Baldwin Boxall BVRDTSM Manual de usuario
BVRDTSM Touchscreen
Microphone
Installation Instructions
Manual name: BVRDTSM Touchscreen Microphone
Issue: 1
ECR: N/A
Date of issue: an 2017
BVRDTSM Touchscreen Microphone
Installation Instructions
ii
BVRDTSM Touchscreen Microphone issue 1
© an 2017 Baldwin Boxall Communications Limited
Wealden Industrial Estate
Farningham Road, arvis Brook
Crowborough
East Sussex
TN6 2 R
UK
Telephone: +44 (0)1892 664422
Facsimile: +44 (0)1892 663146
Email: [email protected].uk
Website: http://www.baldwinboxall.co.uk
This equipment has been designed and manufactured to conform to the following
EC Standards:
EMC: EN55103-1 Environment Classification: E1,
EMC: EN55103-2 Environment Classification: E5,
Safety: EN60065
Failure to use the equipment in the manner described in the product literature
will invalidate the conformity.
A “Declaration of Conformity” statement to the above standards and a list of
auxiliary equipment used for compliance verification is available on request.
BVRDTSM Touchscreen Microphone
Installation Instructions
BVRDTSM Touchscreen Microphone issue 1
iii
Amendment Record ___________________________________ v
Proprietary Notice ____________________________________ v
Safety Information ___________________________________ vi
Comments_________________________________________ vi
Introduction
Microphone Options & Features __________________________2
Technical Specification _________________________________3
Installation
Hardware Configuration Options _________________________5
Audio Outputs _______________________________________6
Configuration Option - Live Page & AUX____________________7
Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Hardware Required - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Hardware Configuration - - - - - - - - - - - - - - - - - - - - - - - - 8
Cabling and Connection details - - - - - - - - - - - - - - - - - - - - - 9
Configuration Option - Dual Outputs _____________________ 10
Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Hardware Required - - - - - - - - - - - - - - - - - - - - - - - - - 10
Hardware Configuration - - - - - - - - - - - - - - - - - - - - - - - 10
Cabling and Connection details - - - - - - - - - - - - - - - - - - - - 11
Configuration Option - Live Page & Hardwired Bypass _________ 12
Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Hardware Required - - - - - - - - - - - - - - - - - - - - - - - - - 12
Hardware Configuration - - - - - - - - - - - - - - - - - - - - - - - 13
Cabling and Connection details - - - - - - - - - - - - - - - - - - - - 13
Configuration Option - Live Paging, AUX and Hardwired Bypass__ 14
Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Hardware Required - - - - - - - - - - - - - - - - - - - - - - - - - 14
Hardware Configuration - - - - - - - - - - - - - - - - - - - - - - - 15
Cabling and Connection details - - - - - - - - - - - - - - - - - - - - 15
Configuration Option - Dual Outputs & Hardwired Bypass ______ 16
Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
Hardware Required - - - - - - - - - - - - - - - - - - - - - - - - - 16
Hardware Configuration - - - - - - - - - - - - - - - - - - - - - - - 17
BVRDTSM Touchscreen Microphone
Installation Instructions
iv
BVRDTSM Touchscreen Microphone issue 1
Cabling and Connection details - - - - - - - - - - - - - - - - - - - - 17
BMS8/16 Termination Box _____________________________ 18
Recommended Cable Types____________________________ 18
Operating Instructions
Controls & Indicators ________________________________ 19
Operation_________________________________________ 20
User Accounts- - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Zone Selection - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
Groups - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Recording of User Messages - - - - - - - - - - - - - - - - - - - - - 22
Firmware Configuration
Introduction _______________________________________ 23
Entering Configuration Mode ___________________________ 23
Import / Export Configuration Settings ____________________ 24
BVRDTSM Touchscreen Microphone
Installation Instructions
BVRDTSM Touchscreen Microphone issue 1
v
A
MENDMENT
R
ECORD
P
ROPRIETARY
N
OTICE
All data and information contained within this manual is of a
proprietary nature with the exclusive title to the same held by
Baldwin Boxall Communications Limited. The possession of this
manual and the use of the information is, therefore, restricted
only to those persons duly authorised by Baldwin Boxall
Communications Limited.
Do not reproduce, transcribe, store in a retrieval system or
translate into any language, any part of this manual without the
prior permission of Baldwin Boxall Communications Limited.
n the interest of continual product development, Baldwin Boxall
Communications Limited reserves the right to make changes to
product specification without notice or liability. Use of Baldwin
Boxall Communications Limited products as critical components
in life support systems is not authorised except with express
written approval from Baldwin Boxall Communications Limited.
Change Note
Number
Nature of Amendment Date of
Amendment
N/A Issue 1: First Release an 2017
BVRDTSM Touchscreen Microphone
Installation Instructions
vi
BVRDTSM Touchscreen Microphone issue 1
S
AFETY
I
NFORMATION
Personnel who install, maintain or repair this equipment must
read the safety information below before starting work.
Voltages in excess of 30 Volts RMS or 50 Volts DC are considered
Hazardous and in certain circumstances can be lethal.
f Functional Testing, Maintenance, or Repair is to be completed
with the Mains Power (and/or battery backup) connected then
this should only be undertaken by personnel who are fully aware
of the danger involved and who have taken adequate precautions
and training.
This Manual contains Warnings, Cautions and Notes.
Warnings describe potential threats to health or life, e.g.
Cautions describe potential threats to the equipment, e.g.
Notes are statements that are useful to the user in the context of
a particular section of the manual, e.g.
C
OMMENTS
Comments regarding the content of this manual are welcome and
should be addressed to m[email protected].uk.
!
WARNI NG
Before attempting to remove this component, ensure the Mains
Power Supply and Battery Backup have been disconnected.
CAUT I O N
Notice must be taken of all cautions.
If a Caution is ignored the equipment may be damaged.
CAUT I O N: ELEC TR O -T AT IC EN IT IVE DEVICE
Observe the relevant precautions for the protection of Electro-
static Sensitive Devices when handling this equipment.
NOTE: Do not speak into the microphone until the "Speak Now" LED is
illuminated.
BVRDTSM Touchscreen Microphone
Installation Instructions
BVRDTSM Touchscreen Microphone issue 1
1
1 Introduction
The BVRDTSM Touchscreen Microphone has been designed to
provide a wide variety of features suitable for any installation.
Figure 1.1 — BVRDTSM Microphone
The Microphone is configured during commissioning using the in
built touchscreen. Standard RJ45 Network cable connections
(carrying both Audio and Serial Data) are employed, in order to
make installation simple and flexible.
BVRDTSM Touchscreen Microphone
Installation Instructions
2
BVRDTSM Touchscreen Microphone issue 1
1.1 M
ICROPHONE
O
PTIONS
& F
EATURES
The BVRDTSM microphone includes the following features as
standard:
• Fully monitored microphone, speech and data paths
• Ergonomic design with all buttons and displays mounted
behind a stylish overlay
• Performs as a Paging microphone (with emergency options
disabled) and as a Fire microphone only when the key switch
is turned
• 7" high brightness, capacitive touchscreen
• NFC Smart card access control with configurable
permissions per user
• Record, Preview and Broadcast non-emergency messages
• Scheduler to enable timed broadcast of non-emergency
messages
• Route background music sources to all zones
• Zone programmable volume adjustment
• Connect a background music source directly to the
microphone
• USB import and export of non-emergency messages,
configuration files and logs (fault and activity)
• All configuration performed via touchscreen, no other tools
required
• “Speak Now” indicator to show the user when a pre-
announcement chime has finished
• Simple bar graph display shows the user the current speaking
volume to ensure a clear announcement is made
• Ability to select router stored emergency messages
• Voice alarm system Active indicator
• Option to add emergency “All Call” bypass facility
• Option for dual output facility (audio, data and power) for
connection to dual systems
BVRDTSM Touchscreen Microphone
Installation Instructions
BVRDTSM Touchscreen Microphone issue 1
3
1.2 T
ECHNICAL
S
PECIFICATION
Audio
Nominal Output Level 0dBM
Max Output (limiter operating) +6dBM
Output Impedance 180R
Frequency Response (-3dB) 200Hz - 12KHz
Power Requirement (24V DC)
Standby 0.175A
In Use 0.36A
erial Data Link (See note below)
RS485 Type 2 Protocol, 9600 Baud, 8 bit,
Even Parity, 1 Stop Bit
Dimensions (W x H x D)
BVRDTSM 275mm x 48mm x 177mm
NOTE: The RS48 Protocol is configured during the commissioning
process, the default values are shown above.
BVRDTSM Touchscreen Microphone
Installation Instructions
4
BVRDTSM Touchscreen Microphone issue 1
Otros manuales para BVRDTSM
2
Tabla de contenidos
Otros manuales de Micrófono de Baldwin Boxall
Baldwin Boxall
Baldwin Boxall BVRDTSM Manual de usuario
Baldwin Boxall
Baldwin Boxall BDM201 Manual de usuario
Baldwin Boxall
Baldwin Boxall BDM 208 Manual de usuario
Baldwin Boxall
Baldwin Boxall BVRD series Manual de usuario
Baldwin Boxall
Baldwin Boxall BDM 204 Manual de usuario
Baldwin Boxall
Baldwin Boxall BVRDTSM Manual de operación y mantenimiento
Baldwin Boxall
Baldwin Boxall BDM300 Manual de usuario
Baldwin Boxall
Baldwin Boxall BFM 400 Manual de usuario
Baldwin Boxall
Baldwin Boxall BDM 400 Manual de usuario
Baldwin Boxall
Baldwin Boxall BVR16M Manual de usuario
