AXIOMTEK OPS883 Series Manual de usuario

OPS883 Series

Intel Open Pluggable Specification

Box

User’s Manual

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, and any liability arising from such use.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make

any commitment to update the information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice

No part of this document may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of Axiomtek Co., Ltd.

November 2016, Version A2

Printed in Taiwan

iii

Safety Approvals

CE Marking

FCC Class A

FCC Compliance

This equipment has been tested in compliance with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are mean to provide reasonable protection

against harmful interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or radiate radio frequency

energy and cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following methods:

A. Increase the separation between the equipment and receiver.

B. Connect the equipment to another outlet of a circuit that does not connect with the

receiver.

C. Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with the emission limits.

Safety Precautions

Before getting started, please read the following important safety precautions.

1. The OPS883 series does not come equipped with an operating system. An

operating system must be loaded first before installing any software into the

computer.

2. Be sure to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and place all electronic components

in any static-shielded devices. Most electronic components are sensitive to

static electrical charge.

3. Disconnect the power cord from the OPS883 series before any installation. Be

sure both the system and external devices turned OFF already. Make sure the

OPS883 series set to ground properly.

4. The brightness of the flat panel display will be getting weaker as frequently

used. However, the operating period varies depending on the application

environment.

5. The flat panel display is not susceptible to shock or vibration. When assembling

the OPS883 series, make sure toinstall it securely.

6. Do not leave this equipment in an uncontrolled environment where the storage

temperature is below 0℃or above 45℃. It may damage the equipment.

7. External equipment intended for connection to signal input/out or other

connectors shall comply with relevant UL/IEC standard.

8. Do not open the back cover of the system. If opening the cover for

maintenance is necessary, only allow technicians to implement it. Integrated

circuits on computer boards are sensitive to static electricity. To avoid

damaging chips from electrostatic discharge, observe the following precautions:

9. Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help to discharge any static

electricity on your body.

10. Please wear a wrist-grounding strap if you handling boards and eletronic

components.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel®and Atom™are registered trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of Microsoft Corporation.

VIA is a trademark of VIA Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics Corporation. Other brand names and

trademarks are the properties and registered brands of their respective owners.

Table of Contents

Disclaimers............................................................................................................... ii

Safety Approvals..................................................................................................... iii

Safety Precautions.................................................................................................. iv

CHAPTER 1 INTRODUCTION.................................................................................. 1

1.1 General Description............................................................................. 1

1.2 System Specifications......................................................................... 2

1.2.1 Main CPU Board..................................................................................................2

1.2.2 I/O System ...........................................................................................................2

1.3 Mechanical Assembly.......................................................................... 4

1.3.1 Dimensions..........................................................................................................4

1.3.2 I/O outlet ..............................................................................................................5

1.3.3 Mechanical Specifications.................................................................................6

1.3.4 Reference Design .............................................................................................11

1.4 Package List....................................................................................... 12

CHAPTER 2 HARDWARE INSTALLATION......................................................... 13

2.1 CPU, Storage, DRAM, Wireless & 3G module Installations............. 13

2.2 Pluggble Module Method................................................................... 22

CHAPTER 3 CONNECTORS .................................................................................. 23

3.1 Connectors......................................................................................... 23

3.1.1 JAE TX25 Connector (CN1)..............................................................................25

3.1.2 CPU FAN (CN2) .................................................................................................26

3.1.3 SIM Card Slot (CN4)..........................................................................................26

3.1.4 HDMI Connector (CN5).....................................................................................27

3.1.5 Power & Reset Button (CN6) ...........................................................................27

3.1.6 Audio MIC-IN Connector (SCN2) .....................................................................28

3.1.7 AudioLine-Out Connector (SCN3)...................................................................28

3.1.8 Battery 2 PIN (BAT1).........................................................................................28

3.1.9 Mini Card Slot (SCN1).......................................................................................29

3.1.10 SSW1 Setting ....................................................................................................30

3.1.11 SATA & SATA Power Connector (SATA1) ....................................................31

3.1.12 RJ45 (I217LM) (LAN1).......................................................................................32

3.1.13 USB 3.0 Port (SUSB1) ......................................................................................32

3.1.14 USB 2.0 Port (SUSB2/3) ...................................................................................33

3.1.15 COM Port (COM2).............................................................................................33

CHAPTER 4 AMI BIOS SETUP UTILITY.............................................................. 35

4.1 Starting............................................................................................... 35

4.2 Navigation Keys................................................................................. 35

4.3Main Menu .......................................................................................... 36

4.4Advanced Menu ................................................................................. 37

4.5 Chipset Menu ..................................................................................... 47

4.6 Boot Menu .......................................................................................... 53

4.7 Security Menu .................................................................................... 54

4.8 Save & Exit Menu............................................................................... 55

APPENDIX A REFERENCE DOCUMENTS ......................................................... 57

APPENDIX B WATCHDOG TIMER ....................................................................... 59

Watchdog Timer Setting.................................................................................... 59

Using the Watchdog Function Start................................................................. 59

APPENDIX C iAMT SETTINGS.............................................................................. 61

C.1 Entering MEBx ................................................................................... 61

C.2 Set and Change Password................................................................ 61

vii

C.3 iAMT Settings..................................................................................... 63

C.4 iAMT Web Console............................................................................. 66

viii

This page is intentionally left blank.

OPS883 User’s Manual

Introduction

CHAPTER 1

INTRODUCTION

This chapter contains general information and detailed specifications of the OPS883 series.

Chapter 1 includes the following sections:

General Description

Specification

Michanical Assembly

Package List

1.1 General Description

Intel Open Pluggable Specification (OPS) Compliance

OPS883 series is based on the 4th generation Intel®Core™processor on board with

Intel®Q87 Express Chipset platform and it also future products. The Pluggable

Module is dedicated to provide an interchangeable solution to the digital signage

media players with compatible connector. This document provides the module form

factor, connector specification, reference thermal solution, and boundary conditions

in order to ensure the functionally of the module in all compatible display panel

system.

OPS883 series meets Intel Open Pluggable Specification for design and

development, simplifying system upgrade maintenance for manufacturers and

developers that supports Intel®4th Generation Core I series family, which stand for

high flexible and user-friendly digital signage applications.

Easy maintenance

OPS883 series offers a best solution for digital signage market. Compliant with Intel

OPS architecture, digital signage players are capable of deploying interchangeable

systems faster and easing upgrading/maintenance, while lowering costs for

development and implementation. Additionally, having the ability to simply slot-in

and out the unique pluggable engine box makes daily hassle easier and faster for

users.

OPS883 series has pluggable engine box design; you can change storage, DRAM

and update configurations more easily

OPS883 User’s Manual

Introduction

1.2 System Specifications

1.2.1 Main CPU Board

CPU

LGA1150 socket type 4th generation Intel® Core™ i5/i3/Celeron Processor

System Chipset

Intel® Q87 PCH

BIOS

American Megatrends Inc.

UEFI (Unified Extensible Firmware Interface) BIOS.

System Memory

One socket 204-pin DDR3 1333/1600MHz SO-DIMM, maximun up to 8GB

Wireless Module (Optional)

Optional IEEE802.11 b/g/n, Bluetooth 2.0

1.2.2 I/O System

Standard I/O

One HDMI (with 4K solution)

Two USB ports 2.0

One USB ports 3.0

One RS-232(COM2)

One Power on /Off button

One Reset button

Ethernet

10/100/1000Mbps Ethernet (with Intel®I217)

Audio

Line-out/ Mic-in

Expansion

One Full-size PCI Express Mini card (USB+PCIe signals supported)

Storage

One. 2.5” SATA HDD tray

One mSATA option through Mini PCIe by SSW1 selection

Net Weight

0.9Kg(1.99 lb) without cooler

Otros manuales para OPS883 Series

Tabla de contenidos

Otros manuales de Panel táctil de AXIOMTEK

AXIOMTEK

AXIOMTEK GOT3126T-832 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3157W-834-PCT Manual de usuario

AXIOMTEK

AXIOMTEK IFO2225-830 Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT815-834 Manual de usuario

AXIOMTEK

AXIOMTEK OPS883-H Series Manual de usuario

AXIOMTEK

AXIOMTEK MPC170-831-DC Manual de usuario

AXIOMTEK

AXIOMTEK P1177E-842 Manual de usuario

AXIOMTEK

AXIOMTEK GOT3187WL-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT710S-837-R-E3845-24-110VDC Manual de usuario

AXIOMTEK

AXIOMTEK GOT315WL-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT3156T-832 Manual de usuario

AXIOMTEK

AXIOMTEK MPC103-845 Manual de usuario

AXIOMTEK

AXIOMTEK GOT815L-511 Manual de usuario

AXIOMTEK

AXIOMTEK GOT817L-511 Manual de usuario

AXIOMTEK

AXIOMTEK GOT318W-521-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-502-PCT/FR Manual de usuario

AXIOMTEK

AXIOMTEK IFO2225-873 Series Manual de usuario

AXIOMTEK

AXIOMTEK GOT5840T-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT321W-521 Manual de usuario

AXIOMTEK

AXIOMTEK MPC175-873 Series Manual de usuario

AXIOMTEK

AXIOMTEK MPC153W-834 Manual de usuario

AXIOMTEK

AXIOMTEK GOT315A-ELK-WCD Manual de usuario

AXIOMTEK

AXIOMTEK GOT3217W-845-PCT Manual de usuario

AXIOMTEK

AXIOMTEK GOT5840T-832 Manual de usuario

Manuales populares de Panel táctil de otras marcas

FlowLine

FlowLine Data loop Manual de usuario

ALPEX

ALPEX AEx-8 P Series Manual de usuario

Ltech

Ltech E5S Manual de usuario

Harman

Harman AMX MODERO S MSD-701-L2 Manual de usuario

Acnodes

Acnodes PC 1150 Manual de usuario

AIS

AIS IP10IA99 series Manual de usuario

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manual de usuario

YASKAWA

YASKAWA TP 610C Manual de usuario

B&R

B&R Power Panel C Series Manual de usuario

Beijer Electronics

Beijer Electronics X2 control Manual de usuario

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manual de usuario

Qomo

Qomo QIT1386 Manual de usuario

DFI

DFI KS104-CD Manual de usuario

AMX

AMX AXP-PPC Guía

Sartorius

Sartorius X3 PR 5410 Manual de usuario

AMX

AMX Modero X Series Manual de usuario

Advantech

Advantech TPC-30 Series Manual de usuario

B&R Industries

B&R Industries MAPPC900-ENG Manual de usuario