Avid Power ACD306-N Manual de usuario
12V CORDLESS DRILL/DRIVER
SAVE THIS MANUAL
You will need this manual for safety instructions, operating procedures and warranty.
Put this manual and the original sales receipt in a safe dry place for future reference.
Operator's Manual
MODEL: ACD306-N/
ACD306-P
1
IMPORTANT SAFETY INSTRUCTIONS-------------------------------------------P.2
PRECAUTIONS FOR BATTERY CHARGER ------------------------------------P.6
SAFETY PRECAUTIONS FOR DRIL---------------------------------------------- P.7
PRODUCT SPECIFICATION----------------------------------------------------------P.8
CONPONENTS --------------------------------------------------------------------------P.9
PACKAGE INCLUDED ----------------------------------------------------------------P.9
OPERATION ------------------------------------------------------------------------------P.10
ADJUSTMENT ---------------------------------------------------------------------------P.14
MAINTENANCE -------------------------------------------------------------------------P.17
PART LIST --------------------------------------------------------------------------------P.18
SCHEMATIC DRAWING --------------------------------------------------------------P.19
TABLE OF CONTENTS
2
IMPORTANT SAFETY INSTRUCTIONS
1. KEEP THE WORK AREA CLEAN. Clean areas prevent injuries.
2. CONSIDER THE WORK AREA ENVIRONMENT. Don’t use power tools in
damp, wet, or poorly lit locations. Don’t expose your tool to the rain. Keep
the work area well lit. Don’t use tools in the presence of flammable gases or
liquids.
3. KEEP CHILDREN AWAY. All children should be kept away from the work
area. Don’t let them handle machines, tools and extensions cords.
4. STORE UNUSED EQUIPMENT. Store equipment in a dry area to inhibit
rust. The equipment also should be in a high location or locked up to keep
out of the reach of children.
5. DON’T FORCE THE TOOL. It will do the job better and more safely at the
rate for which it was intended.
6. USE THE RIGHT TOOL. Don’t force a small tool or attachment to do the
work of a larger industrial tool. Don’t use a tool for a purpose for which it
was not intended.
WARNING: When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock, and
personal injury. The warnings, cautions, and instructions detailed in this manual
cannot cover all possible conditions and situations that occur.
3
IMPORTANT SAFETY INSTRUCTIONS
7. DRESS PROPERLY. Don’t wear loose clothing or jewelry, they can get
caught in moving parts. Protective, non-electrically conductive gloves and
non-skid footwear are recommended when working. Wear protective hair
covering to contain long hair and keep it from harm.
8. USE EYE PROTECTION. Use a full face mask if the work you’re doing
produces metal filings, dust or wood chips. Goggles are acceptable in other
situations. Wear a clean dust mask if the work involves creating a lot of fine
or coarse dust.
9. DO NOT TOUCH BITS OR BLADES WITH HANDS AFTER USE. They can
become extremely hot after the job is completed.
10. SECURE WORK. Use clamps or a vise to hold the work if possible. It’s
safer than using your hands and it frees both hands to operate the tool.
11. DON’T OVERREACH. Keep proper footing and balance at all times. Do
not reach over or across machines that are running.
12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better
and safer performance.
13. Follow instructions for lubricating and safe performance. Follow
instructions for lubricating and changing accessories. Keep handles dry,
clean and free from oil and grease.
14. REMOVE ALL ADJUSTING KEYS AND WRENCHES. Make it a habit to
check that keys and adjusting wrenches are removed from any rotating tool
4
before using it.
15. AVOID UNINTENTIONAL STARTING. Don’t carry tools with a finger on
the switch. Be sure the direction switch is in the STOP position when not in
use or when changing attachments.
16. STAY ALERT. Watch what you are doing & use common sense. Don’t
operate any tool when you are tired.
17. CHECK FOR DAMAGED PARTS.
1) Before using the tool, any part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended
function.
2) Check for alignment of moving parts, binding of moving parts, breakage
of parts, mountings, and other conditions that may affect its operation.
3) Check bits and blades to make sure they are sharp and not chipped.
Inspect screws and tighten any ones that are loose.
4) Any part that is damaged should be properly repaired or replaced by an
authorized service center unless otherwise indicated elsewhere in the
instruction manual. Have defective switches replaced by an authorized
service center? Don’t use the tool if the switch does not turn on and off
properly.
18. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with
grounded surfaces such as pipes, radiators ranges, and refrigerator
5
PRECAUTIONS FOR BATTERY CHARGER
enclosures. When drilling or cutting into walls, floors, or wherever “live”
electrical wires may be, try to ascertain whether there is a danger of shock.
19. REPLACEMENT PARTS. When servicing, use only identical replacement
parts.
CHARGE BATTERY AT LEAST 6 HOURS before initial use.
1. CHARGE AT ROOM TEMPERATURE. The room temperature must be
higher than 32°F and lower than 104°F.
2. DO NOT CHARGE IF THE CHARGER’S CORD OR PLUG IS DAMAGED.
Charging with a damaged cord may result in a fire or electrical shock. If the
charger is damaged in any way, have it repaired by a qualified serviceman.
3. USE WITH CAUTION, when coming into contact with items that can cause
an electrical short, such as paper clips, nails, the sides of a metal toolbox.
4. DO NOT INCINERATE THE BATTERY. This product has been carefully
engineered and manufactured to give you dependable operation. Please
read this manual thoroughly before operating your new product, as it
contains the information you need to become familiar with its features and
obtain the performance that will bring you continued use for many years.
1. Wear ear protectors when impact drilling. Exposure to noise can cause
SAFETY PRECAUTIONS FOR 12V DRILL
6
hearing loss.
2. Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring.
3. Special Safety Instructions for Battery Pack and Charger. If under extreme
conditions any electrolyte should escape from the battery, it's essential to
avoid contact with skin. If electrolyte does come into contact with your skin,
rinse it off with water. In the event of electrolyte contact with your eyes, it's
essential to consult a doctor.
4. Before the use of the charger and the battery pack, read the instruction
manual for it carefully.
5. During the charging process, the current used should correspond to the
current of the battery charger.
6. Never let moisture, rain or splashed water reach the charging location. The
ambient temperature must not exceed 40℃.
7. Battery packs, which are defective or damaged or can no longer be
recharged, must be disposed of as hazardous waste. Hand them over at a
special collection point. Never harm our environment. Do not throw
unusable battery pack away into the domestic waste, into fire or into water.
8. If the electrical cable is damaged, the wire may only be replaced by the
supplier or by his repair workshop. Have repairs carried out only by an
authorized specialist.
7
9. Use only the battery pack, which has been produced by the original
manufacturer.
10. Always keep the surface of the charger free from dust and dirt.
11. Insert the battery pack into the charger. Follow the guidelines provided
concerning polarity.
12. Always remove battery pack before working on the machine.
13. When the battery pack is outside the drill, cover the contacts to avoid
short circuits (e.g. from tools).
14. Do not throw Li-ion batteries into water or fire, risk of explosion!
15. Protect the battery pack from impacts, and don't open it.
16. Never discharge the battery pack completely and recharge occasionally if
not used for a prolonged period.
Model ACD306
Voltage 12V
Charge Time
Battery Capacity 1.3Ah
Keyless chuck 3/8’’(10mm)
Adjustable Torque Setting 15+1
No Load Speed 0-350RPM/0-1250 RPM
Weight 3.1pounds
Product Dimensions 9.2 x 8.9 x 2.9 inches
PRODUCT SPECIFICATION
3 - 5 Hours
8
1. Keyless chuck
2. Torque settings
3. Variable speed trigger switch
4. Trigger lock
5. Build in work light
6. Gear shifter
7. Rubberized grip
8. Battery pack
9. Battery release tags
A. Charger
B. Charger stand
C. Flexible shaft
D. Extended bar
E. 10pcs drill bits
F. 10pcs driver bit
PACKAGE INCLUDED
TOOL CONPONENTS
9
How to install/remove the battery pack
1. Release battery pack from tool by pressing on both sides of the battery
release tabs and pull downward (Fig.2).
2. To insert battery, align battery and slide battery pack into tool until it locks
into position. Do not force.
(Note: If battery release tabs are cracked or damaged, do not insert into tool.
Battery can fall out during operation.)
1. Cordless drill 3. Release button
2. Battery pack
OPERATION
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Destornillador eléctrico de Avid Power
