Bartec Auto ID Ltd. SW Version: R.59.0 (English) 2019
IMPORTANT NOTICES
SAFETY DEFINITIONS
All Danger, Warning, Important, and Note messages must be followed for your safety. These safety
messages are in the following form
DANGER: Means you may risk possible loss of life.
WARNING: Means you may risk possible bodily harm.
CAUTION: Means you risk damage to the vehicle or the tool.
These safety messages cover situations Bartec is aware of. Bartec cannot know, evaluate and advise
you as to all the possible hazards. You must be certain that any conditions or service procedures
encountered do not jeopardise your personal safety.
COPYRIGHT
No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of Bartec.
DISCLAIMER
All information, illustrations, and specifications contained in this technical instruction manual are
based on the latest information available at the time of publication. The right is reserved to make
changes at any time without obligation to notify any person or organization of such revisions or
changes. Further, Bartec shall not be liable for errors contained with the furnishing, performance or
use of this material.
SAFETY PRECAUTIONS
Read carefully the installation, operating and maintenance instructions in the Operator’s manual.
Do not allow unqualified persons to use this equipment. This will prevent injury to persons and
damage to the equipment.
The work place must be dry, sufficiently lit and well ventilated.
Do not forget that breathing carbon monoxide (odourless) can be very dangerous and even fatal.
When working on the vehicle:
•Wear suitable clothing and act in such a way as to prevent industrial accidents.
•Before starting, check to be certain the gear shift is in neutral (or in PARK (P) if the transmission
is automatic) and put the handbrake on and check to be sure the wheels are completely
locked.
•Do not smoke or use naked flames when working on a vehicle.
•Wear safety glasses to protect your eyes from dirt, dust or metal chips.
Disposing of equipment
