B-Link SemaConnect US Manual
A Blink Charging Company
COPYRIGHT © 2021Reserves the right to make changes to this product without further notice.
30kW Wall Mount
DC Fast Charger
User Manual & Installation Instructions
US
Model
CONTENT
Introductions ............................................................................. 1
Features .................................................................................... 1
Applications ............................................................................... 1
1. Basic User Interface ............................................................... 2
.......................................................................... 3
...................................................... 3
2.2 DW30 Version Description ................................................ 5
2.2 LED Indication and Operation Status ................................ 5
2.3 Dimmensions .................................................................. 6
2.4 Direction of cooling Airflow .............................................. 7
3. Installation Instruction ........................................................... 8
3.1 Before Installation ............................................................ 8
3.2 Grounding and Safety Requirement .................................. 9
3.3 Unpack the charger ........................................................ 11
3.4 Recommended Tools for Installation and Inspection........ 13
3.5 Installation Procedure .................................................... 14
3.6 Installation Inspection & Commissioning ........................ 19
4. NetworkSetting ................................................................... 22
4.1 Wi-Fi NetworkSetting .................................................... 22
4.2 3G/4G Setting ................................................................ 24
4.3 Time setting .................................................................. 26
5. Operation Process ................................................................ 28
5.1 Operating Sequence ....................................................... 28
5.2 Operating Procedure ...................................................... 28
5.3 Troubleshooting ............................................................ 33
5.4 StatusCodes ................................................................. 33
6. Maintenance ........................................................................ 49
6.1 General Maintenance...................................................... 49
6.2 Replacement Kitsand Accessories ................................. 51
7. Limited Product Warranty...................................................... 52
Appendix- Packagelist............................................................. 54
semaconnect.com
Introductions
The Wall Mount DC Fast Charger is the top choice to power battery electric vehicles
(BEV) and plug-in electric vehicles (PHEV). It is designed for quick charging in both
public and private locations, such as retail and commercial parking spaces, fleet
charging stations, highway service areas, workplace, residence, etc.
The Wall Mount DC Fast Charger has the advantage of easy installation. The
wall-mounted design and pluggable power modules realize flexible and cost-effec -
tive installation for different types of locations. The DC Wall-Mounted charger also
has network communication capability. It is able to connect with remote network
systems and provide drivers of electric cars real-time information, such as the
location of charging stations, charging progress and billing information. The Wall
Mount DC Fast Charger has a clear user interface with function buttons, safety cer -
tifications and an excellent waterproof and dust proof design to provide the best
choice for outdoor environments.
Features
• Wall-Mounted design and pluggable power modules make installation easy and
flexible.
• Offers customers the convenience of start/stop charging control from an autho -
rized RFID smart card or mobile APP.
• Built on latest industry standards for DC charging.
• Carries an outdoor rating capable of withstanding solid and liquid intrusions in
outdoor settings making the unit more stable and highly reliable.
• Provides a high-contrast, screen interface with multi-function buttons.
Applications
• Public and private parking areas
• Community parking areas
• Parking areas of hotels, supermarkets and shopping malls
• Workplace parking areas
• Charging stations
• Highway rest areas
1semaconnect.com
1. Basic User Interface
Antenna
Indication Light
7" Information Screen
Right Button
Left Button
RFID Card Reader
• Charging Status
• Alarm information
• User Authorization
Key Switch (Power On/Off)
Emergency Stop
USB Port
RJ45 Port
Charging Cable Outlet
Charging Cable Outlet
AC Cable Inlet
Main unit :
Notice: According to EN-17186 requirement, this
document lays down harmonized identifiers for pow -
er supply for electric road vehicles. The requirements
in this standard are to complement the informational
needs of users regarding the compatibility between
the EV charging stations, the cable assemblies and
the vehicles that are placed on the market. The
identifier is intended to be visualized at EV charging
stations, on vehicles, on cable assemblies, in EV
dealerships and in consumer manuals as described.
2semaconnect.com
3
Model Name DWWx301 Series
AC
INPUT
Voltage Rating 3Φ480 Vac (+10%, -15%).
Input current 40A
Electrical Distribution 3P+ N +PE (Wye Configuration)
Power Grid System TN / TT
Frequency 50/60Hz
Max. Input Power 33 kVA
Power factor > 0.99
Efficiency > 94%
DC
OUTPUT
Output voltage range CHAdeMO: 150 ~ 500 Vdc
CCS1: 150 ~ 950 Vdc
Max. output current CHAdeMO & CCS1: 500Vdc@60A
CCS1: [email protected]
Max. output power 30kW
Voltage accuracy +/- 2%
Current accuracy +/- 2%
User Interface
Display 7-inch LCD
Button
Right Button : Select charging
connector. (*Not applicable to this
model)
Left Button : Home / Stop charge
User Authorization
RFID: support ISO 14443A/B, ISO
15693, FeliCa Lite-S (RCS966)
OCPP, 2D barcode, APP, Mobile
Payment
Backend support OCPP 1.6JSON
Display information *Charging process and status
*Status codes
Electrical Isolation Isolation between input and output
Standby Power < 100W
semaconnect.com
4
Communication External Ethernet/4G/Wi-Fi
Internal CAN Bus / RS485
Input Protection OVP, OPP, UVP, SPD
Output Protection SCP,OCP, OVP, LVP, OTP, IMD
Internal Protection OTP, AC contactor detection, DC contactor detection,
Fuse detection
Load Management Via OCPP 1.6JSON
Operation
conditions
Operation Temperature -30 °C to 50°C
Storage Temperature -40 °C to 85°C
Relative Humidity 5%~95% RH, non-condensing
Altitude 2000 M
Regulations
Safety UL2202, UL2231-1/-2
EMI/EMC FCC Part 15B
Charging Interface
CHAdeMO : Ver 1.2
CCS1 : DIN70121 (ISO15118 by
2021/Q4)
Mechanical
Specifications
Dimensions (WxDxH mm) 610 x 230 x 690
Weight (typ.) Dual Guns：88kg
Single Gun：80kg
DC Charging Connector Refter to Chapter 2.2 Table
Charging Cable Length <5M, Optional other length
Charging Cable Number 2
Input cable and connection Not included
Cooling Forced Air
Ingression Protection IP55
Anti-vandalism IK10 (does not include LCD & RFID
cover)
semaconnect.com
5
2.2 LED Indication and Operation Status
Status LED Left Indicator Right Indicator
Standby Green Green
Fault Red Red
Charging Blue Blue
2.2 DW30 Version Description
The DW30 seriers are available in different versions depending on the charging
connectors, below table shows the available combinations, the coresponding posi -
tion of charging connectors are indicated from left to right in the view of front char -
ger.
Version CHAdeMO CCS1
DWWx301 J0U XX
DWWx301 J00 X-
DWWx301 U00 -X
0 : none
1 : IEC 62196-2 Type 1/SAE J1772 Plug
2 : IEC 62196-2 Type 1/SAE J1772 Socket
3 : IEC 62196-2 Type 2 Plug
4 : IEC 62196-2 Type 2 Socket
5 : GB/T AC Plug
6 : GB/T AC Socket
7：CCS2 AC Plug
J : CHAdeMO
U : Natural cooling CCS1 combo
V : Liquid cooling CCS1 combo
E : Natural cooling CCS2 combo
F : Liquid cooling CCS2 combo
G : GBT DC
semaconnect.com
6
2.3 Dimmensions
MainSize ofCharger:
610 230
690
(Unit: mm)
semaconnect.com
7
Wall-Mounted Bracket:
2.4 Direction of cooling Airflow
Air OutAir In
580
97
542
510
610
317
345
semaconnect.com
8
• Read all the instructions before using and installing this product.
• Do not use this product if power cable or charging cable have any damage.
• Do not use this product if the enclosure or charging connector are broken or
open or if there is damage.
• Do not put any tool, material, finger or other body part into the charging connec -
tor or EV connector.
•
•
• Power feed must be 3 Phase Wye configuration with TN(-S)/TT grounding sys -
tems.
• In the installation of TN(-S) system: the neutral (N) and the PE of the power dis -
tribution are directly connected to the earth. The PE of the charger equipment is
directly connected to the PE of power distribution and separate conductor for PE
and neutral (N).
• In the installation of TT system: the neutral (N) and the PE of the power distribu -
tion are directly connected to the earth. The PE of the charger equipment is iso -
lated to the PE of power distribution to the earth.
• The capacity of power supply should be higher than 33.0kVA in order to function
correctly.
• The product should be installed in free air area and keep at least 30cm clearance
distance to all air vent of the product.
• Need sufficient space for product installation and maintenance, please keep not
less than 60cm clearance distance from all around the product.
3. Installation Instruction
3.1 Before Installation
Warning: The product should be installed only by a licensed contractor
and/or licensed technician in accordance with all building codes, elec -
trical codes and safety standards.
Warning: The product should be inspected by a qualified installer prior
to initial use. Under no circumstances will compliance with the infor -
mation in this manual relieve user of his /her responsibilities to comply
with all applicable codes and safety standards.
semaconnect.com
Tabla de contenidos
Otros manuales de Cargador de baterías de B-Link
B-Link
B-Link DS Series Manual
B-Link
B-Link MQ 200 Manual de usuario
B-Link
B-Link Basic Charger-32A Manual de usuario
B-Link
B-Link TP-EVPD-30kW Manual de usuario
B-Link
B-Link bluecorner PQ 150 Manual de usuario
B-Link
B-Link DS Series Manual
B-Link
B-Link DS Series Manual
B-Link
B-Link HQ 200 Manual de usuario
B-Link
B-Link WE-30C Manual de usuario
B-Link
B-Link IQ 200 Manual de usuario
