Axis Axis 216FD Manual de usuario
ENGLISH FRANCAIS DEUTSCH ESPAÑOL
ITALIANO
1
AXIS 216FD Pendant Kit
Installation Guide
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
ENGLISH
3
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
This installation guide provides instructions for installing the Pendant Kit for the AXIS
216FD/216FD-V/216MFD/216MFD-V Fixed Dome Network Camera, in this document
referred to as AXIS 216FD. Please read through the entire guide before proceeding with the
installation.
For instructions on how to install the camera, please refer to the AXIS 216FD/216FD-V/
216MFD/216MFD-V Installation Guide, available from www.axis.com or the AXIS Network
Video CD.
Before you begin
Before you begin, make sure you have the following components:
• Pendant adapter kit
Package contents:
• (1) Cast aluminum pendant adapter
• (1) Pendant adapter gasket
• (1) 1.5 inch to 22mm adapter (not available in all pendant kits)
• (2) M4 x 16 Pozidriv screws
• (1) M4 x 20 Pozidriv screw
Additional components (not included):
• AXIS 216FD/216FD-V/216MFD/216MFD-V Network Camera
Package contents:
• (2) Pozidriv screws (not used for pendant adapter)
• (2) Tamper-proof screws
• (1) Screwdriver for tamper-proof screws
• Wall mount bracket
• Suitable screws/plugs for the wall mount bracket
• Pozidriv screwdriver (to attach the camera unit to the pendant adapter)
Wall mount
(not included)
pendant
adapter
AXIS 216FD
(not included)
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
4
Install the wall mount bracket
Route the power and network cables (including I/O and audio cables if used) through the
wall mount bracket and allow to extend as shown. Install the wall mount bracket securely,
in the desired position.
Cables
Wall mount bracket (1.5 inch pipe)
1.5 inch pipe
Cables
1.5 inch-22 mm adapter
Wall mount bracket (1.5 inch to 22 mm adapter)
22 mm pipe
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
ENGLISH
5
Attach the pendant adapter
1. Attach the pendant adapter to the wall mount
bracket.
2. Lock the pendant adapter in the correct position on
the wall mount bracket, using the supplied M4x20
screw in the locking screw hole.
Attach the camera unit
Note:
Before installing the camera, make a note of the serial number (S/N) which is located on the
product label on the base of the camera unit. The serial number is used in the installation.
Attach the camera unit to the pendant adapter using the supplied M4x16 screws.
M4x20 screw
Locking screw hole
pendant
adapter
Wall mount bracket
(supplied)
Recommended
locking screw position
M4x16 screws (supplied)
pendant adapter
Camera unit
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
6
Install the camera
Refer to the AXIS 216FD Installation Guide to:
• connect the cables to the camera unit
• set the IP address
• focus the camera
• make the necessary image adjustments
Note:
The installation guide is available from the Axis web site at www.axis.com or from the AXIS
Network Video CD supplied with the camera.
Complete the installation
1. Stretch the rubber gasket round the edge of the dome casing. Align the Axis logotype
on the gasket with the printed logotype on the dome casing.
2. Attach the dome casing and gasket to the pendant adapter.
3. Secure the dome casing using the supplied tamper-proof screws.
Note:
The gasket is not designed to carry the weight of the dome casing, be sure to hold the dome
casing until it is securely held in place by the tamper-proof screws.
AXIS 216FD
dome casing
Rubber
Make sure that the gasket is
properly fitted with ‘MOUNT
THIS SIDE UP’ visible when
placed on the dome casing.
gasket
AXIS 216FD/216FD-V/216MFD/216MFD-V Pendant Kit
ENGLISH
7
The installation is now complete.
For more information on the
functionality of the AXIS 216FD,
please refer to the user’s manual or the
online help files.
The AXIS 216FD User’s Manual is
available from the Axis web site at
www.axis.com or from the AXIS
Network Video CD supplied with the
camera.
Tamper-proof
screw
Pendant adapter
Camera unit
Gasket
Dome
casing
Tamper-proof
screw
Axis logotype
on this side
AXIS 216FD/216FD-V/216MFD/216MFD-V Kit suspendu 9
FRANCAIS
AXIS 216FD/216FD-V/216MFD/216MFD-V Kit suspendu
Ce guide d'installation vous explique comment installer le kit suspendu pour l’AXIS 216FD/
216FD-V/216MFD/216MFD-V caméra réseau à dôme fixe, appelée AXIS 216FD dans ce
document. Lisez attentivement ce guide avant de poursuivre l'installation.
Pour obtenir des instructions sur l'installation de la caméra, reportez-vous au guide
d'installation AXIS 216FD/216FD-V/216MFD/216MFD-V , disponible sur www.axis.com ou
sur le CD du produit vidéo réseau AXIS.
Avant de commencer
Avant de commencer l'installation, vérifiez que vous possédez les composants suivants :
• Kit d'adaptateur suspendu
Contenu de l'emballage :
• (1) Adaptateur suspendu en aluminium coulé
• (1) Joint d'adaptateur suspendu
• (1) Adaptateur 1,5 pouce à 22mm (non disponible pour tous les kits pendants)
• (2) Vis à empreinte cruciforme M4 x 16
• (1) Vis à empreinte cruciforme M4 x 20
Autres composants (non inclus) :
• AXIS 216FD/216FD-V/216MFD/216MFD-V Caméra réseau
Contenu de l'emballage :
• (2) Vis à tête cruciforme (non utilisées pour l'adaptateur suspendu)
• (2) Vis inviolables
• (1) Tournevis pour vis inviolables
• Support mural
• Vis et chevilles adaptées au support mural
• Tournevis Pozidriv (pour fixer la caméra à l'adaptateur suspendu)
Support mural
(non incluse)
adaptateur
suspendu
AXIS 216FD
(non incluse)
AXIS 216FD/216FD-V/216MFD/216MFD-V Kit suspendu
10
Installation du support mural
Faites passer les câbles d'alimentation et réseau (y compris les câbles d'E/S et les câbles
audio si nécessaire) dans le support mural et laissez-les dépasser comme le montre
l'illustration. Fixez solidement le support mural dans la position souhaitée..
Câbles
Support mural (tuyau 3,81 cm)
Tuyau 3.81 cm
Câbles
Adaptateur 1,5 pouce - 22 mm
Support mural (adaptateur 1,5 pouce - 22 mm)
Tuyau 22 mm
Otros manuales para Axis 216FD
7
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
