Aztech WR600NSI Manual de usuario
WL580E
DUAL BAND WALL PLUGGED
300Mbps WIRELESS REPEATER
New Text
WR600NSI
User Manual
Page 2
of 3
© Copyright 2013 All rights reserved.
No part of this document may be reproduced, republished, or retransmitted in any form or
by any means whatsoever, whether electronically or mechanically, including, but not limited
to, by way of photocopying, recording, information recording, or through retrieval systems
without the express written permission. We reserve the right to revise this document at any
time without the obligation to notify any person and/or entity. All other company or product
names mentioned are used for identification purposes only and may be trademarks of their
respective owners.
LIMITATION OF LIABILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER
AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM
ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE
OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR
DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL,
PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF
BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD
PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES,
INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR
SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND,
WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE
RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER.
BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABLITY FOR
DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE
SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE
PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.
User Manual
Page 3
of 3
Contents
About the Router ......................................................................................................... 4
Minimum System Requirements..................................................................
Package Contents .......................................................................................
Device Design ............................................................................................... 6
SMART LED Indicator .................................................................................... 8
The Web User Interface ............................................................................................... 9
Web User Interface Menu ......................................................................... 12
Setup ............................................................................................................. 14
Wireless ......................................................................................................... 16
System Settings ............................................................................................ 22
Device Status .............................................................................................. 28
WPS ............................................................................................................... 29
Setup the Device ....................................................................................................... 30
User Manual
Page 4
of 3
About the Router
Aztech WL 80E is a dual band Wall-plugged 300Mbps Wireless Repeater,
which supports wireless 802.11b/g/n, and one 10/100 Base-T Ethernet port.
Repeat and Extend the WiFi Network
WL 80E supports robust 802.11n technology with up to 300Mbps data transfer
rate. The Repeater can take an existing 802.11n wireless signal, repeat and
extend it to a longer range where it is too far away for the router or
access point to reach. It eliminates the cable wires while providing the
same reliable network connection. It can repeat and extend the wireless
signal from virtually any 802.11n wireless router or access point that is
launched on the market. It is backwards compatible with the
802.11b/g router or access point.
Make Wired Network WiFi Ready
The Repeater is equipped with 1 x 10/100M Auto MDI/MDIX LAN port that can
be used to connect to an existing wired network to serve as a wireless
interface. It can also be used to configure the Repeater via its web-based
GUI, or upgrade the firmware.
MIMO Technology
The device is designed with MIMO technology, which successfully reduces
areas with weak wireless network coverage within a home or in the building.
dvanced Security
WL 80E features with 64/128-bit WEP encryption and WIFI Protected Access
(WPA), WPA2 to ensure the network security and prevent unauthorized
access to you network.
Portable without the Need of External Power Supply
The device is easy to setup. It is portable with no need of any external power
adaptor. It comes with the embedded power supply and power plug, so that
users can just plug the device into a power socket.
User Manual
Page
of 3
Minimum System Requirements
Your computer must meet the following minimum requirements.
Any operating system can be used
Web Browser
233MHz processor (or higher)
Ethernet network adapter
Or Wireless network adapter
Package Contents
Package contents are listed below. For any missing items, please contact
your dealer immediately. Product contents vary for different models.
WL 80E
Ethernet cable
Easy Start Guide
Resource CD
Note: You may also download the Easy Start Guide, and the User Manual
by visiting this link: www.aztech.com/support/
User Manual
Page 6
of 3
Device Design
Front Panel
LABEL STATE DESCRIPTION
SMART LED Indicator
3 BARS Connected 9 % and above
(Excellent)
2 BARS Connected -94% (Recommended)
1 BAR Connected 10- 4% (Weak)
LABEL STATE DESCRIPTION
2.4GHz
OFF No Wireless Device is
connected.
Blinking
A Wireless Device is
connected and is
actively transmitting /
receiving data
.0GHz
OFF No Wireless Device is
connected.
Blinking
A Wireless Device is
connected and is
actively transmitting /
receiving data
Power LED ON WL 80E is Plugged to a
working Power Outlet
User Manual
Page 7
of 3
Top Panel
Bottom Panel
LABEL DESCRIPTION
WPS Button
Press this button for 2 seconds to connect
theWL 80E to any WPS capable devices
(Wireless Device)
Press this button for seconds to connect the
WL 80E to any WPS capable devices (Wireless
Router)
LABEL DESCRIPTION
RESET
Press the Reset button for seconds to
restore the device to default factory
settings
ETHERNET
PORT
Connect to computers/Ethernet devices
Ethernet Port
Reset Button
User Manual
Page 8
of 3
SMART LED Indicator
Your WL 80E is equipped with a SMART LED indicator which determines the
signal strength from your wireless router as seen below:
NOTE: Wireless reception and throughput may vary according to the
number of Wireless Devices that are in use, and at the same time,
other nearby wireless devices, structure types, building materials, and
other interferences present.
User Manual
Page 9
of 3
The Web User Interface
The Web User Interface of your WL 80E allows you to configure the various
features of your WL 80E. This will serve as your main tool in monitoring and
configuring all of your WL 80E’s main features.
Accessing the Web User Interface
NOTE: To avoid any conflicts in accessing the Web User Interface, it is strongly
advised to do the following:
•Simply access the Web User interface through an Ethernet connection.
This is achieved by connecting your Computer and your WL 80E
through an Ethernet cable.
•If present, kindly turn off the wireless adapter of your computer. You
may enable the wireless adapter after completing the setup. This is to
avoid IP address conflict which might block you from accessing the
Web user interface.
•Remove temporary Internet files.
To access the Web User Interface through an Ethernet connection:
1. Connect your computer to the WL 80E device using an Ethernet cable.
NOTE: before proceeding to step 2, please check the SMART LED of the
device; the LED should be in GREEN WEAK status and BLINKING.
2. Launch any web browser. You would automatically be redirected to
your WL 80E’s web user interface.
3. If in any case it does not, kindly type 10.0.10.254 on the address bar
and press Enter. You will then be redirected to the Home page of your
WL 80E’s web user interface.
4. Upon redirecting, a window showing the wireless networks within range
would appear. You may close this mini window or choose to connect
to your preferred wireless network immediately.
User Manual
Page 10
of 3
If you wish to connect to a wireless network immediately you may do the
following steps:
1. Click the connect button that corresponds to the network you want to
connect to.
2. Enter the correct Wireless Password of the preferred network then click
the Apply button.
Tabla de contenidos
Otros manuales de Reloj de repetición de Aztech
Aztech
Aztech WL559E Instrucciones de uso
Aztech
Aztech WL556E Guía
Aztech
Aztech WL590E Instrucciones de uso
Aztech
Aztech WL556E Instrucciones de uso
Aztech
Aztech WR300 Manual de usuario
Aztech
Aztech WL580E Instrucciones de uso
Aztech
Aztech WL580E Manual de usuario
Aztech
Aztech WL556E Manual de usuario
Aztech
Aztech WL559E Guía de instalación
Aztech
Aztech WL580E Instrucciones de uso
