B&B Electronics Industrial Media Converter EIR102 Manual de usuario

EIR102 1308qsg-1/2

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] supp[email protected]

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] support@bb-europe.com

B&B ELECTRONICS QUICK START GUIDE

Package Contents

•EIR102 Series Industrial Media Converter

•Quick Start Guide (One per shipment)

•Power Terminal Block (installed)

•Fiber Optic Dust Covers (installed on fiber optic models)

If any item is missing or damaged, contact B&B Electronics

for a replacement

Front Panel

DIN Rail Mounting

Attach Power Leads

External Supply Required

Warning: Work Safe – Equipment

damage or electrical shock hazard

exists. DO NOT ATTACH OR REMOVE

LEADS WITH THE POWER SUPPLY

ENERGIZED!

1. Loosen the screw to open the terminal block lead clamp.

2. Insert the power lead. TB will accept 12-28 AWG wire.

3. Tighten the screw to close the terminal block lead clamp.

Ensure the clamp holds the lead securely. However, do not

over tighten.

NOTE: For replacement Terminal Block order Part # 7444.

EIR102 Series Quick Start

Guide

1 Power Terminal Block 2 Position, Removable

2 PWR LED ON When Power Applied

3 Fiber Optic SPD LED Normally OFF

3 Fiber Optic LINK LED On When Fiber Port Linked

4 Fiber Optic Ports No. & Type Depends on Model

5 RJ45 SPD LED ON if 100 mbps

5 RJ45 LINK LED ON When RJ45 Port Linked

FLASHES When Data Transmitted

6 DIP Switch 4 POS for Fiber to Fiber

6 POS for Copper to Fiber

7 RJ45 Port Depends on Model

Configure DIP Switch

1. Fiber to Copper

models have a 6

position switch.

2. Fiber to Fiber models

have a 4 position

switch.

3. Switches are

numbered from the

bottom.

4. Cycle power after

changing DIP Switch

configuration.

1. Slide and hold the DIN Clip toward the bottom of the

Media Converter. Angle the top portion of the DIN mount

over the top of the DIN rail.

2. Move the Media Converter so that it is parallel with the

DIN Rail.

3. Release the DIN clip. The spring should return it to its

original position.

EIR102 1308qsg-2/2

International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA

815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] supp[email protected]

European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland

+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] support@bb-europe.com

B&B ELECTRONICS QUICK START GUIDE

Attach RJ45 Cable

(

If e

)

MDI Cable Pinout

Pin Signal

1 Tx+

2 Tx-

3 Rx+

6 Rx-

MDI-X Cable Pinout

Pin Signal

1 Rx+

2 Rx-

3 Tx+

6 Tx-

Attach Fiber Optic Cable

Warning: Work Safe – This is a Class I

Laser/LED device. To avoid causing

serious damage to your eyes, DO NOT

STARE DIRECTLY INTO THE LIGHT.

Installation Com

let

1. When the network cables are attached and power

is applied, installation is complete.

NOTE: Recycle power if DIP Switch changes are

made after power up.

Female Connector

Mechanical Diagra

Fiber Optic Cable Information

Mode and Distance Type Wavelength

Multi-mode (2 km) 62.5/125 µm 1310 nm

Single-mode (15 km) 9/125 µm 1310 nm

Single-mode (40 km) 9/125 µm 1310 nm

Single-mode (80 km) 9/125 µm 1550 nm

Output Power RCVR Sensitivity

Multi-mode (2 km) -19 to -14 dBm ≤-32 dBm

Single-mode (15 km) -15 to -8 dBm ≤-32 dBm

Single-mode (40 km) -5 to 0 dBm ≤-34 dBm

Single-mode (80 km) -5 to 0 dBm ≤-34 dBm

1. Auto MDI/MDI-x is

supported. A straight

through or cross-over

cable may be used.

2. 10/100BaseT auto

negotiation and full/half-

duplex are supported.

Speed and duplex can

also be forced. Refer to

DIP Switch settings.

1. Ensure your fiber optic cable is terminated with

the correct connector type. EIR102 Media

Converters use SC or ST connectors.

2. Fiber optic type for each port is located on the

product’s side label. When connecting the cable

to the media converter, be sure to line up the

slider guide on the cable and media converter

connectors.

3. Connect the fiber optic transmitter to the

downstream device’s receiver and vice-versa.

Fiber Optic Cable

Inf

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Convertidor de medios de B&B Electronics

B&B Electronics

B&B Electronics Giga-McBasic-II Manual de usuario

B&B Electronics

B&B Electronics USOPTL4 Manual de usuario

B&B Electronics

B&B Electronics USR604 Manual de usuario

B&B Electronics

B&B Electronics ES1AE Manual de usuario

B&B Electronics

B&B Electronics MES1A Manual de usuario

B&B Electronics

B&B Electronics EIS Series Manual de usuario

B&B Electronics

B&B Electronics ELinx EIR-G-SFP-T Manual de usuario

B&B Electronics

B&B Electronics PES1A Manual de usuario

B&B Electronics

B&B Electronics ILinx FOSTCDRI-PH Series Manual de usuario

B&B Electronics

B&B Electronics 2IQEC2 Manual de usuario

B&B Electronics

B&B Electronics Giga-MiniMC 856-10730-RX Manual de usuario

B&B Electronics

B&B Electronics MES1A Manual de usuario

B&B Electronics

B&B Electronics iMcV-LIM 10/100 Manual de usuario

B&B Electronics

B&B Electronics RS-232 to Ethernet Converter ES1A Manual de usuario

B&B Electronics

B&B Electronics McPC MediaLinX Manual de usuario

B&B Electronics

B&B Electronics PES1A Manual de usuario

B&B Electronics

B&B Electronics BB-USR604 Manual de usuario

B&B Electronics

B&B Electronics 232CL9R Manual de usuario

B&B Electronics

B&B Electronics 485LDRC9 Manual de usuario

B&B Electronics

B&B Electronics High Speed Asynchronous to Synchronous Converter... Manual de usuario

B&B Electronics

B&B Electronics 485ABOIC Manual de usuario

B&B Electronics

B&B Electronics IE-Giga-MiniMc Manual de usuario

B&B Electronics

B&B Electronics RS-232 Baud Rate Converter CE 232BRC Manual de usuario

B&B Electronics

B&B Electronics Parallel Port Input/Output Converter PPIO Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario