AXIOMTEK GOT-5152T-830 Manual de usuario

GOT-5152T-830

All-in-One

15”XGA TFT Fanless Touch Panel

Computer with Intel®AtomTM N270

Processor Onboard

User’s Manual

Disclaimers

This manual has been carefully checked and believed to

contain accurate information. Axiomtek Co., Ltd. assumes no

responsibility for any infringements of patents or any third

party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or

responsibility for the accuracy, completeness or usefulness of

any information in this document. Axiomtek does not make any

commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document

and/or product at any time without notice.

No part of this document may be reproduced, stored in a

retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of Axiomtek Co., Ltd.

December 2011, Version A2

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested in compliance with the limits for a

Class A digital device, pursuant to Part 15 of the FCC Rules. These

limits are meant to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following methods:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment to another outlet of a circuit that doesn’t

connect with the receiver.

4. Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with the

emission limits.

CAUTION：RISK OF EXPLOSION IF BATTERY IS EPLACED BY AN

INCORRECT TYPE DISPOSES OF USED BATTERIES

ACCORDING TO THE INSTRUCTIONS.

Safety Precautions

Before getting started, please read the following important

safety precautions.

1. The GOT-5152T-830 does not come equipped with an

operating system. An operating system must be loaded first

before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist strap

and place all electronic components in any static-shielded

devices. Most electronic components are sensitive to static

electrical charge.

3. Disconnect the power cord from the GOT-5152T-830 before

any installation. Be sure both the system and external devices

are turned OFF. A sudden surge of power could ruin sensitive

components that the GOT-5152T-830 must be properly

grounded.

4. The brightness of the flat panel display will be getting weaker as

a result of frequent usage. However, the operating period varies

depending on the application environment.

5. Turn OFF the system power before cleaning. Clean the system

using a cloth only. Do not spray any liquid cleaner directly onto

the screen. The GOT-5152T-830 may come with or w/o a

touchscreen. Although the touchscreen is chemical resistant, it

is recommended that you spray the liquid cleaner on a cloth first

before wiping the screen. In case your system comes without

the touchscreen, you must follow the same procedure and not

spray any cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touchscreen.

Scratches on the touchscreen may cause malfunction or

internal failure to the touchscreen.

7. The flat panel display is not susceptible to shock or vibration.

When assembling the GOT-5152T-830, make sure it is

securely installed.

8. Do not open the system’s back cover. If opening the cover for

maintenance is a must, only a trained technician is allowed to

do so. Integrated circuits on computer boards are sensitive to

static electricity. To avoid damaging chips from electrostatic

discharge, observe the following precautions:

9 Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity

on your body.

When handling boards and components, wear a wrist-

grounding strap, available from most electronic component

stores.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd. IBM, PC/AT,

PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel®and Atom™are registered trademarks of Intel

Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of

Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation.

Other brand names and trademarks are the properties and

registered brands of their respective owners.

Table of Contents

Disclaimers....................................................................................ii

Safety Approvals...........................................................................iii

Safety Precautions........................................................................iv

CHAPTER 1 INTRODUCTION................................................................ 1

1.1 General Description .................................................... 1

1.2 Specifications.............................................................. 3

1.2.1 Main CPU Board......................................................... 3

1.2.2 I/O System .................................................................. 3

1.2.3 System Specification................................................... 4

1.3 Dimensions ................................................................. 6

1.4 I/O Outlets................................................................. 10

1.5 Packing List............................................................... 11

CHAPTER 2 HARDWARE INSTALLATION ................................... 13

2.1 CF card Installation................................................... 13

2.2 Serial Ports Interface ................................................ 15

2.3 Ethernet..................................................................... 17

2.4 Mountings –Panel/Wall/Desktop/VESA ................... 18

2.4.1 Panel Mounting......................................................... 18

2.4.2 Wall-Mounting........................................................... 19

2.4.3 Desktop-Mounting..................................................... 20

2.4.4 VESA-ARM Mounting................................................ 22

2.5 HDD Installation........................................................ 24

2.6 DRAM Installation ..................................................... 27

2.7 Wireless LAN Card Installation................................. 29

CHAPTER 3 AMI BIOS SETUP UTILITY.......................................... 33

3.1 Starting...................................................................... 33

3.2 Navigation Keys ........................................................ 33

3.3 Main Menu ................................................................ 35

3.4 Advanced Menu........................................................ 36

3.5 PCI PnP Menu .......................................................... 50

3.6 Boot Menu................................................................. 53

3.7 Security Menu........................................................... 58

3.8 Chipset Menu............................................................ 60

3.9 Exit Menu.................................................................. 65

CHAPTER 4 DRIVERS INSTALLATION ......................................... 67

vii

4.1 System ...................................................................... 67

4.2 Touch Screen............................................................ 68

4.2.1 Specification.............................................................. 68

4.2.2 Driver Installation- Windows XP................................ 68

4.3 Embedded O.S. ........................................................ 71

4.3.1 Windows XP Embedded........................................... 71

4.3.2 Windows CE.NET 6.0............................................... 72

viii

MEMO:

GOT-5152T5152T User’s Manual

Introduction

CHAPTER 1

INTRODUCTION

This chapter contains general information and detailed

specifications of the GOT-5152T-830. Chapter 1 includes the

following sections:

General Description

Specification

Dimensions

I/O Outlets

Package List

1.1 General Description

The GOT-5152T-830 is a fan-less and compact-size touch

panel computer, equipped with a 15”TFT LCD display and low

power consumption Intel○RAtomTM N270 1.6GHz processor with

FSB 533MHz. The GOT-5152T-830 supports Windows®XP,

Windows®CE.NET and Windows®XP embedded. The panel

computer is able to install a CompactFlash™card and provide

a Mini card slot for wireless module. Its excellent ID and

friendly user interface make it a professional yet easy-to-use

panel computer. The GOT-5152T-830 is an ideal for space-

limited applications in factory automation, machine maker

operating systems, building automation, and more.

GOT-5152T5152T User’s Manual

Introduction

GOT-5152T-830: 15”TFT XGA Fanless Touch Panel Computer

Reliable and Stable Design

The GOT-5152T-830 adopts a fanless cooling system

and a CompactFlash™card, which makes it suitable

for vibration environments.

Embedded O.S. Supported

The GOT-5152T-830 not only supports Windows®XP,

but also supports embedded OS, such as Windows®

CE.NET, and Windows®XP embedded. For storage

device, the GOT-5152T-830 supports CompactFlash™

card and 2.5”SATA device.

Industrial-grade Product Design

The GOT-5152T-830 has an incredible design to be

used in different industrial environments.

The front bezel meets the IP65/NEMA4 standard.

For connecting other devices, the GOT-5152T-830 also features

several interfaces: USB, Ethernet, and RS-232/422/485.

Tabla de contenidos

Otros manuales de Panel táctil de AXIOMTEK

AXIOMTEK

AXIOMTEK GOT815W-511 Manual de usuario

AXIOMTEK

AXIOMTEK GOT5152T-834 Manual de usuario

AXIOMTEK

AXIOMTEK MPC153W-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT5840T-832 Manual de usuario

AXIOMTEK

AXIOMTEK GOT318W-521-PCT Manual de usuario

AXIOMTEK

AXIOMTEK P1127E-500 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3187WL-834-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3106TL-830 Manual de usuario

AXIOMTEK

AXIOMTEK GOT817L-511 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3126T-832 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3187W-832-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT107W-319 Manual de usuario

AXIOMTEK

AXIOMTEK GOT315W-521-PCT Manual de usuario

AXIOMTEK

AXIOMTEK P1177E-500 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3156T-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT115-319 Manual de usuario

AXIOMTEK

AXIOMTEK GOT-3156TL-830 Manual de usuario

AXIOMTEK

AXIOMTEK P1177E-842 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3217W-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-502-PCT/FR Manual de usuario

AXIOMTEK

AXIOMTEK GOT3217WL-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT-5571TL-621 Manual de usuario

AXIOMTEK

AXIOMTEK IFO2175-850-FL Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT815-834 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario