Axxess AX-LCD Manual de usuario
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-LCD
INSTALLATION INSTRUCTIONS
INTERFACE COMPONENTS TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape
• Connectors (example: butt-connectors, bell
caps, etc.)
TABLE OF CONTENTS
Connections to be made .......................................3
Using the LCD screen .........................................4-5
• Retains the personalization menu that
is lost when removing the factory radio
(select applications)
• Retains and controls the factory satellite
radio while using an Axxess interface
(select applications)
• Adjustable 256 color LCD screen
• Wire channel for flexible mounting
• Micro “B” USB updatable
• LCD Screen
• DIN harness with leads
Axxess LCD screen 2000-up
INTERFACE FEATURES
APPLICATIONS
(For retaining and controlling the factory satellite radio while using an Axxess Interface)
APPLICATIONS
(For retaining the personalization menu that is lost when removing the factory radio)
BUICK
Century 2004-2005
LaCrosse 2005-2009
BUICK
Rainier 2004-2007
Rendezvous 2002-2007
BUICK
Terraza 2005-2008
CADILLAC
Escalade/ESV/EXT 2003-2006
Applications continued on the next page
TOYOTA
Camry 2012-2014
FIAT
Fiat 500 L 2014-2016
MAZDA
Mazda6 2014-2015
2
APPLICATIONS (CONT)
CHEVROLET
Avalanche 2003-2006
Cavalier 2000-2005
Cobalt 2007-2010
Corvette 2005-2013
Express 2003-2007
HHR 2006-2011
Impala 2000-2005
Kodiak 2003-2009
Malibu 2001-2003
Malibu 2008-2012
Malibu (classic) 2004-2005
Monte Carlo 2000-2005
Silverado 2003-2006
Silverado (classic) 2007
SSR 2003-2006
Suburban 2003-2006
Tahoe 2003-2006
Trailblazer 2002-2009
Uplander 2005-2008
FORD
Edge 2007-2014
Escape 2008-2012
Expedition 2007-2014
Explorer 2008-2015
Explorer Sport Trac 2008-2010
F-150 2009-2012
F-150 (with monochrome screen) 2013-2014
F-250/350/450/550 2011-2012
F-250/350/450/550
(with monochrome screen) 2013-2016
Fiesta (without MyFord Touch) 2011-up
Five Hundred 2005-2007
Focus 2008-2011
Focus (without MyFord Touch) 2012-2014
Fusion 2008-2012
Taurus 2008-2012
Taurus X 2008-2009
GMC
Envoy 2002-2009
Savana 2003-2007
Sierra 2003-2006
Sierra (classic) 2007
Yukon / Yukon XL 2003-2006
HARLEY DAVIDSON
Electraglide 2014-up
Limited 2014-up
Road Glide 2015-up
Streetglide 2014-up
HUMMER
H2 2003-2007
H3/H3t 2006-2010
ISUZU
Ascender 2003-2008
H-Series 2005-2009
I-Series 2006-2008
LINCOLN
MKX 2008-2010
MKZ 2008-2009
Navigator 2007-2014
MERCURY
Mariner 2008-2011
Milan 2008-2011
Mountaineer 2008-2010
Sable 2008-2009
OLDSMOBILE
Alero 2001-2004
Bravada 2002-2004
Intrigue 2002
Silhouette 2000-2004
PONTIAC
Aztec 2001-2005
G5 2007-2009
G6 2009-2010
Grand Am 2001-2005
Grand Prix 2004-2008
Montana SV6 2005-2006
Solstice 2006-2009
Sunfire 2000-2005
SAAB
9-7x 2005-2009
SATURN
Aura 2006-2009
Relay 2005-2009
Sky 2007-2009
(For retaining and controlling the factory satellite radio while using an Axxess Interface)
3
CONNECTIONS TO BE MADE
The AX-LCD allows the retention of the vehicles personalization menu that is lost after removing the factory radio.
The DIN harness with leads is only for the following vehicles:
• Connect the Black wire to ground.
• Connect the Red wire to accessory power.
(this is the wire view of the factory harness)
For the Toyota Camry 2012-2014
The following connections are to be made to
the factory 28-pin connector behind the radio:
• Pink of the AX-LCD to pin-9
• Blue/Pink of the AX-LCD to pin-10
For the Mazda 6 2014-2015
The following connections are to be made to
the factory 24-pin connector behind the radio:
• Pink of the AX-LCD to pin-1L
• Blue/Pink of the AX-LCD to pin-1J
(this is the pin view of the factory harness)
For the Fiat 500L 2014-up,
Ram 1500/2500/3500 (without 8.4” touchscreen radio),
Chassis Cab 3500/4500/5500 (without 8.4”
touchscreen radio) 2013-up,
The following connections are to be made to the factory 52-pin
connector behind the radio:
31 40 49
52
44
41
10
1
(this is the pin view of the factory harness)
• Blue/Pink of the AX-LCD to pin-12
• Pink of the AX-LCD to pin-2
(For retaining the personalization menu that is lost when removing the factory radio)
(For retaining and controlling the factory satellite radio while using an Axxess Interface)
• Connect the DIN cable from the LCD screen into the DIN connector on the Axxess interface.
CONNECTIONS TO BE MADE
4
USING THE LCD SCREEN
(For retaining the personalization menu that is lost when removing the factory radio)
Note:
The vehicle menu will vary from car to car. For more information, please see the owner’s manual that came with the vehicle.
Arrow Up - Toggles “up” through menu options
Arrow Down - Toggles “down” through menu options
Return/ESC - Return to the previous menu
Enter - Enter current menu option
• Press and hold the “Return/ESC” button on the LCD screen for 5 seconds until “Select Interface” comes up.
• Select “Connection Type”, and then press “Enter”.
• Scroll up or down to “Direct Connect”, and then press “Enter”.
• Once done, press the “Return/ESC” button two times to get back to the main menu.
Main menu options:
• Red adjusts the red backlighting of the LCD (ranges from 1 to 32).
• Blue adjusts the blue backlighting of the LCD (ranges from 1 to 32).
• Green adjusts the green backlighting of the LCD (ranges from 1 to 32).
• Contrast adjusts the contrast of the LCD (ranges from 1 to 100).
• Reset puts the color back to the default settings.
5
USING THE LCD SCREEN
(For retaining and controlling the factory satellite radio while using an Axxess Interface)
Main menu options:
• Red adjusts the red backlighting of the LCD (ranges from 1 to 32).
• Blue adjusts the blue backlighting of the LCD (ranges from 1 to 32).
• Green adjusts the green backlighting of the LCD (ranges from 1 to 32).
• Contrast adjusts the contrast of the LCD (ranges from 1 to 100).
• Reset puts the color back to the default settings.
Note:
The vehicle menu will vary from car to car. For more information, please see the owner’s manual that came with the vehicle.
Arrow Up - Channel Up
Arrow Down - Channel Down
Return/ESC - Selects current item on the screen
Enter - Exits to the previous screen
• Press and hold the “Return/ESC” button on the LCD screen for 5 seconds until “Select Interface” comes up.
• Select “Connection Type”, and then press “Enter”.
• Select “Gateway”, and then press “Enter”.
• Once done, press the “Return/ESC” button two times to get back to the main menu.
On our website you can discover more about car stereo and video installation parts.
Otros manuales para AX-LCD
2
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Axxess
Axxess
Axxess AXGMLN-03 Manual de usuario
Axxess
Axxess AXDSPL-FD3 Manual de usuario
Axxess
Axxess AXDSPX-HK1 Manual de usuario
Axxess
Axxess AXSSO-GM Manual de usuario
Axxess
Axxess AX-DSPX-HD1-WR Manual de usuario
Axxess
Axxess AXDIS-TY2 Manual de usuario
Axxess
Axxess GMOS-13 Manual de usuario
Axxess
Axxess ASWC-1 Manual de usuario
Axxess
Axxess AXDSPX-VW2 Manual de usuario
Axxess
Axxess AXDIS-GMLN29 Manual de usuario
Axxess
Axxess ASWC-1 Manual de usuario
Axxess
Axxess AX-MLINK-HD Manual de usuario
Axxess
Axxess AXDSPX-MZ1 Manual de usuario
Axxess
Axxess AXGMLN-08 Manual de usuario
Axxess
Axxess AX-GMCL2-SWC Manual de usuario
Axxess
Axxess XIA-USB Manual de usuario
Axxess
Axxess AXDSPL-HK3 Manual de usuario
Axxess
Axxess AXDSPX-TY1 Manual de usuario
Axxess
Axxess AXDIS-GMLN11 Manual de usuario
Axxess
Axxess AXPIO-CAM1 Manual de usuario
