Avenview HBT-C6POEWP-RB Manual de usuario
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
AV Connectivity, Distribution And Beyond...
HDBaseT HDMI Wall Plate Receiver
IR/RS232/POE 100M
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: HBT-C6POEWP-RB
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
2.1 PACKAGE CONTENTS .....................................................................................................................4
2.2 BEFORE INSTALLATION...................................................................................................................5
2.2 CABLE SPECIFICATIONS ..................................................................................................................5
2.3 APPLICATION DIAGRAM..................................................................................................................6
2.4 PANEL DESCRIPTION.......................................................................................................................7
2.4.1 INPUT PANEL (HBT-C6POEWP-SB) FRONT PANEL .....................................................................7
2.4.2 INPUT PANEL (HBT-C6POEWP-SB) Rear Panel .....................................................................7
3. INSTALLATION (HBT-C6POEWP-SB)..............................................................................................8
4. IR CABLE DEFINITION......................................................................................................................9
5. GENERAL TROUBLESHOOTING...................................................................................................10
6. SPECIFICATIONS.............................................................................................................................11
NOTICE.................................................................................................................................12
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The HBT-C6POEWP-R HDBaseT HDMI Wall plate Receiver has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the HBT-C6POEWP-R
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk
of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
The Avenview HBT-C6POEWP-RBHDBaseT HDMI wall plate receiver was developed to simplify the install and also
create a clean seamless look with the decor. Accepts the transmitted HDMI signal over Single CAT5e/6 from the TX of
uncompressed audio/video, data control through the built-in RS-232 and IR ports. No need to power this unit because
the TX wall plate supplies Power on Ethernet (PoE) over the CAT5/6 to this Receiver wall plate extending all signals up to
100m to the display screen. With this unique wall plate design integration within your solution has never been this simple.
Video Signals - Supports Full HD 1080p up to 3D, 2K (2160 x 1440), UHD (3840 x 2160)
Audio Signals - Pass-through up to LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
Data Signals - RS-232 and bi directional IR IN and IR OUT ports
The HBT-C6POEWP-RBincludes one unit: A 2 Gang Wall plate HDBaseT HDMI Receiver with one (1) HDMI Input and one
(1) HDBaseT RJ45 module Output.
Features
- HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant
- HDCP repeater and CEC bypass
- Receive uncompressed data signals over a single CAT6 or CAT5e cable Up to 100M/328ft
- Video: Uncompressed video 1080p, 60Hz, 36bits
- Audio up to 7.1CH & Dolby TrueHD, DTS-HD
- HDBaseT 4Play™ convergence: HDMI, POE & Control (IR & RS232)
This system was tested with CAT6A (625MHz), 4-Pair, U/UTP-Unshielded cable, so if using Category cables of another type,
results may vary.
- NOTE: The PoE function is designed for powering compatible Receiver units only. The non-PoE Receivers has to be powered
with a power supply. Transmitters (Tx) from different manufactures would not be compatible. Displaying HDMI 4Kx2K resolution
would require the standard 4Kx2K HDMI cable and display for accurate results
www.avenview.com Page 4
2.1 PACKAGE CONTENTS
Before you start the installation of the HDMI Extender, please check the package contents.
1HBT-C6POEWP-RB X 1
2
IR EXTENDER
IR BLASTER
3.5 TO RS-232 FEMALE CABLE
3.5 TO RS-232 MALE CABLE
USER’S MANUAL
www.avenview.com Page 5
2.2 BEFORE INSTALLATION
•Put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components
within the casing.
•Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.
•Use the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this
may result in malfunction of the unit and may cause fire.
•Do not twist or pull by force the ends of the UTP cable. It will cause malfunction.
2.2 CABLE SPECIFICATIONS
We highly recommend achieving best results with our HBT-C6POEWP-RByou acquire a high quality 26 or 24 AWG HDMI
cable with the below specifications to maintain signal integrity and distances.
Features
•Length: 5m (16ft) to 15m (50ft)
•Bandwidth: 10.2 Gbps data transfer rate
•Supports Resolution: Up to 3840x2160 @ 24Hz and 4096x2160 @ 24Hz, 1080p @ 24Hz / 50/60Hz/3D
•Conductor gauge: 26 / 24 AWG
•Deep Color
•3D Capable
•CEC
•Ethernet Channel
•Audio Return Channel
•Connector 1: HDMI (Type A) Male
•Connector 2: HDMI (Type A) Male
www.avenview.com Page 6
2.3 APPLICATION DIAGRAM
www.avenview.com Page 7
2.4 PANEL DESCRIPTION
2.4.1 INPUT PANEL (HBT-C6POEWP-RB) Front Panel
1. RS-232 OUT: Connect using the 3.5mm jack to RS232 Cable to devices that receives RS232 Commands
2. IR 1 IN: Connect the IR Receiver cable included to receive IR Signal.
3. IR 2 OUT: Connect the IR blaster cable included to transmit IR Signal.
4. HDMI OUT: Connect with HDMI male cable to display audio/video signal to screen
5. Power LED: Green LED will illuminate when the supplied power supply is attached.
6. LINK LED: Yellow LED will illuminate when input and output signal is detected over the CAT5/6 cable when
attached
2.4.2 INPUT PANEL (HBT-C6POEWP-RB) Rear Panel
7. CAT5/6 IN: Connect to a compatible Transmitter unit to receive video/audio/data signals
1
5
6
2 3 4
7
Tabla de contenidos
Otros manuales de Receptor de Avenview
Avenview
Avenview W-HDM3D5G-50M Manual de usuario
Avenview
Avenview HDMI-C5-R-M Manual de usuario
Avenview
Avenview FO-4LC-xxM Series Manual de usuario
Avenview
Avenview HDMI-C5 Series Manual de usuario
Avenview
Avenview HDM-C5-R-M Manual de usuario
Avenview
Avenview VGA-C5A-R Manual de usuario
Avenview
Avenview HBT-C6POEWP-R Manual de usuario
Avenview
Avenview W-HDM3D5G-20M Manual de usuario
Avenview
Avenview VGA-C5-16 Manual de usuario
Avenview
Avenview VGA-C5-4 Manual de usuario
