AWS M Series Manual de usuario
V1.3
AWS MSeries
AWS Wind Turbine Controller with MPPT
User Manual
Model WW15-24-48
V1.3
Contents
1. Important Safety Warning .........................................................................................................１
2. Basic Information........................................................................................................................２
2.1 Introduction and Features .......................................................................................................２
2.2 Product Structure ....................................................................................................................３
3. Product Installation .......................................................................................................................５
3.1 Installation Notes ....................................................................................................................５
3.2 Installation and Wiring............................................................................................................６
3.2.1 Installation Steps ..................................................................................................................６
3.2.2 Installation Steps..................................................................................................................７
3.2.3 Electrical Connection...........................................................................................................８
4. Operation Interface Introduction.............................................................................................１０
4.1 LCD Display .......................................................................................................................１０
4.2 LCD Information Define.....................................................................................................１１
5. Trouble Shooting ........................................................................................................................１１
6. Technical Parameters.................................................................................................................１２
7. Warranty..................................................................................................................................２０
V1.3
１
1. Important Safety Warning
Before Using the controller, please read all instructions and cautionary markings on the unit and
this manual. Store the manual where it can easily be accessed.
This manual includes all safety warnings, installation, and operation guidance of MWM wind
controllers.
➢Before installing and using this controller, read all instructions and cautionary markings on the
controller and all appropriate sections of this guide.
➢Do not store flammable products within the same control room or area where the wind controller
is installed.
➢Do not open or dismantle any parts of the controller other than the required cable termination
cover where fitted.
➢Disconnect the AC input and DC output from controller before working on or maintain the
controller. Do not work on the controller within 5 minutes of de energization.
➢The controller is designed for indoor use only
➢Maintain ventilation as detailed in this manual
➢Install on noncombustible material only.
➢The DC supply to the controller must be fused.
➢Please use copper cable for line connection, and choose the right diameter of cable according to
the actual current.
➢To avoid a risk of fire and electric shock, make sure the existing wiring is in good condition and
that the wire is connected tightly.
➢Use anti oxidizing past on all connections.
V1.3
２
2. Basic Information
2.1 Introduction and Features
The AWS M series wind power generation controller is a controller which integrates MPPT
control and charge and discharge control. The power curve can be set by setting the wind turbine
voltage and current, which allows the wind turbine to operate within its best power output all the times.
(All AWS wind controller solar with AWS Wind turbines are preset, do not alter these setings)
Features:
➢Can be applied to grid-tied system, off-grid system and grid-tied energy storage system. Charge
function is optional.
➢MPPT tracking
➢Protection functions.
➢Solar PV integregrsation.
➢RS232/RS485/RJ45/GPRS/Bluetooth/Zigbee optional. (It can be monitored by app for those with
GPRS/Bluetooth/RJ45 connection)
V1.3
３
2.2 Product Structure
Chart1. Product Overview (1-3kW)
V1.3
４
Chart2. Product Overview (5-10kW)
①
Battery terminal
⑤
Manual brake switch
②
Dump load terminal
⑥
Browse button
③
Wind turbine terminal
⑦
LCD display
④
Communication device port
⑧
Unload indicator light
V1.3
５
Chart3: Dump Load with different power
3. Product Installation
3.1 Installation Notes
1) The controller must be kept indoors and well ventilated;
2) Environment temperature: -20～+40℃; Humidity: <=95%，no condensing
3) Altitude should not be more than 4000m (＞1000 m derating according to the GB/T3859.2
regulations).
4) Not to be installed in direct sunlight, sun exposure, rain, humidity, acid fog, and dust.
5) Ensure the correct battery voltage and polarity is connected to the controller.
6) The controller can only be connected to a wind turbine and PV within an the rated Voltage, current
and power characteristics.
V1.3
６
3.2 Installation and Wiring
3.2.1 Installation Steps
Chart 4: Installation Overview
V1.3
７
3.2.2 Installation Steps
Chart5: Installation Steps
V1.3
８
3.2.3 Electrical Connection
(1-3kW)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
