Avid Technology ISIS 5000 Manual de usuario
Installation Considerations:
See the Setup Guide for any details related to the steps in this guide; such as power
requirements, rack mounting considerations, and other more in-depth instructions.
The Setup Guide is available in the software kit, or via download at: http://www.avid.
com/US/support. Click the link titled Knowledgebase on the right side of the screen
and search for ISIS 5000 Setup Guide. You will need to download Adobe’s Acrobat
Reader®or a similar PDF viewer before viewing the guide.
Unpack and make sure you have all of the components detailed in the section below
before you continue. A second person is recommended for lifting and securing the
system in place.
Included:
Not Included:
USB Keyboard, USB Mouse, Monitor, Workstation or Laptop (PC or Macintosh).
4 GB USB Drive (1) 16 GB USB Drive (1)
Engine (1) and Drives (16)
License (1)
Power Cables (2)Ethernet Cables (4)
1
Front Bezel (1)
Step 1a (Direct Connect)
• Place the Engine in its physical location. (E.g. Rack mount).
• Connect power cables, keyboard, monitor, and mouse.
• Connect Ethernet network cables to the ISIS using the diagram below.
• Continue with Step 2 (page 5).
Rear view of the ISIS Engine.
Do not use the middle two Ethernet ports. They are reserved for Storage
Engine Resiliency.
If you have purchased the optional 4-port Ethernet board, see the
ISIS 5000 Setup Guide for installation instructions.
To Clients
Connect four
Ethernet cables to
the outside ports.
x
x
2
For different wiring topologies please refer to the Setup Guide located in the
software kit, or via download at: http://www.avid.com/US/support. Click the link
titled Knowledgebase on the right side of the screen and search for ISIS 5000
Setup Guide.
Hardware Setup
Step 1b (Single Switch):
• Place the Engine and Switch in their physical locations. (E.g. Rack mount.)
• Connect power cables, keyboard, monitor, and mouse.
• Insert Transceivers and connect network cables: Use Diagram A for 4 x 1 Gb
Ethernet; or, use Diagram B for 1 x 10 Gb Ethernet.
• Continue with Step 2 (page 5).
Rear view of the
ISIS Engine
P28
27
XFP26
AC
XFP25
DC
Alarm
STACKID
S25-01-GE-24V
x
x
To Clients
Front view of the Force10 S25 switch
3
Diagram B: Use this diagram for single switch, 10 Gb Ethernet connection.
Diagram A: Use this diagram for single switch, 1 Gb Ethernet connection.
Rear view of the Force10 S25 switch
To 2nd Engine (optional)
Hardware Setup
Step 1c (Stacked Switches)(10 Gb Module):
• Place the Engine and Switch in their physical locations. (E.g. Rack mount.)
• Connect power cables, keyboard, monitor, and mouse.
• Insert Transceivers and connect network cables using the diagram below.
• Continue with Step 2 (page 5). Rear view of the ISIS Engine
P28
27
XFP26
AC
XFP25
DC
Alarm
STACKID
S25-01-GE-24V
To Ethernet Clients
Rear view of two stacked Force10 S25 switches.
To Optical Clients
(SFP required)
P28
27
XFP26
AC
XFP25
DC
Alarm
STACKID
S25-01-GE-24V
Front view of two Force10
S25 stacked switches.
(See the ISIS 5000 Setup Guide for proper
installation of 10 Gb and stacking modules.)
To 2nd Engine (optional)
4
To 3rd Engine (optional)
To 4th Engine (optional)
To 1st Engine, or System Director
Hardware Setup
Step 2 (Installing the Drives):
• Insert the 16 drives into the Engine’s drive bays. Start from the bottom of the
Engine and work your way up for better visibility during install.
• Make sure the latch on the front of the drive is in the open position, before
insertion, by pushing the locking button on the front.
• Repeat this step for each additional Engine.
The drive once inserted should not
move or wiggle at all. Make sure
the latch is closed and the drive is
properly seated before continuing
on to the next drive.
Insert the drives with
the latch open.
Insert the drives from
the bottom up.
5
Hardware Setup
Step 3 (Connecting to Clients and Powering Up):
• Connect the Ethernet cables to the appropriate clients.
• Press the power button on the Engine.
• Repeat this step for each additional Engine.
Front view of the ISIS Engine.
Power Button
6
You are finished with the Hardware Setup. The next steps will guide you through
the Software Installation. For more detailed help with any of the steps in this
section, problems, or questions, please reference the ISIS 5000 Setup Guide
which is available in the software kit, or via download at: http://www.avid.com/
US/support. Click the link titled Knowledgebase on the right side of the screen
and search for ISIS 5000 Setup Guide.
Hardware Setup
Step 1 (Installing the Software From the USB Drive):
• Login to Windows on each ISIS 5000 Engine using the following:
Username: Administrator
Password: is-admin
Avid recommends changing the defaults as soon as possible.
• Drag the contents of the 4 GB USB Drive on to the ISIS 5000 System and
click the file named “Autorun.exe.”
Click the file named “Autorun.exe” to begin installation.
7
Software Installation
Step 2 (Installing the Software)
• Choose whether the Engine you are setting up will be a System Director or not.
If you only have one Engine you must make it the System Director. If you have
multiple Engines; make the first one you set up the System Director. For Dual
System Directors please refer to the ISIS 5000 Setup Guide.
• Click “Apply.”
Select ISIS 5000 Engine/System Director to make this Engine a System Director.
Avid strongly encourages you to make a
System Restore backup after you complete
the installation. Follow the instructions in the
Setup Guide, using the 16 GB USB drive,
and the “Create Recovery USB Drive” link in
the installer.
This column shows what
action will be taken when
the “Apply” button is
clicked.
8
Software Installation
Step 3 (Network Configuration Tool):
• During the installation you will be prompted to configure your IP addresses.
First, choose a configuration. (This panel can also be accessed anytime after
installation from the “Launch Pad” menu located at the top-right corner of the
System Director desktop; or, from the following path: D:\Program Files\Avid\ISIS
Storage Manager\.)
1 Gb Ethernet Setup
10 Gb Setup
• Use the populate with defaults button to use the Avid Default Configuration. If
you wish to use your own IP scheme, contact your system administrator.
• Click “OK.” Let the installation finish and quit the installer.
• Remove any USB drives still connected to the system.
Select your network
configuration.
These fields auto-populate
with default IPs if the
“Populate with defaults”
button is pressed.
9
These two fields are reserved
for System Director Resiliency,
see the ISIS 5000 Setup
Guide for more information.
Choose IP Addresses.
Software Installation
Step 4 (Activating the Avid Software License):
• Go to, Start/Programs/Avid/Utilities/Avid License Control.
• Click “Activate” in the Activation tab of Avid License Control window.
• If connected to the Internet, select “I am connected to the Internet and will use
this computer” and click “Continue.”
For additional help or instructions for activating the license without the Internet
please refer to the ISIS 5000 Setup Guide.
• Enter the System ID and Activation ID numbers included with your new
ISIS 5000 and follow the screen prompts to complete the activation.
10
System Configuration
System Configuration
Software Installation
Otros manuales para ISIS 5000
2
Tabla de contenidos
Otros manuales de Cambiar de Avid Technology
