessories to ensure

proper and safe operation.

This is a safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

Electrical Safety

WARNING

• Do not use the SignalBoost near ﬂammable or explosive sub-

stances. Heat from SignalBoost may cause these substances to

ignite.

• Do not put any objects through any openings on the SignalBoost

or its mains adaptor. Failure to do so may result in ﬁre or electric

shock.

• To avoid the risk of ﬁre and/or electrical shock, do not overload

power outlets or extension cables.

CAUTION

• The SignalBoost, like other RF devices, may interfere with pace-

maker operation. Individuals with pacemakers should avoid

close proximity to theSignalBoost while it is in operation. Con-

sult your doctor if you have questions about RF signals and your

pacemaker.

Electrical Safety continued

NOTICE

• The SignalBoost is intended for indoor application only and must

be kept dry at all times. Any moisture may damage the device. If

evidence of condensation is present, unplug the SignalBoost im-

mediately and do not operate until completely dry.

• Do not disassemble the SignalBoost or its mains adaptor for any

reason.

• Do not attempt to power the SignalBoost with any power adapter

other than the one included with your device. If the included

power adapter does not appear to be working, contact your mo-

bile service provider to obtain a replacement.

• Before using the mains adaptor, verify that the mains voltage is

within the range speciﬁed by the voltage printed on the mains

adaptor.

• When disconnecting the mains adaptor from the mains, pull the

plug. Pulling the cable may result in damage to the cable.

Interference with Electronic Devices

• Installing the SignalBoost adjacent to any unshielded electronic

devices may result in electronic interference.

• The SignalBoost may interfere with hearing aids.

Welcome

Thank you for choosing the SignalBoost

Access Point (AP). Your SignalBoost

provides personal coverage of voice and

data services to your 3G mobile cellular

devices in your home.

Your SignalBoost only works

with 3G capable mobile

phones and devices.

Permitted Phones And Other Mobile Devices

Your SignalBoost provides cellular coverage to 3G mobile phones and devices.

Types of devices include: 3G mobile phones, 3G dongles for laptops, tablets/pads

with 3G capability. Up to 8 of these can use your SignalBoost for communication

at the same time. Only devices that obtain 3G services from the same mobile ser-

vice provider that supplied the SignalBoost are permitted to use the SignalBoost.

Setup Preparation

Box Contents

Remove everything from the box and check that you have these items:

The SignalBoost

unit

Universal mains

adaptor unit

Ethernet network

cable

This manual

If any items are damaged or missing, contact the retail outlet or your

mobile service provider.

Connectors

Your SignalBoost has two connectors:

• A 9V DC input for power.

• A LAN socket for connection to

the Internet via your home net-

work.

LED Lights

Your SignalBoost has three LED lights that

use colours and ﬂashing to show Power,

Ethernet and 3G service status.

For more information, please see About

The LEDs On Your SignalBoost on page 12.

Quick Setup

1) Make sure the SignalBoost is

mounted vertically on its

stand.

2) Plug the Ethernet cable into

the LAN socket and the

power cable into the into

the 9V DC socket of your

nano3G AP.

3) Plug the other end of the

Ethernet cable into a free

socket on your broadband

router or Ethernet switch.

In case of diculty at this

point, see page 9 for help.

4) Plug the mains adaptor into a

suitable power outlet.

5) Stand the SignalBoost vertically in the desired location and, if necessary,

switch on power at the mains outlet.

6) Wait for the SignalBoost to start providing service. At this point, the 3G

LED will be constantly lit green (no ﬂashing).

This should normally take about 10 minutes, but may

take up to 2 hours.

7) Use your phone as normal.

Help With SignalBoost Setup

Network And Broadband Requirements

To operate correctly, your SignalBoost requires:

• Access to the Internet via a fast broadband Internet service.

• An available Ethernet network connection on a router or switch.

• An IP address provided by the router.

Fast Broadband Service

The minimum recommended speeds are 1.5Mbps for downloads and 256kbps for

uploads. If possible, use a faster broadband service.

Your Internet service provider (ISP) can tell you the speed of your broadband ser-

vice. Please check with your mobile service provider if you are unsure that your

broadband service is fast enough for the SignalBoost.

Other equipment on your home network that uses the Internet may

impact the bandwidth available to your SignalBoost.

For example, streaming movies or playing online video games may use

a signiﬁcant part of your Internet download bandwidth, which may

prevent your SignalBoost from providing optimal service.

The SignalBoost requires an “always on” Internet connection. Switch-

ing o your broadband router and/or modem will stop your Signal-

Boost from providing service.

Available Network Connection

The availability of a network connection for your SignalBoost will depend on

which combination of the following items you have in your home network:

Broadband

modem

The unit supplied by your Internet service provider (ISP) which gives you a con-

nection to the Internet via the ISP’s network.

Broadband modems often have only one Ethernet socket on the home network

side. If this socket is already in use, typically by your computer, you will need a

broadband router to provide additional connections so that there is a spare con-

nection available for the SignalBoost.

As this type of broadband modem has only one Ethernet socket on the home

network side, it is not recommended to plug the SignalBoost directly into the

broadband modem, as this will exclude connections to any other devices on your

home network.

Broadband

modem/router

If the unit providing the connection to your ISP’s network has multiple connec-

tions and/or it has a wireless antenna, this means it is a combined broadband

modem/router. This has the same capabilities as a broadband modem, plus the

broadband router capabilities described below.

Broadband

router

A broadband router for home use will have a dedicated Ethernet port (or WAN

port) for connecting to the broadband modem and then a number of Ethernet

ports (or LAN ports) for the home network. The router is the device that is capable

of allocating IP addresses.

If your router has a wireless interface (WiFi), this is not used by the nano3G AP.

A wireless router should have at least one spare Ethernet socket on the home

network side. If this is already in use by another device, you may need a separate

Ethernet switch to allow connection of multiple devices to the broadband router.

Ethernet

switch

An Ethernet switch is a simple device that adds more Ethernet connections to a

network. It will have a single connection back to the router, and then at least four

sockets for connecting extra equipment, including further Ethernet switches.

If there are no spare Ethernet connections in your home network, an Ethernet

switch is an option for resolving this.

Each time your Signalboost your router. The feature that provides this is called

DHCP (Dynamic Host Control Protocol). Broadband routers for home networks

often have this feature enabled by default. Ensure this feature is enabled on your

router, which may be referred to as a “DHCP Server” or similar.

Placement Of Your Signalboost

The SignalBoost is a wireless transmitter. For maximum coverage, place your

SignalBoost in a central location. Alternatively, locate it in the room where you

use your mobile phones and other 3G devices most frequently.

CAUTION

Ensure that the Signalboost cables are out of the way of high trac areas, chil-

dren and household pets to avoid choking, tripping, or damage to the cables

and the nano3G AP.

Place the AP vertically on a ﬂat stable surface.

Where possible, place the Signalboost high up to give it a good ‘line of

sight’.

Do not position the AP close to large electrical objects. For example:

televisions, refrigerators, microwave ovens, hi-ﬁ equipment and

speakers. This is to avoid interference with the signal.

Place the AP in a location that allows free air circulation around the

unit to avoid overheating.

Put the Signalboost clear of surrounding objects.

The recommended minimum clearance is 10cm around the Signal-

boost .

Do not position the AP where it will be directly aected by a heat

source, including direct sunlight.

Tabla de contenidos

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario