Bargeheights BAR 252 Manual de usuario

User Manual

RGB Linear Wash Luminaire

BAR 252

1. THEBEGINNING

Thanks!

Thank you for choosing the Bargeheights BAR 252! This versa-

tile linear LED wash luminaire will provide reliable performance

day in and day out. To ensure long lasting performance, please

follow the guidelines in this manual. The instructions here are

important for your safety and the maintenance of this xture.

Enjoy!

Unpacking

All of our luminaires are thoroughly tested prior to being

shipped. While your BAR 252 functioned perfectly when it left

us, it may have been bumped around during shipping. Please

inspect the carton and if you notice any damage, take a good

look at the xture. If you see any damage, it is important to

contact our support team right away. And, if you nd any pieces

necessary for operation are missing – let us know! We’ll make it

right as soon as possible.

Support

If something is not working properly, let us know! Grab a

computer or your favorite handheld device and head to

www.bargeheightslighting.com/support for user manuals,

DMX channel lists and support information. You can also email

us at [email protected]. We’re happy to help.

WARNING!

To reduce the risk of re or electrical shock, do not attempt to

use this xture with any covers missing or removed.

The Bargeheights BAR 252 carries a one-year (365 day) manu-

facturers’ limited warranty. Please contact Bargeheights for

warranty repair or returns. All returns require an RA (Return

Authorization) number. If your xture is still under warranty,

TABLEOFCONTENTS

1. The Beginning

Unpacking

Support

Introduction

DMX Quick Reference

2. Safety Information

3. Setup

DMX Cabling

DMX Termination

3-pin vs. 5-pin

Master/Slave Mode

4. Operation/Conguration

Menu Structure

DMX Control Mode

DMX Channel Functions

Control Functions

Standalone Control Modes

Master/Slave Mode

Technical Specications

Photometric Data

5. Care/Maintenance

Returns

Shipping Damage

Introduction

• Linear LED Wash Luminaire

• Full RGB color mixing via 252 LEDs

(108 Red, 72 Green, 72 Blue)

• High output, low power consumption

• Variable electronic strobe/dimmer

• 3 segments individually controllable within single unit

• Master/Slave modes

• Built-in standalone modes - no controller required!

• RGB color mixing ability in standalone mode

• Rugged aluminum chassis

DMX Quick Reference

Channel Function

1 Color + Strobe Control

2Speed OR Intensity /

Strobe Control

3 Red Intensity

4 Green Intensity

5 Blue Intensity

6 Red Segment 1 Intensity

7 Green Segment 1 Intensity

8 Blue Segment 1 Intensity

9 Red Segment 2 Intensity

10 Green Segment 2 Intensity

11 Blue Segment 2 Intensity

12 Red Segment 3 Intensity

13 Green Segment 3 Intensity

14 Blue Segment 3 Intensity

2. SAFETYINFORMATION

• DO NOT connect the xture into a dimmer. Use constant line voltage only to

avoid damage.

• Make sure you are connecting the xture to line voltage that is not higher

than the voltage stated on the rear of the xture.

• The BAR 252 is for indoor use only. Do not expose the xture to rain, or

other moisture. The BAR 252 cannot be used as a water ski.

• Do not operate the xture with ammable items nearby. NEVER lay anything

on the xture while it is on.

• ALWAYS disconnect the xture from its power source before servicing or

cleaning.

• DO NOT operate when the ambient temperatures are higher than 104°F

(40°C). If it’s too hot for you, it’s too hot for your BAR 252!

• If your BAR 252 stops working properly, stop using it immediately. NEVER

try to repair it yourself. Attempting repairs in the eld can result in damage or

injury. Please contact us for repairs or replacement.

• Make sure the power cord is not frayed or damaged.

• Never disconnect the power cord by pulling on the cord. Use the plug!

• Avoid direct eye exposure to the light source while it is on. It’s cool looking,

and fun to watch, but staring into the light can damage your eyes!

There are no user serviceable parts inside this xture. Do not

open the housing or attempt any repairs yourself. Not only is it

a bad idea, it will void your warranty – which is a bummer when

you need a working light! If you do need service, please contact

Bargeheights. Damages sustained as a result of modications

to the xture, or disregarding information in this manual will

not be covered by your warranty. If something is wrong, let us

take a look at it. We’ll help you out!

!Caution!

3. SETUP

DMX Cabling

The BAR 252 has standard 3-pin XLR connectors for DMX con-

trol and daisy-chaining. Up to 32 devices can be daisy-chained

together on a single run. Standard microphone cables will

probably work OK, but DMX is a serial data transmission with

impedance specications that are different than analog audio.

Cables specically designed to transmit DMX signals will always

work best. As an example, Belden© 9841 meets the specica-

tions for DMX-512 applications. The longer the cable distance,

the more important proper cable selection is.

DMX Termination

Sometimes, errors will crop up in your DMX line – especially if it

is a long run. When this is the case, or if you just want to make

sure your DMX runs have the best chance at accurate transmis-

sion, you can use a terminator. A terminator is a 120 ohm ¼

watt resistor which is connected between pins 2 and 3 of a male

XLR connector (DATA + and DATA -). This connector is inserted

in the female XLR connector of the last xture in your daisy

chain to terminate the line. Using a cable terminator will de-

crease the possibility of erratic behavior. Terminators are avail-

able on the internet and from lighting retailers. If you’re handy

with a soldering iron, they are simple to build yourself!

120 Ohm resistor

¼ watt

DMX Terminator

3-pin XLR Male connector

Shield

Data +

Data -

3-pin vs. 5-pin

Some manufacturers use 5-pin XLR connectors for DMX trans-

mission. Don’t worry! The two are still compatible. Adapters are

available on the internet and from lighting retailers. If you want

to build your own, here are the proper connections:

Cable Conductor 3-pin Female

(output)

5-pin Male

(input)

Shield (Ground) Pin 1 Pin 1

DMX Data + Pin 2 Pin 2

DMX Data - Pin 3 Pin 3

not connected - not connected

Master/Slave Mode

The BAR 252 also has a Master/Slave mode. In this mode you

can set one xture in the line to act as the master controller –

and up to 32 other xtures can be connected and will mirror the

operation of the rst. In this conguration, you do not need a

DMX controller.

Connect the xtures just as

you would for DMX control.

See the OPERATION sec-

tion of this manual for more

information on how to set up

Master/Slave mode.

DMX IN DMX OUT

Master Fixture

Slave Fixture

to next xture

4. OPERATION/CONFIGURATION

We here at Bargeheights don’t really care for DIP switches.

They are hard to see in the dark, and since most of us don’t

quickly think in binary, they are tricky to set properly. The

BAR 252 has an LED display with a simple menu system. There

are four control buttons below the display that allow you to

navigate the control menus.

<MODE> – Go up a level in the menu system

<+> – Scroll to the next higher number or menu selection

<-> – Scroll to the next lower number or menu selection

<ENTER> – Select the current number / menu selection

To access the main menu press the <MODE> button. Use the

<+> or <-> buttons to navigate through the menu options.

Press the <ENTER> button to select the option displayed, and

use the <+> or <-> buttons to change the settings. Once your

changes are made press <ENTER> to accept the change.

8888

Mode + - Enter

Menu Structure

A001

CL01

SP01

dnCo

SP16

dnCo

Auto

SLAU

CL01

A512

CL09

CL11

CL03

CL06

CL13

CL02

CL10

CL12

CL04

CL07

CL14

CL05

CL08

DMX Address Setting

Red

Orange

Yellow

Green

Cyan

Blue

Pink

Magenta

White

Sound Control : Color

Random Strobe/Color

Color Chase Segments - Speed Control

Color Fade Random - Speed Control

Color Random - Speed Control

Speed Control: 1 - 16

DMX Control Mode

Standalone Mode

Slave Mode

DMX Control Mode

To change the DMX starting address:

• Press <MODE> until A001 is displayed.

• Press <ENTER> to display the channel number, and press

<+> or <-> to select your starting address. (1-512)

• Press <ENTER> to assign your selection.

Ensure your BAR 252 is in DMX Control Mode:

• Press <MODE> until the Control Mode is displayed.

( dnCo Auto SLAU )

• Press <+> or <-> and select dnCo.

• Press <ENTER> to conrm your change.

DMX Channel Functions

Channel Channel Value Function

0-15

16-25

26-35

36-45

46-55

56-65

66-75

76-85

86-95

96-105

106-115

116-125

126-135

136-145

146-155

156-165

166-175

176-185

186-195

196-205

206-215

216-225

226-235

236-245

246-255

Strobe Off

Color Cycling Strobe

Color Cycling Triple Strobe

Color Cycling Pulse Fade

Color Cycle

Random Color Fade

White Segment Chase

Red Segment Chase

Green Segment Chase

Blue Segment Chase

Yellow Segment Chase

Magenta Segment Chase

Cyan Segment Chase

Cyan + R Segment Chase

Mag + G Segment Chase

Yel + B Segment Chase

Red + B/G Segment Chase

White Neg R/B Seg Chase

White Neg R/G Seg Chase

R - G - B Segment Chase

C - M - Y Segment Chase

Color Cycling Seg Chase

Add Color Cycl Seg Chase

Random Strobe / Color

Full Red

0-64

65-128

129-192

193-245

246-255

Intensity (0-100%)

Strobe Slow -> Fast

Triple Strobe Slow -> Fast

Pulse Fade Slow -> Fast

Full Intensity

3 0-255 Red Intensity

4 0-255 Green Intensity

5 0-255 Blue Intensity

6 0-255 Red Segment 1 Intensity

7 0-255 Green Segment 1 Intensity

8 0-255 Blue Segment 1 Intensity

9 0-255 Red Segment 2 Intensity

10 0-255 Green Segment 2 Intensity

11 0-255 Blue Segment 2 Intensity

12 0-255 Red Segment 3 Intensity

13 0-255 Green Segment 3 Intensity

14 0-255 Blue Segment 3 Intensity

Control Functions

When utilizing DMX Channel 1 to control preset effects, DMX

Channel 2 controls the speed of the effects, slow -> fast.

(0-255)

If Channel 1 is at 0, then Channel 2 controls Intensity/Strobe

with the selected color from Channels 3-14.

To control RGB overall color, or to control individual segment

RGB colors, Channel 2 must be either between 0-64 for Inten-

sity control, or at 255 (Full) for Channels 3-14 to function.

Standalone Control Modes

The BAR 252 has several standalone control modes that do not

require a DMX control signal.

Ensure your BAR 252 is in Standalone Control Mode:

• Press <MODE> until the Control Mode is displayed.

( dnCo Auto SLAU )

• Press <+> or <-> and select Auto.

• Press <ENTER> to conrm your change.

Select the desired Standalone function:

• Press <MODE> until the Standalone function is displayed.

CL01 – Red

CL02 – Orange

CL03 – Yellow

CL04 – Green

CL05 – Cyan

CL06 – Blue

CL07 – Pink

CL08 – Magenta

CL09 – White

CL10 – Sound Control : Color

CL11 – Random Strobe/Color

CL12 – Color Chase Segments - Speed Control

CL13 – Color Fade Random - Speed Control

CL14 – Color Random - Speed Control

• Press <ENTER> to conrm your change.

The BAR 252 also has speed control for several of the Stand-

alone Control Modes.

• Press <MODE> to display the selected speed. There are 16

speeds, from fast to slow. SP01 is slow – SP16 is fast.

Master/Slave Mode

Up to 32 BAR 252s may be connected via the 3-pin DMX con-

nections and controlled simultaneously without a DMX control-

ler by using Master/Slave Mode. In this mode you can set one

xture in the line to act as the master controller – and up to 32

other xtures can be connected and will mirror the operation of

the Master.

To ensure your BAR 252 is in Slave Mode:

• Press <MODE> until the Control Mode is displayed.

( dnCo Auto SLAU )

• Press <+> or <-> and select SLAU.

• Press <ENTER> to conrm your change.

To set your BAR 252 in Master Mode, set it up just as you would

for a Standalone Control Mode.

• Press <MODE> until the Control Mode is displayed.

( dnCo Auto SLAU )

• Press <+> or <-> and select Auto.

• Press <ENTER> to conrm your change.

Then you can select the function on the Master xture and

watch the Slave xtures follow.

Technical Specications:

Model: BAR 252

LEDs: 252 x 10mm (108 Red, 72 Green, 72 Blue)

Voltage: 100-240v / 50-60Hz

Dimensions: 3.25in (h) x 2.5in (w) x 42in (l)

82.5mm (h) x 63.5mm (w) x 1066mm (l)

Weight: 5lbs (2.25Kg)

Power

Consumption: 50 watts

DMX Channels: 14 channels

Beam Spread: 35 degree approximate spread

Setup & Addressing: LED Menu display – no dip switches!

Photometric Data:

Throw Distance 1.0m

3.2’

2.0m

6.6’

3.0m

9.8’

5.0m

16.4’

Beam Width .75m

1.8’

1.2m

3.9’

2.2m

7.2’

2.75m

9.0’

Illuminance (lux) 1150 450 195 55

Photometric data taken with all channels at full. Due to varia-

tions in all LEDs, these values should be considered approxi-

mate. All LED sources experience a lowering of output and

some color shift over time. LED output varies with ambient

operating temperatures.

5. CARE/MAINTENANCE

Your BAR 252 is designed for long life with minimal upkeep.

Since there are no lamps to replace, maintenance is simple -

just keep your BAR 252 clean and dry. Especially if you are in a

dusty or haze-lled environment, there are some simple steps

you can take to ensure a long, happy life for your BAR 252.

Keeping the lens area clean will ensure maximum light output.

Use glass cleaner on a soft cloth to wipe down the lens area

and the outer enclosure of the BAR 252 whenever it gets dirty

or dusty.

Any other repair or maintenance should be performed by quali-

ed individuals only. There are no user-serviceable parts in the

BAR 252. If you nd your BAR 252 behaving strangely, please

feel free to contact us and we’ll help with troubleshooting.

Returns

While your BAR 252 was tested and working perfectly before it

left to join your family, sometimes things can happen. If there’s

a problem, and you need to return your BAR 252 - don’t worry!

It’s easy.

Send an email to [email protected], and we’ll is-

sue you an RA (Return Authorization) number. Carefully pack

your BAR 252 for shipping - using the original box and packing

material, if possible. Use a prepaid, trackable shipping method,

such as UPS, FedEx or USPS Priority Mail.

Please include the following information with your xture so we

can best help you!

1. Your contact information (Name, Address, Phone Number,

Email address)

2. The RA# issued to you

3. A brief description of the problem/symptoms

We will take a look at the xture, and at our discretion, repair

or replace the xture. Please note that we cannot be responsi-

ble for damage that takes place during shipping - so make sure

you pack the xture well!

Page 16 BAR 252 User Manual rev. A

Shipping Damage

Damage incurred in shipping is the responsibility of the

shipper, and must be reported to the shipping company

immediately upon receipt of the items. Claims must be

made within seven (7) days of receipt.

bargeheights inc

www.bargeheights.com

Support: www.bargeheightslighting.com/support

[email protected]

859-317-2878

Tabla de contenidos

Otros manuales de Equipo de iluminación de Bargeheights

Bargeheights

Bargeheights LED 54AW Manual de usuario

Bargeheights

Bargeheights LED PAR Manual de usuario

Bargeheights

Bargeheights LED PAR Manual de usuario

Bargeheights

Bargeheights LED 36 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario