Device parameters
BPT50-A is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Setting numerical parameter value
Enter parameter value adjustment mode
(see 'Program Levels').
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
To select another digit, press .
The 4 rightmost digits can accept values
from 0to9, and the leftmost digit
can accept the value -or none.
To increase or decrease the blinking digit
value, use respectively or .
Confirm the adjusted value by pressing
simultaneously + .
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
Enter parameter value adjustment mode
(see 'Program Levels').
Read the blinking parameter value.
To change the value, use or ,
and to confirm, press + .
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
