Aztech 56K External Modem Hoja de información del producto
Easy Start
Easy Start Page 1 of 16
56K USB Modem
Easy Start
Version 2.0
Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage.
This product is for use only in UL Listed computers.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
Easy Start
Easy Start Page 2 of 16
Table of Contents
Preliminary Pages Page
Table of Contents...................................................................................................................2
Chapter 1 - About this Easy Start.........................................................................................6
1.1 Minimum System Requirements......................................................6
1.2 Package.............................................................................................6
Chapter 2 - Connecting The Modem To Your Computer....................................................7
Chapter 3 - Installing Your Modem Driver .........................................................................8
3.1 Installing your Modem Driver for Windows 98 Second Edition.....8
3.2 Installing your Modem Driver for Windows 2000.........................10
3.3 Installing your Modem Driver for Windows ME...........................12
3.4 Installing your Modem Driver for Windows XP Service Pack 1...14
3.5 Installing your Modem Driver for Windows XP Service Pack 2...15
3.6 Verifying Your Modem..................................................................15
Chapter 4 - Uninstalling Your Modem Driver...................................................................16
Easy Start
Easy Start Page 3 of 16
Warning & Safety Messages…
WARNING!
Before installing the Modem card ensure the PC is switched OFF and the mains
cord removed. If servicing the Modem card ensure the PC is switched OFF, the
mains cord unplugged and the Telecommunications Line cord is disconnected
from the Modem Card.
EUROPEAN NETWORK COMPATIBILITY DECLARATION
This product is designed to interwork with the Public Switched Telecommunication Networks in
UK, Ireland, Netherlands, Sweden, Denmark , Finland, Switzerland, Luxembourg, Belgium,
France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.
The equipment may have interworking difficulties in PSTN networks in other countries. Please
contact your equipment supplier if it is desired to use the equipment on another network.
Electrical Safety
Before installing this equipment you must ensure that the power drawn by this card, together
with the host and any auxiliary cards drawing power from the host, is within the rating of the host
power supply.
The equipment must be installed such that with the exception of the connections to the host,
clearance and creepage distances shown in the table below are maintained between the card and
any other assemblies that use or generate a voltage shown in the table.
The larger distance shown in brackets applies where the local environment within the host is
subject to conductive pollution or dry non-conductive pollution which could become conductive
due to condensation. Failure to maintain these minimum distances would invalidate the approval.
‘The analogue telecommunications interface is intended to be connected to telecommunication
network voltage (TNV) circuits which may carry dangerous voltages. The telephone cord must
remain disconnected from the telecommunications system until the card has been installed within
a host which provides the necessary protection of the operator.
Safety level of the various connectors:
• Telephone Line Connector = TNV3
• PCI connector = SELV
These indications are classified as per safety standards EN60950/A4:
• TNV3: Telecommunications Network
• Voltage
• SELV: Safety Extra Low Voltage
Easy Start
Easy Start Page 4 of 16
Pan European Approval Regulatory Note
The equipment has been approved under CTR21. For such product, the following statement is
required: “This equipment has been approved in accordance with Council Decision 98/482/EC
for Pan European single terminal connection to the Public Switched Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in different countries the
approval does not, of itself, give an unconditional assurance of successful operation on every
PSTN network termination point. In the event of problems, you should contact your equipment
supplier in the first instance”
Network Compatibility Declaration
This product is designed to interwork with the Public Switched Telecommunication Networks in
UK, Ireland, Netherlands, Sweden, Denmark , Finland, Switzerland, Luxembourg, Belgium,
France, Germany, Spain, Portugal, Iceland, Greece, Italy, Norway and Austria.
New Zealand Telecom Warnings
General
“The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has
accepted that the item complies with minimum conditions for connection to its network. It
indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.
Above all, it provides no assurance that any item will work correctly in all respects with another
item of Telepermitted equipment of a different make or model, nor does it imply that any product
is compatible with all of Telecom’s network services.”
“This equipment does not fully meet Telecom’s impedance requirements. Performance
limitations may occur when used in conjunction with some parts of the network. Telecom will
accept no responsibility should difficulties arise in such circumstances.”
“This equipment shall not be set up to make automatic calls to the Telecom ‘111’ Emergency
Service.”
“If a charge for local calls is unacceptable, the ‘Dial’ button should NOT be used for local calls.
Only the 7-digits of the local number should be dialed from your telephone. DO NOT dial the
area code digit or the ‘0’ prefix.”
This equipment may not provide for the effective hand-over of a call to another device connected
to the same line.
Important Notice
Under power failure conditions, this telephone may not operate. Please ensure that a separate
telephone, not dependent on local power, is available for emergency use.”
“Some parameters required for compliance with Telecom’s Telepermit requirements are
dependent on the equipment (PC) associated with this device. The associated equipment shall be
set to operate within the following limits for compliance with Telecom’s Specification:
Easy Start
Easy Start Page 5 of 16
1. There shall be no more than 10 call attempts to the same number within any 30 minute period
for any single manual call initiation.
2. The equipment shall go on-hook for a period of not less than 30 seconds between the end of
one attempt and the beginning of the next attempt.
3. Where automatic calls are made to different numbers, the equipment shall go on-line for a
period of not less than 5 seconds between the end of one attempt and the beginning of the
next attempt.
4. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of
receipt of ringing.”
“All persons using this device for recording telephone conversations shall comply with New
Zealand law. This requires that at least one party to the conversation is to be aware that it is
being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied
with in respect to the nature of the personal information collected, the purpose for its collection,
how it is used and what is disclosed to any other party.”
Note…
Keep the modem away from fluid, direct sunlight and excessive heat. During
times of lightning strike / thunderstorm, do not use the modem.
Easy Start
Easy Start Page 6 of 16
Chapter 1 - About this Easy Start
This booklet contains information on setting up your 56K USB Modem. It touches on the key
installation procedures and allows you to setup your modem within minutes!
1.1 Minimum System Requirements
• Pentium®MMX 233MHz
• A free USB Port
• A CD-ROM Drive
• 32MB RAM for Windows® 98 Second Edition
64MB RAM for Windows® Me
128MB RAM for Windows® 2000 / Windows® XP
• Host Operating Systems support for USB:
• Windows® 98 Second Edition / Windows® 2000 / Windows® Me / Windows®
XP
1.2 Package
For any missing items, please contact your dealer immediately.
Note…
The actual cables that come with your package may differ in appearance from
country to country.
56K USB Modem Installation CD Telephone Extension Cable RJ-11
Easy Start Manual
The optional telephone extension cable used for this modem is a UL Listed Communication
Circuit Accessory, minimum 26AWG.
Easy Start
Easy Start Page 7 of 16
Chapter 2 - Connecting The Modem To Your Computer
The 56K USB Modem is a 'plug-n-play' device. You may connect your modem to your computer
anytime without having to power down your system. Connect as follow and your Windows will
immediately detect the new hardware and prompt for its driver.
1. Connect one end of the telephone extension cable to the LINE jack on Modem and the
other end to your Telephone Wall Socket.
2. Connect the USB cable of the Modem to the USB port on your computer.
This completes the modem connections. Please proceed to Chapter 3.
USB Port
Rear of PC
Telephone
Extension
Cable
Telephone
Wall
Socket
56K USB Modem
Easy Start
Easy Start Page 8 of 16
Chapter 3 - Installing Your Modem Driver
3.1 Installing your Modem Driver for Windows 98 Second Edition
a. If your modem is connected as illustrated in Chapter 2, you will be prompted for the
modem driver.
Figure 1 : Prompted for Driver
b. Place the
Installation CD into your CD-ROM Drive and click Next. See Fig 1.
c. Click the option Search for the best driver for your device. (Recommended) and
Click Next. See Fig 2.
Figure 2 : Search for New Drivers
d. Click Specify a location. Click Browse. Navigate to the '\Win98SE' folder on the
Installation CD. Click OK. Click Next to proceed. (The screen shot uses the CD-
ROM drive letter D as an example. You should see the letter of your CD-ROM
drive.) See Fig 3.
Easy Start
Easy Start Page 9 of 16
Figure 3 : Specifying Location
e. Windows will prompt that it has located the driver. Click Next to proceed. See Fig 4.
Figure 4 : New Driver Found
(Depending on your system configurations you may be prompted for your Windows
CD-ROM. Replace the installation CD with your Windows CD-ROM and click
OK. At the copying files dialog box, enter the path of your windows CD-ROM e.g.
D:\Win98 and click OK.)
f. Click Finish to complete the driver installation. See Fig 5.
Figure 5 : Installation Completed
Easy Start
Easy Start Page 10 of 16
3.2 Installing your Modem Driver for Windows 2000
g. If your modem is connected as illustrated in Chapter 2 you will be prompted for the
modem driver.
h. Place the
Installation CD into your CD-ROM Drive and click Next. See Fig 6.
Figure 6 : Prompted for Driver
i. Click Search for a suitable driver for my device. (recommended) and click Next. See
Fig 7.
Figure 7 : Search for New Drivers
Otros manuales para 56K External Modem
2
Tabla de contenidos
Otros manuales de Módem de Aztech
Aztech
Aztech 100U Hoja de información del producto
Aztech
Aztech DSL305E Instrucciones de uso
Aztech
Aztech DSL500U Hoja de información del producto
Aztech
Aztech 100U Hoja de información del producto
Aztech
Aztech MDP3880SP-U Manual de usuario
Aztech
Aztech DSL 1015EN L Guía
Aztech
Aztech HomePlug AV with Simple Connect Button Manual de usuario
Aztech
Aztech 206U Manual de usuario
Aztech
Aztech 56K PCI Modem Manual de usuario
Aztech
Aztech DSL705EU Manual de usuario
Aztech
Aztech PCI 56K Hoja de información del producto
Aztech
Aztech DSL700P Manual de usuario
Aztech
Aztech MDP3858A Series Manual de usuario
Aztech
Aztech 56K External Modem Hoja de información del producto
Aztech
Aztech MDP3858U Series Manual de usuario
Aztech
Aztech 100U Hoja de información del producto
Aztech
Aztech DSL600E(C) Manual de usuario
Aztech
Aztech DSL Turbo 900 Package Manual de usuario
Aztech
Aztech DSL Turbo 900 Package Manual de usuario
Aztech
Aztech DSL500U Instrucciones de uso
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario