Baracoda orKan Manual de usuario
Data Capture
for Workforce
in Motion
orKan ‘barcode’ terminal
User Guide
© BARACODA TM, 2012
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
2/35
Revision History
Changes to the original manual are listed below.
Document Date Author Description
1.0 4th Jan. 2012 AP/TF Initial
1.1 6th Jan. 2012 TF VII.1 : GUI interface : LEDs table modified
1.2 11th April.2012 TF minor modifications
1.3 23rd April 2012 TF/AFR Add ‘XIRING – ingenico Healthcare/eID”
1.4 26th April 2012 TF FCC id completed for FCC submission
1.5 22nd May 2012 TF FCC paragraph modified following FCC request
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
3/35
I. Summary
Revision History................................................................................................................. 2
I. Summary..................................................................................................................... 3
II. Introduction................................................................................................................ 5
III. Product presentation.............................................................................................. 6
1) Front....................................................................................................................... 6
2) Side......................................................................................................................... 7
3) Top & Bottom........................................................................................................ 7
4) Back........................................................................................................................ 7
IV. Installing / replacing the protective boot............................................................... 8
V. Installing / replacing the battery ............................................................................... 9
VI. How to recharge the orKan terminal ? ............................................................... 10
VII. Switching the terminal ON/OFF......................................................................... 12
1) How to switch ON ? ............................................................................................ 12
2) How to switch OFF ? .......................................................................................... 13
VIII. GUI interface.................................................................................................... 14
1) LEDs..................................................................................................................... 14
2) Display.................................................................................................................. 14
3) ‘Frozen display’................................................................................................... 16
IX. Connecting your orKan terminal ........................................................................ 17
1) Slave mode (default) ........................................................................................... 17
2) Master mode....................................................................................................... 17
X. Configuring your orKan terminal........................................................................... 18
1) Reset to default settings...................................................................................... 18
2) Bluetooth Security Settings................................................................................ 18
3) Barcode Symbology Settings.............................................................................. 19
4) Data format.......................................................................................................... 19
5) Beeps, Vibrator and LEDs................................................................................. 20
6) Power Management ............................................................................................ 20
7) Low Battery......................................................................................................... 21
XI. How to capture data ?.......................................................................................... 22
1) orKan positionning to read barcode ................................................................. 22
2) Different usage modes......................................................................................... 23
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
4/35
a. Real Time mode................................................................................................ 23
b. Real Time mode –with No Data Loss option................................................... 23
c. Batch mode ....................................................................................................... 23
3) Different Reading modes.................................................................................... 24
a. Trigger mode (default setting) .......................................................................... 24
b. Aiming mode mode........................................................................................... 24
c. AutoScan mode................................................................................................. 24
d. Manual AutoScan mode.................................................................................... 24
XII. orKan embedded application(s)........................................................................... 25
1) Global structure.................................................................................................. 25
a. How to go into an application?......................................................................... 25
b. How to quit a running application .................................................................... 25
c. Terminal info .................................................................................................... 26
2) Application: Introduction .................................................................................. 26
3) Pre-loaded applications...................................................................................... 28
a. Standard ............................................................................................................ 28
b. Quantity............................................................................................................. 28
c. Delivery............................................................................................................. 28
d. Access Control.................................................................................................. 29
XIII. Connectivity Solution available for orKan...................................................... 31
1) Software solutions (for end-user) ...................................................................... 31
a. K-Emul.............................................................................................................. 31
b. BaracodaManager (for mobile host devices).................................................... 31
c. Baracoda Desktop Manager (for windows PC) ................................................ 31
2) Baracoda Software Development Kit (for developers & integrators)............ 31
XIV. Safety / Regulatory............................................................................................... 33
1) FCC ...................................................................................................................... 33
2) EU......................................................................................................................... 33
3) Laser notice (for orKan Laser –BOK-LA)...................................................... 34
XV. Limited Warranty................................................................................................. 35
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
5/35
II. Introduction
The orKan is easy to use - just press the trigger button in order to switch ON the terminal. Please
use the side buttons to change the current application and the trigger button to select the
application you want to use. To return to the main menu press the two side buttons at the same
time and select MAIN MENU using the trigger button. The colour of the LEDs indicates the
device status. A beep indicates that the terminal has connected to the remote host or that a
piece of data has been captured successfully. Acknowledgement of a completed scan is
configurable by the user.
Captured data (barcode…) read by orKan is transmitted in real time to the remote host using
Bluetooth wireless technology. It can also be stored in the terminal’s flash memory and later
uploaded to a remote host using Bluetooth wireless technology. You can download software
updates as well as additional documentation from http://www.baracoda.com after registration.
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
6/35
III. Product presentation
The orKan has two (2) LEDs, three (3) trigger buttons and one (1) OLED screen. They provide the
Bluetooth connection status and the reading status. The right-hand side LED is the Bluetooth
connection LED (BCL) and the left-hand size LED is the reading status LED (RSL).
1) Front
The function of the BCL is to give:
-the Bluetooth connection status of the terminal (connected or not connected).
-the operating mode of the terminal (Real Time mode, Batch mode or Master Mode).
The function of the RSL is to give:
-the information whether or not a piece of data has been captured.
-the battery level status. If the battery level is too low, you will need to recharge the
battery immediately.
Scan engine window
Connections with Cradle
Bluetooth Connection Led
(BCL)
Reading Status Led
(RSL)
Right button
Middle button (Trigger)
Left button
Lanyard
OLED
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
7/35
2) Side
On the right-hand side of the terminal you will find a micro USB socket. On the opposite
side one can find the lanyard used to get hold of the terminal more easily.
3) Top & Bottom
You will find the scan engine of the terminal in the top part. At the bottom the cradle
connector is installed.
4) Back
The label on the back side of the orKan terminal provides the
following information:
-the terminal model
-its Bluetooth MAC address
-its serial number
Scan engine
window
Connection with Cradle
USB
Lanyard
Label
Battery door
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
8/35
IV. Installing / replacing the protective boot
To put the protective boot on the terminal:
-put the string lanyard in its place
-put the terminal in the protective from bottom up as shown on the picture below
To remove the protective boot, please push the top part of the terminal.
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
9/35
V. Installing / replacing the battery
Please use only Baracoda-approved rechargeable batteries. The use of any other batteries may
damage the terminal and void the warranty.
To insert batteries into the orKan:
-use a coin to unlock and remove the battery cover at the back of the orKan
-turn the lock underneath the terminal to a vertical position (upwards).
Close Open
Put the Baracoda battery in its location. Please pay attention to well position the battery
connector.
Slide the cover from the bottom up and lock it into place.
Caution: There is a risk of explosion if the battery is replaced by an incorrect battery type.
Dispose of used batteries according to the instructions.
XIRING –Ingenico Healthcare / eID –Baracoda orKan ‘barcode’ – User Guide v1.5
10/35
VI. How to recharge the orKan terminal ?
The internal battery can be recharged by using the included AC adapter or a charging cradle
(optional). The adapter rating is 5V, 1,3A.
When the terminal is charging, the RSL led (left) is red (solid). When the terminal is fully
charged, the RSL led (left) is green (solid).
A full recharge (from completely drained batteries) takes approximately six (6) hours.
Make sure that the temperature is between 0°C and 35°C to recharge the
battery.
When the original batteries wear out, please contact your Baracoda reseller for replacements.
Open the USB cover
USB cover
Connect the power supply
Tabla de contenidos
Otros manuales de Terminal táctil de Baracoda
