5) 4 sharp "beeps" indicates that measurement is completed. At this point
you can read the temperature on the display.
6) The thermometer turns off automatically 1 minute after the measure-
ment has been completed. To turn off the blue positioning ray, turn the
protective cover. (Remember, if the cover is not closed, the blue ray will
continue to operate and use up the battery power).
Note:
Correct measurement can be taken at any distance up to 10 cm.
Important notes:
• For repeated measurements, always position the thermometer at the same
point on the forehead.
• After physical exercise, bathing or eating, wait 30 minutes before taking a
temperature reading.
• For greater accuracy wait at least 2 minutes between readings.
• When pointed toward a hot object, the thermometer detects the
temperature remotely. To prevent incorrect readings, position the
thermometer as soon as the "READY" message appears.
• Avoid direct sunlight, other sources of heat and direct air conditioning as
they can affect the forehead during the temperature reading,
modifying the result.
• If the light ray is no longer visible, replace its batteries.
• Never expose the thermometer to extreme temperatures, dust or
abrupt movements.
• Never let the thermometer get wet.
• Never use the thermometer on irritated skin or when the forehead
presents other problems.
• Never use the thermometer when the forehead is particularly sweaty, the
reading will not be reliable.
Memory function
The memory function records 8 readings and remembers them for 64
hours. The last reading performed before the thermometer is turned off
is recorded to memory. To use the memory function, tum the protective
cover (g.1,⑤), press the "M" button located under the probe (g.1,④),
and release it. The display alternates the following information four times:
• previous measurement;
• how many hours ago the measurement was taken.
7 8
