Avery Dennison Monarch 9855 Manual de servicio

Monarch®

9855®Printer

Each product and program carries a respective written warranty, the only warranty

on which the customer can rely. Avery Dennison Corp. reserves the right to make

changes in the product, the programs, and their availability at any time and without

notice. Although Avery Dennison Corp. has made every effort to provide complete

and accurate information in this manual, Avery Dennison Corp. shall not be liable

for any omissions or inaccuracies. Any update will be incorporated in a later

edition of this manual.

be reproduced, transmitted, stored in a retrieval system, or translated into any

language in any form by any means, without the prior written permission of Avery

Dennison Corp.

WARNING

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

CANADIAN D.O.C. WARNING

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digital apparatus set out in the Radio Interference Regulations of

the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant

les limites applicables aux appareils numériques de la classe A prescrites dans le

Réglement sur le brouillage radioélectrique édicte par le ministère des

Communications du Canada.

Trademarks

Monarch, 7411, 9825, 9850, 9855, and 9860are trademarks of Avery Dennison Retail Information

Services LLC.

Avery Dennison® is a trademark of Avery Dennison Corp.

HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc.

Hewlett-Packard is a registered trademark of of Hewlett-Packard, Inc.

Centronics is a registered trademark of Centronics Data Computer Corporation.

TrueType is a registered trademark of Apple Computer, Inc.

Other products are trademarks or registered trademarks of their respective countries and are hereby acknowledged.

Avery Dennison Printer Systems Division

170 Monarch Lane

Miamisburg, OH 45342

TABLE OF CONTENTS

GETTING STARTED ..................................................................................... 1-1

Audience................................................................................................ 1-2

Using this Manual ................................................................................... 1-2

Unpacking the Printer.............................................................................. 1-3

Shipping the Printer ............................................................................. 1-3

9445™ Printer Online Emulation............................................................... 1-4

Ordering Programmer's Manuals............................................................... 1-4

About Monarch® MPCL™ Toolbox Utilities................................................. 1-4

Connecting the Power Cable .................................................................... 1-4

Establishing Communications................................................................... 1-5

Connecting the Communication Cable.................................................... 1-5

Using the Control Panel........................................................................... 1-6

Printer Status Lights ............................................................................ 1-6

Button Functions ................................................................................. 1-6

Display ............................................................................................... 1-7

Selecting a Function................................................................................ 1-7

Exiting an Option .................................................................................... 1-8

LOADING SUPPLIES.................................................................................... 2-1

Loading Labels or Tags ........................................................................... 2-2

Loading Labels for the Optional Peel Mode ............................................ 2-6

Using the Optional Tear Bar..................................................................... 2-8

Using Linerless Supply ............................................................................ 2-9

Adding the Peel Edge or Shelf .............................................................. 2-9

Using String Tag Supply ........................................................................ 2-13

String Tag Considerations .................................................................. 2-13

Adjusting the Wide/Narrow Knobs ........................................................... 2-16

Table of Contents i

LOADING RIBBON ....................................................................................... 3-1

Loading Ribbon....................................................................................... 3-2

Using a High Energy Ribbon .................................................................... 3-4

High Energy Ribbon Limitations............................................................. 3-5

SETTING SUPPLY OPTIONS......................................................................... 4-1

Setting the Supply Type........................................................................... 4-3

Setting the Ribbon .................................................................................. 4-4

Setting the Speed ................................................................................... 4-5

Setting the Feed Mode ............................................................................ 4-6

Setting the Backfeed ............................................................................... 4-7

Changing the Position Settings................................................................. 4-8

Setting the Print Position...................................................................... 4-8

Setting the Supply Position................................................................. 4-10

Setting the Margin Position................................................................. 4-11

Setting the Cut Position...................................................................... 4-12

Setting the Dispense Position ............................................................. 4-12

Setting the Backfeed Distance ............................................................ 4-13

Using Batch Separators ......................................................................... 4-14

Using Skip Index................................................................................... 4-15

Setting the Knife Control........................................................................ 4-16

Setting the Error Action ......................................................................... 4-17

Setting the Print Contrast ...................................................................... 4-20

Enabling the Verifier ............................................................................. 4-22

ii Operator's Handbook

SETTING COMMUNICATIONS ....................................................................... 5-1

Setting the Baud Rate ............................................................................. 5-2

Setting the Word Length .......................................................................... 5-2

Setting the Stop Bits ............................................................................... 5-3

Setting the Parity .................................................................................... 5-3

Setting the Flow Control .......................................................................... 5-4

Resetting to Default Values...................................................................... 5-4

Using Parallel Communications ................................................................ 5-5

Setting the Port ................................................................................... 5-5

Setting the Mode ................................................................................. 5-6

SETTING DEFAULTS.................................................................................... 6-1

Setting the Monetary Sign........................................................................ 6-3

Setting the Secondary Sign...................................................................... 6-4

Setting the Number of Decimal Places ...................................................... 6-5

Setting the Slashed Zero Appearance ....................................................... 6-5

Setting the Power-Up Mode...................................................................... 6-6

Changing the Prompt Set ......................................................................... 6-6

Using Flash Storage................................................................................ 6-7

Disabling Image Errors ............................................................................ 6-8

Ignoring Configuration Packets................................................................. 6-9

Using Flash Memory.............................................................................. 6-10

Formatting Flash Memory ................................................................... 6-10

Checking Available Flash Memory ....................................................... 6-11

Packing Flash Memory ....................................................................... 6-12

Memory Guidelines ............................................................................... 6-13

Setting Batch Options............................................................................ 6-14

Setting Up the Network Printer ............................................................... 6-14

Setting Up the RFID Printer ................................................................... 6-14

Table of Contents iii

USING SCRIPTS .......................................................................................... 7-1

Initial Script Startup Procedures ............................................................... 7-2

Viewing Script Information ....................................................................... 7-2

Downloading a Script .............................................................................. 7-3

Enabling a Script .................................................................................... 7-4

Deleting a Script ..................................................................................... 7-5

Enabling Status Polling............................................................................ 7-6

Using Immediate Commands .................................................................... 7-7

PRINTING ................................................................................................... 8-1

Printing.................................................................................................. 8-1

On-Demand Mode Printing ....................................................................... 8-2

Printing an Error Label ......................................................................... 8-2

Pausing a Batch...................................................................................... 8-3

Restarting a Batch .................................................................................. 8-3

Canceling a Paused Batch ....................................................................... 8-4

Repeating a Batch................................................................................... 8-6

Offline Printing ....................................................................................... 8-6

Special Printing Considerations................................................................ 8-7

Printing TrueType® Fonts ........................................................................ 8-8

Licensing Your Fonts............................................................................... 8-8

CARE & MAINTENANCE............................................................................... 9-1

Clearing Label Jams................................................................................ 9-1

Cleaning ................................................................................................ 9-1

Replacing the Printhead .......................................................................... 9-5

iv Operator's Handbook

DIAGNOSTICS & TROUBLESHOOTING ....................................................... 10-1

Factory Set Password............................................................................ 10-1

Checking the Software Version............................................................... 10-1

Printing a Test Label ............................................................................. 10-2

Checking Supply Quality........................................................................ 10-3

Using Password Protection .................................................................... 10-4

Enabling the Password (System Administrators only)............................. 10-4

Service Diagnostics............................................................................... 10-5

Troubleshooting.................................................................................... 10-6

Error Messages .................................................................................... 10-7

Common Errors..................................................................................... 10-8

SPECIFCATIONS .........................................................................................A-1

Printer ...................................................................................................A-1

Tag Cut Dimensions.............................................................................A-2

Supplies.................................................................................................A-3

Linerless Supplies ...............................................................................A-4

String Tag Supplies.................................................................................A-4

Ribbon Specification ...............................................................................A-5

About Ribbons.....................................................................................A-5

Cable Pinouts......................................................................................A-6

Table of Contents v

ACCESSORIES & OPTIONS..........................................................................B-1

Accessories............................................................................................B-1

Packaging Materials.............................................................................B-2

Factory-Installed Options.........................................................................B-2

Ethernet Information ............................................................................B-3

RF Information ....................................................................................B-3

GLOSSARY ................................................................................................ G-1

INDEX............................................................................................................ 1

vi Operator's Handbook

GETTING STARTED

The Monarch® 9855® printer lets you print text, graphics, and bar

codes on thermal transfer (ribbon) and thermal direct labels or tags. The

9855 printer prints labels continuously (in one strip) or on-demand (one label

at a time).

You can print on aperture, die cut, black mark, or continuous (non-indexed)

supplies. Continuous supply must be used in continuous mode. See

"Supply Type" in Chapter 4 for more information about the supply types.

This chapter includes information about

♦ unpacking the printer

♦ connecting the power cord

♦ connecting the communication cable

♦ using the printer's control panel.

Several chapters of this manual have one or more charts showing the

printer's menu structure. For example:

Main Menu

Cancel All Print Mode Batch Entry Repeat

Batch

Options

Setup Scripts Diagnostics

Supply

Contrast

Defaults

Network

Port

Settings

Flash

Memory

Verifier

RFID

The black boxes show where you are; the bordered boxes show how you got

there.

Refer to the MonarchNet2™ Operating Instructions for information about the

Network menu.

Refer to the Multi-Protocol Application Notes for information about the RFID

menu.

Getting Started 1-1

Audience

The Operator's Handbook is for the person who prints and applies labels.

Using this Manual

Following is a summary of the contents of this manual.

Chapter Contents

1 Getting Started Contains information about connecting the power

cable and using the control panel.

2 Loading

Supplies

Describes how to load a roll of supply, fan-fold

supply, and tag supply.

3 Loading Ribbon Describes how to load a roll of ribbon and lists high-

energy ribbon information.

4 Setting Supply

Options

Using the Supply menu to set the various supply

options (supply, ribbon, feed mode, etc.).

5 Setting

Communication

Values

Using the Port Settings menu to set the serial and

parallel communication values (baud rate, parity,

etc.).

6 Setting Defaults Using the Defaults menu to set the monetary sign,

number of decimal places, prompt set, etc.

7 Using Scripts Using the Scripts menu to load a script, enable a

script, delete a script, etc.

8 Printing Explains how to print labels and use the Pause menu.

9 Care &

Maintenance

Describes how to clear a label jam, clean the printer,

and replace the printhead.

10 Diagnostics &

Troubleshooting

Describes how to print a test label and lists common

problems and their solutions.

A Specifications Contains printer and supply specifications.

B Accessories &

Options

Contains printer accessories and optional equipment.

1-2 Operator's Handbook

Otros manuales para Monarch 9855

Tabla de contenidos

Otros manuales de Impresora de Avery Dennison

Avery Dennison

Avery Dennison FreshMarx 9417 Manual de usuario

Avery Dennison

Avery Dennison Monarch 9825 Manual de usuario

Avery Dennison

Avery Dennison AP4.4 Guía de solución de problemas

Avery Dennison

Avery Dennison APP 31x Manual de usuario

Avery Dennison

Avery Dennison SNAP 500 Manual de usuario

Avery Dennison

Avery Dennison Monarch 9825 Manual de servicio

Avery Dennison

Avery Dennison AP5.4 Manual de usuario

Avery Dennison

Avery Dennison SNAP 500 Manual de usuario

Avery Dennison

Avery Dennison Monarch 9419 Manual de usuario

Avery Dennison

Avery Dennison LOKPRINT 676 Manual de usuario

Avery Dennison

Avery Dennison Monarch 9906 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6140 Manual de usuario

Avery Dennison

Avery Dennison Monarch 9419 Manual de usuario

Avery Dennison

Avery Dennison Monarch Sierra Sport2 Manual de servicio

Avery Dennison

Avery Dennison Stacker Monarch 932TM Manual de usuario

Avery Dennison

Avery Dennison Monarch Pathfinder Ultra Platinum 6039 Manual de usuario

Avery Dennison

Avery Dennison TrafficJet Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6059 Manual de servicio

Avery Dennison

Avery Dennison MONARCH 9416 XL Manual de usuario

Avery Dennison

Avery Dennison Monarch SIERRA SPORT4 9493 Manual de usuario

Avery Dennison

Avery Dennison MONARCH 9416 XL Documento técnico

Avery Dennison

Avery Dennison 9688 Manual de usuario

Avery Dennison

Avery Dennison M09416 TTXLI Manual de usuario

Avery Dennison

Avery Dennison Monarch 9854 Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario