Avocent DSR 1021 Manual de usuario

The Power of Being There®

Quick Installation Guide

DSR®Switch

DSR 1021/1022 Switches

The following instructions will help you

install and use your DSR switch.

Should you require further assistance, please

contact Avocent Technical Support.

To Contact Avocent Technical Support: Visit www.avocent.com 590-428-501B

To connect a DSR switch

Connecting power to the DSR switch

Turn off all servers that will be part of your

DSR switching system. Locate the power

cord that came with the DSR switch. Plug

one end into the power socket on the rear

of the DSR switch. Plug the other end into

an appropriate AC wall outlet.

Connecting the local port

Plug your VGA monitor, PS/2 keyboard and

mouse cables into the appropriately labeled

DSR ports.

Connecting a DSRIQ module to the

DSR switch

Choose an available port on the rear of your

DSR switch. Plug one end of a CAT 5 cable

(4-pair, up to 50 meters) into a numbered port

and plug the other end into the RJ-45 connector

of a DSRIQ module.

Connecting a server to the

DSRIQ module

Plug the DSRIQ module into the

appropriate ports on the back of a

server. Repeat this procedure for all

servers that are to be connected to the

DSR switch.

Connecting network and

remote users

Plug a CAT 5 cable from your Ethernet

network into the LAN connector on the back

of your DSR switch. Network users will

access the DSR switch through this port.

NOTE: The network setting can be

conﬁgured via the local port using the

OSCAR®graphical user interface.

(Continued on reverse side)

Ethernet

Telephone

Network

Modem

Local

Connection

Server

PM IPDU

Server

RJ-45

Adaptor

The Power of Being There®

Quick Installation Guide

DSR®Switch

DSR 1021/1022 Switches

The following instructions will help you

install and use your DSR switch.

Should you require further assistance, please

contact Avocent Technical Support.

To Contact Avocent Technical Support: Visit www.avocent.com 590-428-501B

To connect a DSR switch

(continued from reverse side)

Connecting an external modem

(optional)

The DSR switch may also be accessed

using an ITU V.92, V.90 or V.34-compatible

modem. Plug one end of a 9-pin serial

cable into the MODEM connector on the

back of your DSR switch. Plug the other

end into the appropriate port on the back of

the modem.

NOTE: Using a modem connection instead

of a LAN connection will limit the

performance capability of your DSR switch.

Connecting the PM IPDU to the

DSR switch (optional)

Plug one end of the RJ-45 cable supplied

with the PM Intelligent Power Distribution Unit

(IPDU) into the SPC connector on the DSR

switch. Using the supplied RJ-45 adaptor,

plug the other end of the cable into the PM

IPDU. Plug the power cords from the target

devices into the PM IPDU. Plug the PM IPDU

into an appropriate AC wall outlet.

Turning on targets and the switch

Turn on each target device and then turn on

the DSR switch.

For additional information

For further instructions on DSR switch

connection, software setup and security

conﬁguration, please refer to the installer/user

Ethernet

Telephone

Network

Modem

Local

Connection

Server

PM IPDU

Server

RJ-45

Adaptor

guide included with the switch.

Visit www.avocent.com for the latest

DSR software and ﬁrmware updates.

Otros manuales para DSR 1021

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Avocent

Avocent

Avocent AutoView 1415 Manual de usuario

Avocent

Avocent AMX Switch Series Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1020 Manual de instrucciones

Avocent

Avocent AutoView 3050 Manual de usuario

Avocent

Avocent DSR Series DSR1021 Manual de instrucciones

Avocent

Avocent DSRTM 1021 Instrucciones de instalación y mantenimiento

Avocent

Avocent AMX5010 Manual de usuario

Avocent

Avocent DSR Series Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView SwitchView IC Manual de usuario

Avocent

Avocent AutoView 1415 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR1031 Manual de instrucciones

Avocent

Avocent DSR Series DSR1020 Manual de usuario

Avocent

Avocent DSR Series DSR1022 Manual de usuario

Avocent

Avocent AutoView 2030 Manual de usuario

Avocent

Avocent AutoView Wireless Instrucciones de instalación y mantenimiento

Avocent

Avocent AutoView 1515 Manual de usuario

Avocent

Avocent DSR Series DSR2020 Instrucciones de instalación y mantenimiento

Avocent

Avocent SWITCHVIEW PC Manual de usuario

Avocent

Avocent AutoView 1000R Manual de usuario

Avocent

Avocent AUTOVIEW 3008 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR SWITCH - Instrucciones de instalación y mantenimiento

Avocent

Avocent SwitchView 1000 Instrucciones de instalación y mantenimiento

Avocent

Avocent DSR Series DSR2035 Manual de instrucciones

Avocent

Avocent SwitchView Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario