AXIOMTEK DSP511 Series Manual de usuario

DSP511 Series

Digital Signage Player with 11th Gen

Intel® Core™ i5/i3 & Celeron®

Processor

Disclaimers

This manual has been carefully checked and believed to contain accurate information.

Axiomtek Co., Ltd. assumes no responsibility for any infringements of patents or any third

party’s rights, or any liability arising from such uses.

Axiomtek does not warrant or assume any legal liability or responsibility for the accuracy,

completeness or usefulness of any information in this document. Axiomtek does not make

any commitment to update any information in this manual.

Axiomtek reserves the right to change or revise this document and/or product at any time

without notice.

No part of this document may be reproduced, stored in a retrieval system, or transmitted in

any forms or by any means, electronic, mechanical, photocopying, recording, among others,

without prior written permissions of Axiomtek Co., Ltd.

December 2021, Version A1

Printed in Taiwan

iii

Safety Precautions

Before getting started, please read the following important safety precautions.

1. The DSP511 does not come with an operating system which must be loaded first before

installation of any software into the computer.

2. Be sure to ground yourself to prevent static charge when installing any internal

components. Use a wrist grounding strap and place all electronic components in any

static-shielded devices. Most electronic components are sensitive to static electrical

charge.

3. Disconnect the power cord from the DSP511 prior to making any installation. Be sure

both the system and all external devices are turned OFF. Sudden surge of power could

ruin sensitive components. Make sure the DSP511 is properly grounded.

4. Make sure the voltage of the power source is correct before connecting it to any power

outlet.

5. Turn Off system power before cleaning. Clean the system using a cloth only. Do not

spray any liquid cleaner directly onto the screen.

6. Do not leave equipment in an uncontrolled environment where the storage temperature

is below -40℃or above 80℃as it may damage the equipment.

7. Do not open the system’s back cover. If opening the cover for maintenance is a must,

only a trained technician is allowed to do so. Integrated circuits on computer boards are

sensitive to static electricity. To avoid damaging chips from electrostatic discharge,

observe the following precautions:

⚫Before handling a board or integrated circuit, touch an unpainted portion of the

system unit chassis for a few seconds. This will help discharge any static electricity

on human body.

⚫When handling boards and components, wear a wrist grounding strap available from

most electronic component stores.

Classifications

1. Degree of production against electric shock: not classified

2. Degree of protection against ingress of water: IP40

3. Equipment not suitable for use in the presence of a flammable anesthetic mixture with

air, oxygen or nitrous oxide.

4. Mode of operation: Continuous

General Cleaning Tips

Please keep the following precautions in mind while understanding the details fully before

and during any cleaning of the computer and any components within.

A piece of dry cloth is ideal to clean the device.

1. Be cautious of any tiny removable components when using a vacuum cleaner to absorb

dirt on the floor.

2. Turn the system off before clean up the computer or any components within.

3. Avoid dropping any components inside the computer or getting circuit board damp or wet.

4. For cleaning, be cautious of all kinds of cleaning solvents or chemicals which may cause

allergy to certain individuals.

5. Keep foods, drinks or cigarettes away from the computer.

Cleaning Tools:

Although many companies have created products to help improve the process of cleaning

computer and peripherals, users can also use house hold items accordingly for cleaning.

Listed below are items available for cleaning computer or computer peripherals.

Pay special attention to components requiring designated products for cleaning as

mentioned below.

⚫Cloth: A piece of cloth is the best tool to use when rubbing up a component. Although

paper towels or tissues can be used on most hardware as well, it is recommended to

use a piece of cloth.

⚫Water or rubbing alcohol: A piece of cloth may be somewhat moistened with water or

rubbing alcohol before being rubbed on the computer. Unknown solvents may be

harmful to plastic parts.

⚫Absorb dust, dirt, hair, cigarette and other particles outside of a computer can be one of

the best methods of cleaning a computer. Over time these items may restrict the airflow

in a computer and cause circuitry to corrode.

⚫Cotton swabs: Cotton swaps moistened with rubbing alcohol or water are applicable to

reach areas in keyboard, mouse and other areas.

⚫Foam swabs: If possible, it is better to use lint free swabs such as foam swabs.

【Note】: It is strongly recommended that customer should shut down the system before

start to clean any single components.

Please follow the steps below:

1.Close all application programs;

2.Close operating software;

3.Turn off power switch;

4.Remove all devices;

5.Pull out power cable.

Scrap Computer Recycling

Please inform the nearest Axiomtek distributor as soon as possible for suitable solutions in

case computers require maintenance or repair; or for recycling in case computers are out of

order.

Trademarks Acknowledgments

Axiomtek is a trademark of Axiomtek Co., Ltd.

IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.

Intel®and Pentium®are registered trademarks of Intel Corporation.

MS-DOS, Microsoft C and QuickBasic, Windows 10, Windows 8.1, Windows 8, Windows 7,

Windows XPE, Windows XP, Windows CE embedded, Linux are trademarks of Microsoft

Corporation.

Other brand names and trademarks are the properties and registered brands of their

respective owners.

 
vii 
Table of Contents 
Disclaimers............................................................................................................. ii 
Safety Precautions................................................................................................ iii 
Classifications.......................................................................................................iv 
General Cleaning Tips ...........................................................................................v 
Scrap Computer Recycling................................................................................... vi 
SECTION 1 INTRODUCTION.........................................................................1 
1 General Descriptions.........................................................................1 
2 System Specifications....................................................................... 2 
2.1 CPU ...................................................................................................................2 
2.2 I/O System ........................................................................................................3 
2.3 System Specifications.....................................................................................4 
3 Dimensions ........................................................................................5 
3.1 System Dimensions.........................................................................................5 
3.2 Wall/VESA-mount Bracket Dimensions.........................................................6 
4 I/O Outlets...........................................................................................7 
5Packing List........................................................................................ 8 
SECTION 2 HARDWARE INSTALLATION ...................................................9 
1Installation of SO-DIMM Memory .....................................................9 
SECTION 3 JUMPER & CONNECTOR SETTINGS.....................................15 
1 Locations of Jumpers & Connectors............................................. 15 
2 Summary of Jumper Settings.........................................................16 
2.1Auto Power On (JP2).....................................................................................17 
2.2Restore BIOS Optimal Defaultes (JP3)........................................................17 
3 Connectors .....................................................................................18 
3.1 DC Power Jack Connector (screw type) (CN8)...........................................19 
3.2 COM1 DB9 Connector (CN24).......................................................................19 
3.3HDMI Connector (CN3~CN6).........................................................................20 
3.4 2.5GbE LAN Port (CN1) .................................................................................21 
3.5 One GbE LAN Port (CN2) ..............................................................................21 
3.6ATX Power On/Off button (CN20).................................................................22 
3.7 Reset button (CN23) ......................................................................................22 
3.8Remote Power Switch Connector (CN21) ...................................................22 
3.9USB 2.0 Port (CN7) ........................................................................................22 
3.10 USB 3.2 Port (CN15/CN16/CN17)..................................................................23 
3.11 Audio Jack Line-out Connector (CN25) ......................................................23 
3.12 M.2 B Key Connector (CN10)........................................................................24 
3.13 SIM Card slot (CN11).....................................................................................26 
3.14 M.2 M KEY Connector (CN13) ......................................................................27 
3.15 M.2 E KEY Connector (CN12).......................................................................29 
3.16 Device Management Port (CN19).................................................................30 
3.17 Clear EDID Button (CN22).............................................................................30 
SECTION 4 BIOS SETUP UTILITY..............................................................31 
1 Starting.............................................................................................31 
2 Navigation Keys...............................................................................31 
3 Main Menu........................................................................................ 32 
4 Advanced Menu ............................................................................... 33 
5 Chipset Menu ...................................................................................46 
6 Security Menu.................................................................................. 48 

viii

4.7Boot Menu ...................................................................................... 49

4.8Save & Exit Menu...........................................................................50

APPENDIX A WATCHDOG TIMER .............................................................53

About Watchdog Timer ..................................................................................53

Sample Program.............................................................................................. 54

DSP511 Series user’s Manual

Introduction

SECTION 1

INTRODUCTION

This section contains general information and detailed specifications of the DSP511.

Section 1 consists of the following sub-sections:

◼General Descriptions

◼System Specifications

◼Dimensions

◼I/O Outlets

◼Packing List

1.1 General Descriptions

The DSP511 is a fanless digital signage player that comes with an Intel® Core™i5-1145G7E,

i3-1115G4E, or Celeron® 6305E processor onboard (formally codename: Tiger Lake) with

low power consumption design. To fulfill the application needs of digital signage, smart retail,

and smart cities, the embedded system supports Windows®10 IoT and can be wall-mounted

and VESA mounted as optional requests.

The DSP511 features an ultra-slim size, low power consumption, and functions fundamental

to successful digital signage deployment. It is equipped with dual 260-pin DDR4-3200 SO-

DIMMs with up to 64GB memory capacity and has a full range of I/O interfaces to support RS-

232, audio, USB 3.2 and USB 2.0 signals. This compact fanless signage player is capable of

serving four independent displays with 4K resolution through its HDMI ports. Furthermore, the

DSP511 is offering 12 voltage DC power input and six antenna connectors for setting up Wi-

Fi or 5G networks.

DSP511 Series user’s Manual

Introduction

Features

⚫11th generation Intel® Core™ i5-1145G7E 4.1GHz, i3-1115G4E 3.9GHz,

Celeron®6305E 1.8GHz SoC

⚫2 x DDR4-3200 SO-DIMM max. up to 64GB

⚫1 COM port, 4 USB ports, 1GbE and 2.5GbE LANs

⚫4 HDMI 2.0 for 4K UHD content

⚫1 x M.2 M Key 2280 (SATA/NVMe) for storage

⚫1 x M.2 E Key 2230 for WLAN and WWAN

⚫1 x M.2 B Key 3052 for 4G/5G option

⚫Fanless, ultra-slim and compact design

⚫Suitable for digital signage and smart retail applications

Reliable and Stable Design

The DSP511 signage player comes equipped with Intel® Core™ i5-1145G7E 4.1GHz,

i3-1115G4E 3.9GHz, Celeron®6305E 1.8GHz, ultra-slim size and basic functions,

providing the best solution for smart retails and light industries.

Flexible Connectivity

The DSP511 comes with basic interfaces including one RS-232 port, three USB 3.2

ports, one USB 2.0 port, four HDMI, one GbE and one 2.5GbE LAN ports.

Embedded O.S. Supported

The DSP511 supports Windows®11, Windows®10 IoT and Linux.

1.2 System Specifications

1.2.1 CPU

⚫CPU

◼11th generation Intel® Core™ i5-1145G7E 4.1GHz, i3-1115G4E 3.9GHz,

Celeron® 6305E 1.8GHz SoC

⚫Chipset

◼SoC integrated

⚫BIOS

◼American Megatrends Inc. UEFI (Unified Extensible Firmware Interface)

BIOS.

⚫System Memory

◼Two 260-pin DDR4-3200 SO-DIMM sockets, up to 64GB at the maximum.

Otros manuales para DSP511 Series

Tabla de contenidos

Otros manuales de Señalización digital de AXIOMTEK

AXIOMTEK

AXIOMTEK OPS883 Series Manual de usuario

AXIOMTEK

AXIOMTEK OFP215 Series Manual de usuario

AXIOMTEK

AXIOMTEK DSH-146 Series Manual de usuario

AXIOMTEK

AXIOMTEK DSP500-523 Series Manual de usuario

AXIOMTEK

AXIOMTEK DSA-132 Series Manual de usuario

AXIOMTEK

AXIOMTEK DSP500-523 Series Manual de usuario

AXIOMTEK

AXIOMTEK OPS500 Series Manual de usuario

AXIOMTEK

AXIOMTEK OPS885 Series Manual de usuario

Manuales populares de Señalización digital de otras marcas

LG 72WS70MS-B Manual de usuario

SMART-AVI

SMART-AVI SIGNAGEPRO Manual de usuario

LG 65SM5D Manual de usuario

LG 55EW5TK-A.AUS Manual de usuario

KeyWest Technology

KeyWest Technology BREEZE Manual de usuario

XtendLan

XtendLan XL-DSP-183C Manual de usuario

LG 47VL10 Manual de usuario

LG WP400 Guía de inicio rápido

Dynascan

Dynascan DS861LR4 Manual de usuario

Classic Exhibits

Classic Exhibits SEGUE DESIGNS MOD-1363 Manual de usuario

LG 22XE1J Manual de usuario

protech

protech KT-7290 Manual de usuario

WebDT

WebDT 515A Instrucciones de montaje

Samsung

Samsung IWJ Series Manual de usuario

LG 84TR3B Manual de usuario

LG 55EJ5D Guía de inicio rápido

EVERI

EVERI Enrollment Kiosk Manual de usuario

LG 75XS4G Manual de usuario