Avital 2101L Manual de usuario
OWNER’S GUIDE
MODEL
2101L
©2015 Directed, All rights reserved. G2101L 2015 04
The company behind Avital®Auto Security Systems
is Directed.
Since its inception, Directed has had one purpose,
to provide consumers with the finest vehicle security
products and accessories available. The recipient of
nearly 100 patents and Innovations Awards in the field
of advanced electronic technology.
Quality Directed products are sold and serviced
throughout North America and around the world.
Call (800) 876-0800 for more information about our
products and services.
Vista, CA 92081
www.avital.com
Directed is committed to delivering world class
quality products and services that excite and
delight our customers.
IT'S YOUR CAR - CONTROL IT FROM THE START
Table of contents
What is included...................................................................................................... 2
Your warranty .......................................................................................................... 2
Important information .............................................................................................. 3
FCC/id notice.................................................................................................... 3
System maintenance........................................................................................ 4
Replacement remote controls .......................................................................... 4
Transmitter functions............................................................................................... 5
Standard configuration..................................................................................... 5
Using your system .................................................................................................. 7
Locking............................................................................................................. 7
Unlocking ......................................................................................................... 7
Disabling the system without a transmitter ...................................................... 8
To bypass the starter kill: ................................................................................. 8
Audible mode................................................................................................... 8
Valet mode ....................................................................................................... 8
Panic mode ...................................................................................................... 9
Rapid resume logic................................................................................................ 10
Programming options ............................................................................................ 10
Glossary of terms .................................................................................................. 11
Security & convenience expansions ..................................................................... 12
Quick reference guide ........................................................................................... 15
Limited lifetime consumer warranty....................................................................... 17
Notes ..................................................................................................................... 19
2© 2015 Directed. All rights reserved.
What is included
• The control module
• A pair of four-button transmitters
• A status LED indicator light
• A push-button Valet®switch
• Your warranty registration
Your warranty
Your warranty registration must be completely filled out
and returned within 10 days of purchase. Your product
warranty is not valid if the warranty registration is not
returned. Make sure you receive the warranty registra-
tion from your dealer. It is also necessary to keep your
proof of purchase, which reflects that the product was
installed by an authorized dealer. You may also register
online at www.prodregister.com/directed.
3
© 2015 Directed. All rights reserved.
Important information
Congratulations on the purchase of your keyless entry
system. Due to the complexity of this system, it must
be installed by an authorized dealer only. Installation
of this product by anyone other than an authorized
dealer voids the warranty. All dealers are provided with
a preprinted dealer certificate to verify that they are
authorized.
By carefully reading this Owner’s Guide prior to using
your system, you will maximize the use of this system
and its features.
You can print additional or replacement copies of
this manual by accessing the Directed website at:
www.avital.com.
FCC/id notice
This device complies with Part 15 of FCC rules. Operation
is subject to the following conditions: (1) This device
may not cause harmful interference, and (2) This device
must accept any interference received, including inter-
ference that may cause undesirable operation.
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate this device.
4© 2015 Directed. All rights reserved.
412 Series
System maintenance
The system requires no specific maintenance. Your
remote is powered by a small, lightweight 3-volt lithium
battery (CR2032) that will last approximately one year
under normal use. When the battery begins to weaken,
operating range is reduced and the LED on the remote
starts to dim.
Replacement remote controls
If additional remote controls are desired,
please see your authorized dealer or visit us at:
www.directedstore.com to order. Your replacement
part number is 7143L.
5
© 2015 Directed. All rights reserved.
Transmitter functions
The receiver uses a computer-based learn routine to
learn the transmitter buttons. This makes it possible to
assign any specific transmitter button, or combination of
buttons, to any receiver function. The transmitter initially
comes programmed with the Standard Configuration,
but may also be customized by an authorized dealer.
The transmitter buttons indicated in all of the instructions
in this manual correspond to a Standard Configuration
transmitter.
Standard configuration
- The locking function is controlled by pressing
this button for one second. Pressing this button for two
seconds also activates Panic mode.
- The unlocking function is controlled by pressing
this button for one second.
- An optional auxiliary function such as trunk release
is controlled by pressing this button for 1.5 seconds.
Audible mode is activated by pressing this button.
The auxiliary output controls _______________________.
- The panic feature is controlled by pressing this
button for two seconds.
6© 2015 Directed. All rights reserved.
and
- An optional auxiliary convenience or expan-
sion function that has been added to your system can
be activated by pressing these buttons simultaneously.
The auxiliary output controls
_____________________.
7
© 2015 Directed. All rights reserved.
Using your system
Locking
Pressing
for one second locks the doors and acti-
vates the optional Failsafe® Starter Kill (if installed). The
parking lights flash once to confirm the system is locked.
While the system is locked, the status LED flashes once
per second.
The starter kill prevents the vehicle’s starter from
cranking. If you press lock again within three seconds
of the initial press, audible mode is activated for that one
operation only.
Note: Manually locking the vehicle does not
enable the starter kill.
Unlocking
Pressing
for one second unlocks the doors. The
parking lights flash twice to confirm the system is
unlocked. The starter kill (if installed) is deactivated. The
status LED will turn off.
Note: Manually unlocking the vehicle does not
disable the starter kill.
8© 2015 Directed. All rights reserved.
Disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can
manually override the starter kill (if installed). To do
this, you must have the vehicle’s ignition key and know
where the Valet®switch is located. Be sure to check
with the installer for the location of the Valet®switch.
To bypass the starter kill:
1. Turn the ignition on.
2. Press and release the
Valet switch within 10
seconds. The status LED
stops flashing and the vehicle
starts. If the vehicle does not start, you may have waited
too long. Turn the ignition off and repeat the process.
Location of Valet Button_________________________________
Audible mode
To temporarily turn on the lock or unlock horn honk(s),
press for less than one second before locking or
unlocking. The confirmation honk(s) will be present for
that one operation only.
Valet mode
You can prevent your system from activating the starter
kill (if installed) using Valet®Mode. This is very useful
DRW-35
9
© 2015 Directed. All rights reserved.
when having the vehicle serviced. In Valet®Mode the
starter kill cannot be activated even with the transmitter,
but all convenience functions (door locks, trunk release,
etc.) will continue to work normally.
To enter or exit Valet®Mode:
1. Turn the ignition on.
DRW-35
2. Turn the ignition off.
3. Press and release the
Valet switch within 10
seconds.
The status LED lights steadily if you are entering Valet
Mode and turns off if you are exiting Valet Mode.
Panic mode
If you are threatened in or near your vehicle, you can
attract attention by triggering the system with your
transmitter. Just press or
for two seconds to
enter Panic Mode. In Panic Mode the horn honks (if
connected), and the parking lights will flash for 30
seconds. To stop Panic Mode at any time, press
or
again.
Note: In order for Panic Mode to work, the
vehicle’s horn and parking lights must be
connected.
Otros manuales para 2101L
4
Tabla de contenidos
Otros manuales de Sistema de seguridad de Avital
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario