Back to Basics BLENDER SOLUTION Manual de usuario

BLENDER SOLUTION™

Instruction Manual

www.focuselectrics.com

Important Safeguards ..............................................................................................2

Assembling Your Blender ........................................................................................ 3

Using Your Blender ................................................................................................. 4

Speed Selection Guide.............................................................................................5

Using Your Food Processor Attachment (if included)...............................................7

Helpful Hints.............................................................................................................8

Cleaning Your Appliance........................................................................................ 10

Recipes .................................................................................................................11

Warranty ................................................................................................................ 15

SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE

www.focuselectrics.com

IMPORTANT SAFEGUARDS

To prevent personal injury or property damage, read and follow all instructions

and warnings.

When using electrical appliances, basic safety precautions should always be

followed including the following:

•Read all instructions, including these important safeguards and the care and use

instructions in this manual.

•To protect against electrical shock, do not put the cord, plug or the motor

assembly in water or other liquid.

•Close supervision is necessary when this appliance is used by or near children.

•Unplug the appliance from outlet when not in use, before putting on or taking off

parts and before cleaning.

•Avoid contact with moving parts.

•Do not operate this appliance with a damaged cord or plug, after the appliance

malfunctions or if the appliance is dropped or damaged in any manner. If you

experience any problems with your machine, unplug it immediately from the

electrical outlet. For service information see warranty page.

•The use of accessory attachments, including canning jars, not recommended or

sold by Focus Electrics may cause fire, electric shock or injury.

•Do not use outdoors.

•Do not let the cord hang over the edge of a table or counter.

•Do not let the cord come into contact with hot surfaces, including a stove.

•Do not place on or near a hot gas or electrical burner or in a heated oven.

•Do not use this appliance for other than its intended use.

•Turn off the machine before removing the blending jar from the base and before

placing the blending jar on the base.

•Do not run motor without blending jar properly attached to motor base or when

blending jar is empty.

•Keep hands and utensils (other than included stir stick) out of blending jar while

mixing ingredients to reduce risk of severe injury to persons or damage to the

machine.

•Blades are sharp; handle carefully.

•Always operate the appliance with the lid in place.

•Do not blend excessively hot liquids. Never pour boiling water into the blending

jar.

•Be sure to turn switch to “OFF” position after each use.

•To disconnect, grip plug and pull from wall outlet. Never pull on cord to

disconnect.

To prevent personal injury or property damage, read and follow all instructions

and warnings.

•Never leave the house while the appliance is on.

•A short power-supply cord is provided to reduce risks resulting from becoming

entangled in or tripping over a longer cord.

•Longer, detachable power-supply cords or extension cords are available and

may be used if care is exercised in their use. While use of an extension cord is

not recommended, if you must use one, the marked electrical rating of the

detachable power-supply cord or extension cord should be at least as great as

the electrical rating of the appliance. If the appliance is of the grounded type, the

extension cord should be a grounding-type 3-wire cord. The cord should be

arranged so that it will not hang over the counter top or tabletop where it can be

pulled by children or tripped over.

•After running the motor continuously for ninety seconds, wait at least three

minutes before running the motor again.

•This appliance has a polarized plug (one blade is wider than the other). To

reduce the risk of electric shock, this plug is intended to fit into a polarized outlet

only one way. If the plug does not fit fully into the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician. Do not attempt to modify the plug

in any way.

•To reduce the risk of injury, never place cutter-assembly blades on base without

blending jar properly attached.

•For household use only.

SAVE THESE INSTRUCTIONS

ASSEMBLING YOUR BLENDER

Before assembling your blender, wash all parts, except for the motor base in

warm, soapy water, rinse thoroughly and dry. Unscrew and disassemble the valve

for cleaning (see Cleaning Your Appliance section). To prolong the life of your

appliance, do not wash parts in the dishwasher.

1. Position the rubber gasket down onto the circular flat surface in the blender or

smoothie blade base.

2. Screw the blade base onto the bottom of the blending jar by twisting the blade

base clockwise until tightened. Make sure that the blade base is tightly fastened

to the blending jar and that the rubber gasket is properly compressed between

the blending jar and the blade base.

3. Press the lid onto the top of the blending jar. Press the clear lid cap in the

center of the lid or place the stir stick through the center of the lid if blending

liquids or frozen drinks.

4. Place the blending jar onto the motor base so that the bottom of the blade base

is sitting flat on the motor base.

5. Plug in the cord. Your blender is now ready to use.

Stir Stick

Lid Cap

Lid

Blending Jar

Dispensing Valve

Motor Base

Rubber Gasket

Blender Blade Base

Smoothie Blade Base

USING YOUR BLENDER

CONTROL BUTTONS:

PULSE - gives short bursts of power at high speed. Use “PULSE” to begin the

mixing of ice and other hard ingredients.

HIGH – runs the appliance at high speed. Use this speed for the final stages of

mixing. Do not use this speed for dispensing.

MED – runs the appliance at medium speed. Use this speed for the majority of

blending tasks.

LOW - runs the appliance at low speed. Use this speed for the initial 30 seconds of

mixing as well as for dispensing.

OFF - turns the appliance off.

BLENDER OPERATION

1. Assemble the blender blade base onto the blending jar.

2. Add ingredients to the blending jar and replace the lid. You may add more

ingredients through the hole in the center of the lid. Cover the hole with the

clear lid cap or stir stick during operation. Note: Add liquid ingredients first then

add frozen or solid ingredients. This will prevent excessive wear and stress on

the motor.

3. To start blending, choose a speed for blending the ingredients on the dial switch

and then press the “ON” button.

4. To stop blending press the “OFF” button.

5. The “PULSE” button allows you to create short bursts of power. To use the

“PULSE” function, repeatedly press and release the “PULSE” button. The

“PULSE” function should be used in the initial stage of blending ice and frozen

ingredients for smoothies and other frozen drinks. The “PULSE” function should

also be used to break apart larger pieces of food or to control the texture of food

when chunkier results are desired.

SPEED SELECTION GUIDE

INGREDIENTS SPEED RESULT

Salsa Low Chunky

Nuts Low Coarse

Bread, Cookies, Crackers Low Coarse

Heavy Whipping Cream Low Thick

Mayonnaise Medium Creamy

Salad Dressing Medium Creamy

Hard Cheese Pulse and then Medium Coarse

Grating/Chopping Citrus Zest Medium Fine

Smoothies, Cocktails, Shakes Pulse and then High Thick and Smooth

Baby Foods/Fruit & Vegetable

Purees High Smooth and Creamy

Spices High Fine

SMOOTHIE MAKER OPERATION

To make your favorite frozen drinks, follow the steps below.

1. Assemble the smoothie blade base, with dispensing valve, onto the blending jar.

2. ADD LIQUIDS – Add any combination of liquid ingredients up to the LIQUIDS

mark under SERVES 2 or SERVES 4 located on the blending jar. Liquids

include any soft ingredients such as fruit, milk, fruit juice, herbal supplements, or

yogurt in any combination you think would be tasty.

We are, of course, partial to the Back to Basics®smoothie mixes, which quickly

and easily make three delicious 8-ounce smoothies.

3. ADD ICE – Add ice or frozen ingredients until the total level reaches the

FROZEN INGREDIENTS line on the side of the blending jar. Frozen ingredients

include ice, frozen fruit, frozen yogurt, ice cream, etc.

4. SMOOTH IT – With the lid on and the stir stick (use as directed

below) set in the hole on the lid, pulse the mixture 3 to 5 times

by pressing the “PULSE” button. Move the switch to “LOW”

and press the “ON” button for about 30 seconds. Move the

switch to the “HIGH” position and wait until the ingredients are

completely mixed.

STIR STICK OPERATION – When in use and while the

machine is running, stir or rotate the Stir Stick in a counter-

clockwise direction so that the Stir Stick scrapes or contacts

the sides of the blending jar. This stirring operation will aid in

mixing the contents of the blending jar by forcing the

ingredients into the mixing blades.

5. SERVE IT – To serve the smoothie, turn the appliance “ON”, move the dial to

“LOW”, place a cup under the valve and press down on the valve lever. Stir the

contents in the blending jar with the stir stick while dispensing thick smoothies.

As the smoothie level reaches the bottom of the blending jar, a thick mix may

stop dispensing. Add a few tablespoons of liquid to increase flow. When the

blending jar is empty, turn the machine “OFF” and enjoy. You can continue

making smoothies one after another, but be sure to give the smoothie maker a

3-minute break after 90 seconds of continuous use.

•To make a thicker smoothie, add more frozen ingredients.

•To make a thinner smoothie, add more liquid ingredients.

USING YOUR FOOD PROCESSOR (if included)

Food Pusher/Measuring

Cup

Feed Tube

Food Processor Lid

Chopping Blade

Mixing Container

Gear Base

Motor Base

To use your Food Processor Attachment, the mixing container must be assembled

properly and the blade and lid must be locked into place. Begin assembling by

following the simple steps below.

1. Hold the gear base in one hand and the mixing container in the other hand.

Twist the mixing container clockwise onto the gear base.

2. Place the gear base with the attached mixing container onto the motor base.

3. Place the chopping blade over the shaft in the mixing container. The chopping

blade should slide easily to the bottom of the mixing container. The lower blade

will almost touch the bottom.

4. Place the food to be processed into the mixing container. To attach the lid onto

the mixing container, turn the lid clockwise until it fits into position. The lid lock

must click into the locked position prior to use. Note: The chopping blade will

not turn until the gear base, mixing container, and lid are locked into place. If

you have trouble fitting the lid onto the mixing container, turn the chopping blade

slightly and replace the lid.

5. Plug the appliance into an electrical outlet. Push the “ON” button to start

chopping or pureeing. While the food processor can be used at “LOW”, “MED”

or “HIGH” speeds, the “MED” speed is recommended for all food processing

jobs. It is recommended that one hand be placed on the food processor lid

while in use to provide more stability. CAUTION: Always use the food pusher

to guide food through the feed tube. Never use your fingers or other utensils

because damage to the appliance or injury could occur.

6. To stop chopping or pureeing, press the “OFF” button. When the blades have

stopped spinning unplug the appliance from the electrical outlet.

Note: For pulse-chopping, press and release the “PULSE” button until the

ingredients reach the desired consistency. The motor will run as long as you

hold the “PULSE” button down. The motor stops when you release the

“PULSE” button. For best results, allow enough time between pulses for the

food to fall back to the bottom of the mixing container.

7. Remove the lid by turning it counter-clockwise. Note: Never try to remove the

lid and the mixing container together as this can damage the appliance.

8. Be careful not to let the chopping blade fall out of the mixing container as you

empty it. To prevent this from happening, carefully remove the chopping blade

by lifting up on the plastic hub before attempting to pour out the processed food,

or hold the top of the plastic hub in place with your finger while pouring.

9. To remove the mixing container from the motor base, turn the handle of the

mixing container counter-clockwise and lift the mixing container straight up.

Note: Occasionally, a piece of food may become wedged between the

chopping blade and the mixing container. If this happens, unplug the appliance,

remove the lid, carefully lift the chopping blade out and remove the wedged

piece.

HELPFUL HINTS

•Cut food into approximately ¾” pieces. You will get a more even chop if

you start with pieces that are all the same size.

•The chopping blade should be in place before adding food into the mixing

container.

•You can put up to 1 cup of food in the mixing container at a time. Chop

food in batches if you want to process more.

•Watch the food closely. With the pulse/chopping technique you can get an

even chop without over-processing the food.

•For a coarse chop, pulse only a few times.

•For a finer chop or puree, press the “ON” button and let the food processor

run continuously at “MED” speed until the food is chopped to desired

consistency. Do not operate motor base for longer than 90 seconds at a

time.

•Unplug the appliance and use a plastic spatula to scrape down any pieces

that stick to the inside of the mixing container.

•You may add liquid or small pieces of food to the mixing container while the

appliance is operating by dropping them through the feed tube located on

the food processor lid.

•When chopping dry ingredients such as bread crumbs, nuts, spices, etc.,

make sure that the blending jar, or mixing container, and blade bases are

completely dry.

•The “PULSE” button should be operated in short bursts. As the “PULSE”

button is pressed and released, the blades should stop rotating between

pulses.

•Do not attempt to mix or knead heavy dough, mash potatoes, or beat egg

whites.

•Do not over-blend foods. Most ingredients should be properly blended or

chopped in seconds. Do not operate the motor base for longer than 90

seconds at a time.

•If the motor stalls, turn off and unplug the appliance. Remove a portion of

the ingredients before attempting to continue.

•Do not add boiling liquids to the blending jar or mixing container.

FOOD PREPARATION

Fruits and vegetables Peel and core if necessary. Remove

large, hard pits and seeds. Cut into ¾-

inch pieces and process up to 2 cups at

a time.

Meat, poultry and fish Meat should be cold but not frozen.

First, cut into ¾-inch pieces. Put up to ½

pound of meat in mixing container.

Pulse or run the motor continuously until

the desired consistency is reached.

Check texture every 2 or 3 seconds to

avoid over-processing.

Bread, crackers or cookies Break into 1-inch pieces and process

continuously until the desired texture is

reached.

Hard cheese If cheese is too hard to cut with a knife,

don’t try to chop it in the food processor

as it may damage the chopping blade.

(Do not attempt to chop parmesan

cheese in the food processor). Cut

cheese into ½-inch pieces. Pulse the

motor until the desired consistency is

reached. Do not attempt to process

more than 3 ounces of cheese at one

time.

Whipping cream Cream must be at refrigerator

temperature. Whip up to 1 cup at a time.

CLEANING YOUR APPLIANCE

1. Switch to “OFF” and unplug from electrical outlet.

2. Wipe the motor base with a damp cloth or sponge. To remove stubborn spots,

use a mild, non-abrasive cleanser.

3. Remove blade base and rubber gasket from the blending jar. Unscrew and

disassemble the dispensing valve. Carefully wash all parts except the motor

base in warm, soapy water, rinse and dry thoroughly. To prolong the life of your

appliance, do not wash parts in the dishwasher.

CLEANING THE DISPENSING VALVE

1. Remove the valve from the smoothie blade base by unscrewing the entire valve

counter-clockwise.

2. Remove the cap from the valve body by unscrewing it counter-clockwise.

3. Squeeze cap and stopper together and slide the lever off the stopper pin.

4. Remove the spring.

5. Remove the stopper and stopper pin by pulling the rubber rim of the stopper.

The stopper and pin are tightly fit and need not be separated.

6. Clean all parts in warm, soapy water, allow to dry thoroughly and reassemble in

the order shown.

Lever

Cap

Spring

Stopper Pin

Stopper

Valve Body

Tabla de contenidos

Idiomas:

Otros manuales de Licuadora de Back to Basics

Back to Basics

Back to Basics SMOOTHIESPLASH SSP4 Manual de usuario

Back to Basics

Back to Basics Blender Solution 5500 Manual de usuario

Back to Basics

Back to Basics CLASSIC SCL5 Manual de usuario

Back to Basics

Back to Basics SMOOTHIE TWIST SJR400T Manual de usuario

Back to Basics

Back to Basics FB500 Manual de usuario

Back to Basics

Back to Basics Blender Express Manual de usuario

Back to Basics

Back to Basics cocoa grande Manual de usuario

Back to Basics

Back to Basics Blender Express Manual de usuario

Back to Basics

Back to Basics Solution 5000 Manual de usuario

Back to Basics

Back to Basics EXPRESS Manual de usuario

Back to Basics

Back to Basics Smoothie Professional Manual de usuario

Back to Basics

Back to Basics Health Blender Manual de usuario

Back to Basics

Back to Basics SMOOTHIE CHOICE SM600 Manual de usuario

Back to Basics

Back to Basics blender solution 4000 Manual de usuario

Back to Basics

Back to Basics Smoothie Signature II Manual de usuario

Back to Basics

Back to Basics SMOOTHIE ELITE SE2000 Manual de usuario

Back to Basics

Back to Basics Blender Solution 5500 Manual de usuario

Back to Basics

Back to Basics Chris Freytag BPE3CF Manual de usuario

Back to Basics

Back to Basics SITSJRLP Manual de usuario

Back to Basics

Back to Basics SMOOTHIEBLAST SJR1X Manual de usuario

Back to Basics

Back to Basics SMOOTHIE SWIRL SJR1Y Manual de usuario

Back to Basics

Back to Basics BPE3BRAUS Manual de usuario

Back to Basics

Back to Basics ICE MASTER 3000 Manual de usuario

Back to Basics

Back to Basics SMOOTHIE SIGNATURE SALPHA500 Manual de usuario

Manuales populares de Licuadora de otras marcas

ROTOR

ROTOR 1125.201 Manual de usuario

Braun

Braun Multiquick 5 Vario series Manual de usuario

ARENDO

ARENDO MIRA 305424 Manual de usuario

CHEF-BUILT

CHEF-BUILT CCB-3500 Manual de usuario

Viconte

Viconte VC-4406 Manual de usuario

Oster

Oster BLSTAB-CB0 Manual de usuario

HOFFEN

HOFFEN MC-3005 Manual de usuario

Black & Decker

Black & Decker BLC18750DM Manual de usuario

Sunbeam

Sunbeam 4182 Manual de usuario

Bialetti

Bialetti FMX35 Manual de usuario

Black & Decker

Black & Decker BL8000 Manual de usuario

Duronic

Duronic BL530 Manual de usuario

Exquisit

Exquisit MS 3002 wes Manual de usuario

Lumme

Lumme LU-KP1891A Manual de usuario

Binatone

Binatone HB-735 Manual de usuario

Moulinex

Moulinex LM936E10 Manual de usuario

Oster

Oster VERSA Manual de instalación y operación

Ninja

Ninja NN210Q Manual de usuario