AVProConnect AC-EX100TT-UHD-T Manual de usuario
AC-EX100TT-UHD-T
AVProConnect
3518 N Casco Avenue ~ Sioux Falls, SD 57104
1-877-886-5112 ~ 605-274-6055
support@avproconnect.com
AC-EX100TT-UHD-T
Table Top/Under Table, Dual Input
(HDMI/VGA) Auto Sensing HDBaseT
Transmitter
1
Introduction
The AC-EX100TT-UHD-T is a 100m HDBaseT Tx with the ability to
be powered by the Rx. It features RS-232 & IR Pass-through inputs
along with its auto sensing HDMI and VGA ports.
Key benefits of using AC-EX100TT-UHD:
1) ULTRA HIGH DEFINITION: Our AC-EX100TT-UHD supports 4K up to 70M
(230FT) & HD up to 100M (330FT) with crystal clear 4K Resolution. NOTE:
High quality CAT6a shielded required for maximum performance.
2) DISTANCE: By using AC-EX100TT-UHD-T, the transmission distance for HD
1080P is up to 100 meters (330’) and with 4K it is up to 4K up to 70M (230')
3) AUTO SENSING: This Table-Top/Under Table Transmitter is designed to be
a "set it & forget it" piece of hardware. When the user plugs their devices in
(BYOD), the transmitter will automatically sense the signal and make it active.
If both inputs are in use, there is a simple button on the front to toggle inputs.
4) CONTROL: IR & RS-232 allow control of a rack or standalone projector/
display.
5) POWER: No local power is required when you use the AC-EX100-UHD-R2.
Power is provided by ultra-stable PoE technology. Optionally, you can power it
locally for use with any HDBaseT receiver.
2
AC-EX100TT-UHD-T
Applications:
This unit is designed to work flawlessly with all PC, VESA and traditional
resolutions up to and including 4K 60Hz 4:2:0 8-bit & HDR 4K 30 4:2:2 12-bit.
VGA supports DCI 2K, 1080P, 1920x1200x60. In addition to its compact and
robust design, The AC-EX100TT-UHD-T transmits digital signals up to 100
meters (328’) giving you ultimate flexibility, especially in large rooms
like libraries or auditorium style rooms/classrooms. For a complete
solution pair the table-top transmitter (AC-EX100TT-UHD-T) with
the AC-EX100-UHD-R2 HDBaseT Receiver to power the table-top
transmitter from afar using PoE, thus eliminating the need for a power
supply unit near the wall plate.
3
AC-EX100TT-UHD-T
Table-top/under-table HDBaseT Transmitter
■Features
•HDMI 2.0 & VGA Inputs
•4K 30 4:4:4, 4K60 4:2:0 HDMI Support
•HDR 4:2:2 12 Bit Support
•DCI 2K, 1080P, 1920x1080x60 VGA Support
•HDCP 2.2 & Earlier Supported
•100M (330ft) 0n 1080P, Up to 70m (230ft) on 4K (Cat6a)
•No Local Power Necessary (Powered by AC-EX100-UHD-R2)
•Rugged, long-life chassis
•Plug & Play auto input sensing
•Select-able input (If both are plugged in)
•Designed for the conference/classroom room so your customer can
focus on their meetings, not their video system.
•3.5mm Input for audio (with VGA input only)
•Single UTP/STP LAN cable (CAT-5E/6A) for all signals
•ESD protection circuitry (Inputs / Outputs) till 7KV.
•Transfer IR & RS-232 signals from Tx to Rx (From Control
Processor)
•I-Pass Feature for control system IR "pass-through"
•3-20v protection circuit built in for safe IR transport
•Compatible with HDBaseT displays, projectors, AVR's
•Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS,
Dolby TrueHD, DTS HD-Master Audio, Atmos.
•Can Cascade for ultra-long distance
4
AC-EX100TT-UHD-T
Notice
AVProConnect reserves the right to make changes to the hardware,
packaging and any accompanying documentation without prior written notice.
Warning
To reduce the risk of fire, electric shock or product damage:
Basic
6. Clean this device with
a dry cloth only.
1. Do not expose this device to
rain, moisture, dripping or
splashing and ensure that no
objects filled with liquids are
placed on or near the device.
2. Do not install or place this unit
in a bookcase, built-in cabinet or
in another confined space.
Ensure the unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct
the unit’s ventilation openings
with newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
5. Do not place sources of naked
flames, such as lighted candles,
on the unit.
7. Unplug this device
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.
5
AC-EX100TT-UHD-T
■What’s In The Box? Two ways to purchase:
6
AC-EX100TT-UHD-T
7
AC-EX100TT-UHD-T
■Specifications
8
AC-EX100TT-UHD-T
■Powering the AC-EX100TT-UHD-T
There are 2 ways to power the unit:
1. Use a HDBaseT Receiver that provides up stream power. We recommend
using the AC-EX100-UHD-R2.
2. If you will be using the unit directly into a NON PoE provider (AVR,
projector, display, or other HDBaseT receiver), you can power it using a
48v, .5A - 2 pin type power supply.
NOTE: In these diagrams, arrows indicate the flow of POWER, not other
signals.
Tx
OPTION 1: PoE From Receiver (AC-EX100-UHD-R2)
OPTION 2: Local power to work with other HDBaseT devices
HDBaseT Compatible Projector
CAT5/6/7 for
Audio & Video
Signals
Rx
AC-EX100TT-UHD-T
■Using Bi-Directional Power w/ AC-EX100-UHD-R2
Using the bi-directional PoE feature is fairly easy to do. Even though the AC-
EX100-UHD System is designed to handle "hot" changes. We strongly
recommend you switch directional power while the units are completely
unplugged from Power, HDMI or CAT Cable.
1. PoE direction is set by the dip switch on the Tx and Rx. You are setting
the PoE behavior for the unit. You are selecting whether you want the
unit to RECEIVE PoE or SEND PoE.
2. Here are the two possible modes.
EX1.
To Power from transmitter, PoE setting should be as follows: HDBT
Tx -- The PoE slide switch should be set to Tx.
HDBT Rx -- The PoE slide switch should be set to Rx.
EX2.
To Power from the receiver, PoE setting should be as follows: HDBT
Tx -- The PoE slide switch should be set to Rx.
HDBT Rx -- The PoE slide switch should be set to Tx.
3. Be sure you have the power supply plugged in on the newly selected PoE
origination side.
4. Continue normal operation.
AC-EX100TT-UHD-T (Tx)
AC-EX100-UHD-R2 (Rx)
Slide Switch Location
Slide Switch Location
9
10
AC-EX100TT-UHD-T
■IR Configuration
The AC-EX100TT-UHD-T has an IR input designed to work when
connected directly to control processors, or other IR signal generators
like Global Cache, On Controls, etc... IR signals are routed through
the entire HDBaseT link to the Rx (AC-EX100-UHD-R2).
This allows you to send control signals to:
1. The "Rack" to control and amplifier, matrix, AVR or similar for more
advanced systems.
2. Control power, volume, etc... of the remote projector/display
connected to the receiver.
Tabla de contenidos
Manuales populares de Transmisor de otras marcas
Dejero
Dejero EnGo 3x Manual de usuario
Rosemount
Rosemount 4600 Manual de usuario
Speaka Professional
Speaka Professional 2342740 Manual de usuario
trubomat
trubomat GAB 1000 Manual de usuario
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Manual de usuario
Rondish
Rondish UT-11 Manual de usuario
