Banana Pi BPI-M2 Series Manual de usuario

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

SinoVoip CO.,LTD

Banana PI BPI-M2

User Manual

<Version: V2.0 >

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

Banana PI BPI-M2 is the open source hardware platform,Banana PI BPI-M2 is an quad

core version of Banana Pi ,Banana PI BPI-M2 is the quad core more better than the

Banana Pi BPI-M1,it support WIFI on board.

Banana Pi BPI-M2 series run Android,Debian linux,Ubuntu linux, Raspberry Pi

image and others image.

Banana PI PBI-M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3

SDRAM,

Banana PI BPI-M2with Gigabit ethernet port, It can run with Android 4.4 smoothly.

The size of Banana PI BPI-M2 same as banana pi M1, it can easily run with the game

it support 1080P high definition video output, the GPIO compatible with Raspberry Pi

B+ and can run the ROM Image

Note: Banana Pi BPI-M2 not support sata port, so you need use USB for hardisk

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

Hardware Specification of Banana pi BPI-M2

Soc

A31S ARM Cortex-A7

CPU

A31S ARM Cortex-A7 quad-core,256 KB L1 cache 1 MB L2 cache

GPU

PowerVR SGX544MP2 · Comply with OpenGL ES 2.0, OpenCL 1.x, DX 9_3

SDRAM

1GB DDR3 (shared with GPU)

Power

5V @ 2A via DC power and/or MicroUSB (OTG)

Features

Low-level perpherials

40 Pins Header,28×GPIO, some of which can be used for specific functions

including UART, I2C, SPI, PWM, I2S, LRADC, ADC, LINE-IN.

On board Network

10/100/1000Mbps ethernet (Realtek RTL8211E/D)

Wifi Module

WiFi 802.11 b/g/n (AP 6181 module on board)

Bluetooth

Optional

On board Storage

MicroSD (TF) card，Not SATA support

Display

Supports multi-channel HD display:

HDMI 1.4 (Type A - full)

LVDS/RGB/CPU display interface (DSI) for raw LCD panels

11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC

standards

Video

HD H.264 2160p video decoding

Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc

H.264 high profile 1080p@30fps or 720p@60fps encoding

Audio outputs

HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S

audio (also potentially for audio input)

Camera

Parallel 8-bit camera interface

Audio input

On board micphone

USB

4 USB 2.0 host, 1 USB 2.0 OTG

Buttons

Reset button Power button&U-boot button

Leds

Power status Led and RJ45 Led

Other

IR reciever

Interface definition

Sizes

92 mm × 60mm

Weight

45g

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

Interface:

Use method

Step 1: Get what you need

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

First time to enjoy your Banana Pi, you need at least the accessories in the table

below.

No.

Item

Minimum recommended specification & notes

TF card

Minimum size 4Gb; class 4 (the class indicates how fast

the card is).

We recommend using branded SD cards as they are

more reliable.

HDMI(Full sized)

to HDMI / DVI

lead

HDMI to HDMI lead (for HD TVs and monitors with

HDMI input).

HDMI to DVI lead (for monitors with DVI input).

AV video lead

A standard AV video lead to connect to your analogue

display if you are not using the HDMI output.

Keyboard and

mouse

Any standard USB keyboard and mouse should work.

Keyboards or mice that take a lot of power from the

USB ports, however, may need a powered USB hub.

This may include some wireless devices.

Ethernet

cable/USB

WiFi(Optional)

Networking is optional, although it makes updating and

getting new software for your Banana Pi much easier.

Micro USB power

adapter

A good quality, micro USB power supply that can

provide at least 700mA at 5Vis essential.

Many mobile phone chargers are suitable—check the

label on the plug.

Audio lead

(Optional)

You can choose a 3.5mm jack audio led to connect to

audio port to get stereo audio.

Mobile Hard disk

(Optional)

You can choose to connect a mobile hard disk to usb

port to store more files.

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

HDMI to HDMI lead

HDMI to DVI lead

AV video lead

SD card

Micro USB power adapter

Step 2: Download the relevant Image file:

Please visit our webmaster: www.bananapi.com to download image, banana pi all

image can be download form this web.

Step3: Prepare your SD card for the Banana Pi M2

In order to enjoy your Banana Pi M2, you will need to install an Operating System

(OS) onto an SD card. Instructions below will teach you how to write an OS image to

your SD card under Windows and Linux.

1. Insert your SD card into your computer. The size of SD should be larger than

the OS image size, generally 4GB or greater.

2. Format the SD card.

Windows:

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

Download the a SD card format tool such as SD Formatter from

https://www.sdcard.org/downloads/formatter_4/eula_windows/

i. Unzip the download file and run the setup.exe to install the tool on

your machine.

ii. In the "Options" menu, set "FORMAT TYPE" option to QUICK,

"FORMAT SIZE ADJUSTMENT" option to "ON".

iii. Check that the SD card you inserted matches the one selected by the

Tool.

iv. Click the “Format” button.

Linux:

v. Run fdisk –l command to check the SD card node.

vi. Run sudo fdisk /dev/sdxcommand to delete all partition of SD card.

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

vii. Run mkfs –t vfat /dev/sdxcommand to format the entire SD card as

FAT.

(x should be replaced according to your SD card node)

3. Download the OS image from Download district.

4. Unzip the download file to get the OS image.

Windows: Right click on the file and choose “Extract all”.

Linux: Run unzip [downloaded filename] command.

5. Write the image file to the SD card.

Windows:

i. Download a tool that can wirte image to SD card, such as Win32

Diskimager from:

http://sourceforge.net/projects/win32diskimager/files/Archive/

ii. Open the unzipped image file.

iii. Click Write button. Wait patiently to successfully complete writing.

Linux:

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

iv. Run fdisk –l command to check the SD card node.

v. Run dd if=[imagename] of=/dev/sdxcommand to write image file to

SD card. Wait patiently to successfully complete writing.

Step4: Set up your Banana Pi M2

According to the set up diagram below, you can easily set up your Banana Pi.

1. Insert the written-image SD card that to the SD card spot on the left side edge

of the underside of the board.

2. On the bottom "edge" in the middle of the board is the HDMI Type A (Full

sized) port. Just connect any HDMI cable from the board to your TV or HDMI

Monitor.

If you don't have an TV/Monitor with a HDMI or DVI-D port you can use the

yellow AV jack located in the middle of the "top" edge and the 3.5 mm stereo

headphone jack to the right of it.

3. Plug a USB keyboard and mouse into the USB slots located on the right edge.

4. Just under the USB ports on the right edge is the ethernet connector for anyone

who wants to plug the Banana Pi into a wired network.

5. Finally, at the very left of the bottom edge is the micro-usb power

connector. Plug in a regulated power supply that is rated at 5V ±5% and at

least 700mA (or 0.7A). Any number bigger than 700 mA (like 1000mA) will

also work. Avoid using the smaller chargers used for small GSM phones, as

these are often unregulated, even if they claim "5V 1A", they may do "5V"

and may do "1A", but not at the same time!

The mini-USB (on the left) is the wrong one. It’s thicker and looks like a

trapezoid with its sides pinched in. The micro-USB (on the right) is the

correct one. It is thinner and also looks like a trapezoid except it’s sides are

rounded outward.

Banana PI M2 User Manual

www.sinovoip.com.cn www.banana-pi.com

If all goes well, the Banana Pi will boot in a few minutes. The screen will display the

OS GUI.

Step5: Shut down your Banana Pi M2

Otros manuales para BPI-M2 Series

Tabla de contenidos

Otros manuales de Hardware de computadora de Banana Pi

Banana Pi

Banana Pi BPI-M2+ Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario