AXIOMTEK PANEL1127-671 Manual de usuario

PANEL1127-671

All-in-One

12.1” Super Slim

PANEL PC

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. AXIOMTEK Co., Ltd. assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in

this document. AXIOMTEK makes no commitment to update or to keep current the

information contained in this manual.

AXIOMTEK reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of AXIOMTEK Co.,

Ltd.

May 2003, Version A1

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested and complies with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL1127-671 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the PANEL1127-671

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PANEL1127-671 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL1127-671 may come

with or w/o a touchscreen. Although the touchscreen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touchscreen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PANEL1127-671, make

sure it is securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

9Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity on

your body.

9When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

AXIOMTEK is a trademark of AXIOMTEK Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBASIC are trademarks of

Microsoft Corporation.

C&T is a trademark of Chips and Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

This page does not contain any information.

Table of Contents vii

Table of Contents

Chapter 1 Introduction ------------------------------- 1

1.1 General Description .......................................... 1

1.2 Specifications ................................................... 2

1.2.1 Core System for PANEL1127-671 SBC83671-based

system......................................................................2

1.2.2 I/O System................................................................2

1.2.3 Built-in Peripherals ...................................................3

1.2.4 System Specification ...............................................4

1.3 Dimensions .......................................................5

1.4 I/O Outlets ......................................................... 6

1.5 Utilities Supported ............................................ 7

Chapter 2 System Configuration------------------ 9

2.1 System Configuration ....................................... 9

2.1.1 Front View ................................................................9

2.2 Panel Mount .................................................... 10

Chapter 3 System Installation --------------------11

3.1 CPU, HDD, DRAM and Riser Card Installation 12

3.2 3 x Serial Ports................................................ 14

3.3 Parallel Port .................................................... 14

3.4 VGA ................................................................. 15

3.5 Ethernet........................................................... 15

3.6 Digital I/Os....................................................... 16

3.7 Keyboard ......................................................... 16

3.8 PS/2 Mouse...................................................... 16

3.9 System O/S and Software Installation ............ 17

Appendix A Power Supply Specifications ----19

Appendix B General Care & Maintenance-----25

viii

This page does not contain any information.

PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual

Introduction 1

C h a p t e r 1

Introduction

This chapter contains the general information and the detailed

specifications of the PANEL1127-671. Chapter 1 includes the

following sections:

General Description

System Specification

Dimensions

I/O Outlets

Utilities Supported

1.1 General Description

The PANEL1127-671 super slim industrial PANEL PC is mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is simply not integrated enough.

Ruggedly designed, the PANEL1127-671 is 100% IBM PC/AT

compatible and it integrates super I/Os, VGA, 12.1” TFT touchscreen,

Ethernet, and packs special industrial features like watchdog timer,

CMOS double backup, all in a single system. The full PC functionality

coupled with its industrial-grade construction easily tailors the system

for any embedded applications and allows the system to endure

continuous operation in any hostile industrial environments where

stability and reliability are a must. Common applications of the

PANEL1127- 671include tooling machine, POI terminal, stand-alone

KIOSK, medical instrument, mobile communication device and

banking system - to name just a few.

PANEL1127-671 is virtually the ultimate one-step solution for your

space-limited applications.

PANEL1127-671 12.1” All-in-One PANEL PC User’s Manual

Introduction

1.2 Specifications

1.2.1 Core System for PANEL 1127-671 system

with SBC83671

CPU: Intel Celeron 533MHz ~ 1.3G MHz;

Intel Pentium III 550 ~ 1.4G MHz

VIA Cyrix-III/C3 Family at 100/133MHz FSB

System Chipset: VIA VT82C694T,VT82C686B with integrated

real-time clock

BIOS: Award BIOS, Y2K compliant

2Mbit Flash ROM, DMI, Plug and Play

System Memory: One 168-pin DIMM Socket

Maximum of 512MB SDRAM

ECC/parity

L2 Cache: Integrated in CPU

Bus Clock: 66/100/133 MHz

Watchdog Timer: Generates a system reset or NMI by

jumperselectable;

software programmable Time interval ;

64 levels, 0.5~8 / 5~80 / 50~800 / 100~1600

seconds

1.2.2 I/O System

Standard I/O:

−4 x serial ports with power;

3 x RS-232, 1 x

RS-232/422/485 jumper

selectable

−1 x parallel port,

SPP/EPP/ECP

−1 x External FDD Interface

−1 x Internal HDD Interface

−1 x Keyboard Interface

−1 x PS/2 Mouse Interface

−1 x CD-ROM Interface

−2 x USB Ports

Digital I/O: Input x 4, Output x 4

Ethernet:

−Realtek 8139C PCI Bus 10/100M Base-T

−Wake-On-LAN

Tabla de contenidos

Otros manuales de Panel táctil de AXIOMTEK

AXIOMTEK

AXIOMTEK PANEL5155-807 Manual de usuario

AXIOMTEK

AXIOMTEK GOT715S-RA-M Manual de usuario

AXIOMTEK

AXIOMTEK MPC103-845 Manual de usuario

AXIOMTEK

AXIOMTEK GOT315WL-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT5840T-832 Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3126TL-830 Manual de usuario

AXIOMTEK

AXIOMTEK P1177S-871 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3217WL-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK IFO2225-873 Series Manual de usuario

AXIOMTEK

AXIOMTEK PANEL1173-841 Manual de usuario

AXIOMTEK

AXIOMTEK OPS883-H Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT315A-ELK-WCD Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3156TL-830 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3187WL-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT-812 Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3106TL-830 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3187W-832-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3100T Manual de usuario

AXIOMTEK

AXIOMTEK P1177E-500 Manual de usuario

AXIOMTEK

AXIOMTEK GOT817L-511 Manual de usuario

AXIOMTEK

AXIOMTEK GOT-5152T-830 Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-502-PCT Manual de usuario

AXIOMTEK

AXIOMTEK IFO2225-851 Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario