BAFANG MM G510.750.C Manual de usuario

DEALER MANUAL FOR MOTOR

BF-DM-C-MM G510-EN November 2019

6.1 Introduction 

6.2 Specifications 3

6.2.1 Outline and geometric size 3

6.2.2 Surface 4

6.2.3 Storage Information 4

6.3 Drive Unit Installation 5

6.3.1 List of Tools to be used 5

6.3.2 Motor Installation 5

6.3.3 Cabling 7

6.3.4 Motor Cover Installation 9

6.3.5 Chain Wheel Installation 10

6.3.6 Crank Installation 10

6.3.7 External Speed Sensor Installation 11

6.4 Maintenance 12

CONTENT

6 DEALER MANUAL FOR M620

(MM G510.750/1000/1300.C)

2BF-DM-C-MM G510-EN November 2019

6.1 INTRODUCTION

•Product Model

MM G510.750.C

MM G510.1000.C

MM G510.1300.C

•Scope

Applies only to electrically powered pedelecs

developed or licensed by Bafang. It is suitable

for speed and cargo bikes, which have been

developed for road use. The engine is not

suitable for sport competitions.

•Identiﬁcation

The following graphic, is the identification

numbers of the product, which are shown on

the housing:

Note: Content in the label is important informa-

tion about this product. Please do not remove

the information from the motor.

DEALER MANUAL FOR MOTOR

BF-DM-C-MM G510-EN November 2019

6.2 SPECIFICATIONS

Motor model: MM G510 .750 / 1000 / 1300.C

Rated power (W) 750 / 1000 / 1300

Rated voltage (V) 48 / 52

Waterproof IP65

Certiﬁcation CE / ROHS / EN14766

Outdoor Temperatures -20℃~45℃

6.2.1 Outline and geometric size

4BF-DM-C-MM G510-EN November 2019

Chain line(CL): 48 / 70mm

Shaft standard: ISIS

6.2.2 Surface

Shockproof black coating

6.2.3 Storage Information

The pedelec should be stored in a ventilated dry room. Avoid storing the pedelec near strong magnetic

objects.

DEALER MANUAL FOR MOTOR

BF-DM-C-MM G510-EN November 2019

6.3 DRIVE UNIT INSTALLATION

6.3.1 List of Tools to be used

Use of the Tools Tools

To fasten bolts onto the frame adapter and the drive unit Internal hex wrench

To fasten nuts onto the frame adapter and the drive unit Socket spanner

To fasten screws on the motor cover and cable cover Cross screwdriver

To fasten or remove lock nuts on the chain wheel Special tools

To fasten M15 nuts onto the cranks Internal hex wrench

6.3.2 Motor Installation

1) Mount the motor on the frame.

6BF-DM-C-MM G510-EN November 2019

2) Align the three mounting holes of the drive unit with the mounting holes in the bike frame. From the

right of the bike frame insert three special M8 bolts (A) into the mounting holes in the bike frame and the

drive unit.

M8 Special bolts

M8 Flat washer-A

M8 Locknuts

Standard tool

3) From the left, fasten the three M8 Lock-nuts with a ﬂat washer on the bike frame.

Tightening torque: 35 N.m.

DEALER MANUAL FOR MOTOR

BF-DM-C-MM G510-EN November 2019

6.3.3 Cabling

Note: Please attention and make sure that the cable cannot be squeezed by the motor and frame.

6.3.3.1 Connection of the battery cables to the motor

The male connector (red/

positive) from the battery

The male connector (red/

positive) from the motor

The female connector (black/

negative) from the battery

The female connector (black/

negative) from the motor

Please connect the connectors from the motor and battery together.

6.3.3.2 Connection of the speed sensor to the motor

The female connector from

the motor

The male connector from the

speed sensor

Please connect the connectors from the motor and the speed sensor together.

8BF-DM-C-MM G510-EN November 2019

6.3.3.3 Connection of the EB-BUS to the motor

The male connector from

the motor

The female connector from

the EB-BUS cable

Please connect the connectors from the motor and EB-BUS cable together.

6.3.3.4 Connection of the headlight cable to the motor

The male connector from the

motor

The female connector from

the headlight cable

Please connect the connectors from the motor and the headlight cable together.

6.3.3.5 Connection of the taillight cable to the motor

The female connector from

the motor

The male connector from the

taillight cable

Please connect the connectors from the motor and the taillight cable together.

DEALER MANUAL FOR MOTOR

BF-DM-C-MM G510-EN November 2019

6.3.3.6 Connection of the communication to the motor

The female connector from

the battery BMS

The male connector from the

motor

Please connect the connectors from the motor and the battery BMS together.

6.3.4 Motor Cover Installation

Motor cover

M3*8 star socket screws

Fasten the motor-cover with three screws M3*8 into in the frame adapter.

The torque requirement:1.5 N.m.

10 BF-DM-C-MM G510-EN November 2019

6.3.5 Chain Wheel Installation

Chain wheel

Lock nut

Special tool

Put the chain wheel onto the spline shaft of the drive unit. Use a special tool to fasten the lock nut onto

the spline shaft. Torque: 35 Nm.

An impact wrench cannot be used.

6.3.6 Crank Installation

M15 inner hexagon screws

Right crank

Left crank

Mount the crank (B,C) on the axel, tighten M15 inner hexagon screws at both sides of the motor. (torque

requirement: 45-50N.m)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Motor de BAFANG

BAFANG

BAFANG M400 Manual de usuario

BAFANG

BAFANG FM G370.250.V Manual de usuario

BAFANG

BAFANG MM G333.250.C Manual de usuario

BAFANG

BAFANG FM G320.250.R Manual de usuario

BAFANG

BAFANG RM G370.250.DC Manual de usuario

BAFANG

BAFANG M420 Manual de usuario

BAFANG

BAFANG H300 Manual de usuario

BAFANG

BAFANG MM G532.250.C Manual de usuario

BAFANG

BAFANG M420 Manual de usuario

BAFANG

BAFANG H600 Manual de usuario

BAFANG

BAFANG H620 Manual de usuario

BAFANG

BAFANG H550 Manual de usuario

BAFANG

BAFANG RM G062.750.D Manual de usuario

BAFANG

BAFANG H400 Manual de usuario

BAFANG

BAFANG FM G312.250.D Manual de usuario

BAFANG

BAFANG MAX Drive System Manual de usuario

BAFANG

BAFANG H610 Manual de usuario

Manuales populares de Motor de otras marcas

Rotax

Rotax 125 senior MAX evo Manual de usuario

Kohler

Kohler K361 Manual de usuario

MTD

MTD OHV Series Manual de usuario

Kohler

Kohler COMMAND CH18-745 Manual de usuario

Mercury

Mercury D4.2L D-Tronic Manual de usuario

Selve

Selve SE Plus-RC Series Manual de usuario

Perkins

Perkins 1206E-E66TA Manual de usuario

Skov

Skov DA 174 Manual

Rossi

Rossi TX11 Series Manual de usuario

Siemens

Siemens SIMOTICS T-1FW3 Hoja de instrucciones

AL-KO

AL-KO PRO 350 Manual de usuario

MTU

MTU 12 V 4000 Lx4 Manual de usuario

Nanni

Nanni N3.30 Manual de instrucciones

Nanni

Nanni N5.160 CR2 Manual de usuario

KSB

KSB SuPreme Series Instrucciones de instalación

Hiwin

Hiwin EM1 Series Manual de usuario

Rotax

Rotax 912 i series Instrucciones de funcionamiento

Siemens

Siemens SIMOTICS XP 1MB1 Manual de usuario