Aventura CAM-IPM-13X-DNPC Manual de usuario
Network Camera
Installation Manual
V4.0.1
Installation Manual of Network Camera
1
Thank you for purchasing our product. If there are any questions, or requests, please do not
hesitate to contact the dealer.
There is a variety of network cameras in our company. Installation instructions of these cameras are
listed in this manual. Find the model of your camera in the following list. Then according to the
structure Type on the left of your camera Model, you can find corresponding chapter for
instructions of your camera.
Type
Model
Box Camera I
CAM-IPM-13X-DNPC, CAM-IPM-2X-DNP
Box Camera II
CAM-IPM-2X-DNPC
Box camera III
CAM-IPM-3X-DNP
CAM-IP-5X-WDR
CAM-IPM-5X-DNP
Dome I
CAM-IPM-2D-31P-VP
CAM-IPM-13D-31P-VPC
Dome camera II
CAM-IPM-5D-41P-VP
CAM-IPM-3D-29P-VP
CAM-IPM-2D-29P-WDR
CAM-IPM-2D-29P-WDRI
CAM-IPM-03D-21VP
CAM-IPM-03D-21IR-VP
Bullet Camera
CAM-IPM-2B-29IR
CAM-IPM-3B-29IR
Mini Dome Camera
CAM-IPM-2D3-VP
CAM-IPM-D3-VP
This manual may contain several technically incorrect places or printing errors, and the content is
subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined
in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”
Installation Manual of Network Camera
2
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precautionary measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
Please adopt a power adapter which can meet the safety extra low voltage (SELV) standard. And
source with DC 12V or AC 24V (depending on models) according to the IEC60950-1 and Limited
Power Source standard.
If the product does not work properly, please contact your dealer or the nearest service center.
Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.
This installation should be made by a qualified service person and should conform to all the
local codes.
Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera is
fixed to the ceiling.
Installation Manual of Network Camera
3
Cautions:
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit
of ethanol and wipe it gently. If the camera will not be used for an extended period of time, put
on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp. The strong
light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is being used,
make sure that the surface of the sensor is not exposed to the laser beam.
Do not place the camera in extremely hot or cold temperatures (the operating temperature
should be between -10°C ~ 60°C), dusty or damp environment, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating environment.
Keep out of water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion. Please use the
manufacturer recommended battery type.
Installation Manual of Network Camera
4
Table of Contents
CHAPTER 1 INTRODUCTION .................................................................................................................................... 1
1.1 APPLICATIONS .......................................................................................................................................................... 1
1.2 PREPARATIONS.......................................................................................................................................................... 1
CHAPTER 2 BOX CAMERA INSTALLATION................................................................................................................. 1
2.1 APPEARANCE DESCRIPTION ......................................................................................................................................... 1
2.1.1 Box Camera I .................................................................................................................................................... 1
2.1.2 Box Camera II ................................................................................................................................................... 3
2.1.3 Box Camera III .................................................................................................................................................. 5
2.2 INSTALLATION ........................................................................................................................................................... 8
CHAPTER 3 DOME CAMERA INSTALLATION ............................................................................................................10
3.1 DOME CAMERA I .................................................................................................................................................... 10
3.1.1 Appearance Description ................................................................................................................................. 10
3.1.2 Installation ..................................................................................................................................................... 12
3.2 DOME CAMERA II ................................................................................................................................................... 15
3.2.1 Appearance Description ................................................................................................................................. 15
3.2.2 Installation ..................................................................................................................................................... 17
CHAPTER 4 BULLET CAMERA INSTALLATION...........................................................................................................23
4.1 APPEARANCE DESCRIPTION ....................................................................................................................................... 23
4.2 INSTALLATION ......................................................................................................................................................... 25
CHAPTER 5 MINI DOME CAMERA INSTALLATION....................................................................................................28
5.1 APPEARANCE DESCRIPTION ....................................................................................................................................... 28
5.2 INSTALLATION ......................................................................................................................................................... 30
Installation Manual of Network Camera
1
Chapter 1 Introduction
The network camera is a kind of embedded digital surveillance product that combines the features
of both a traditional analog camera and a net DVS (Digital Video Server). With a built-in video server,
the network camera is capable of providing real-time video stream compression, processing, video
analysis and transmission simultaneously. Applying the latest processing chip and hardware
platform, the network camera can be widely applied to various surveillance and image processing
systems with high reliability and stability.
1.1 Applications
This camera can be adopted for network video surveillance systems, e.g.:
Network surveillance for over-the-counter activities in the banks, ATMs, supermarkets and
factories.
Remote surveillance systems for nursing homes, kindergartens and schools.
Artificially Intelligent access control systems .
Artificially Intelligent office building/residential compounds management systems.
Unguarded power station and telecommunication base station surveillance systems.
Pipelining and warehousing monitoring systems.
Surveillance systems for airports, railway stations, bus stops, etc.
1.2 Preparations
Before you start:
Verify the package contents are correct by checking the items against the packing list.
Read the following contents carefully before installation.
Make sure that all the related equipment is powered off during installation.
Check whether the power supply is matched with your AC outlet to avoid damage.
Do not place the camera in extremely hot or damp environment. To avoid heat
accumulation, good ventilation of the operating environment is required.
If the product does not function properly, please contact your dealer or the nearest service
center. Do not disassemble the camera for repair or maintenance by yourself.
Installation Manual of Network Camera
1
Chapter 2 Box Camera Installation
2.1 Appearance Description
2.1.1 Box Camera I
Camera description:
Figure 2-1 Overview
Table 2-1 Description
No.
Description
1
CS Lens mount
2
Back focus ring
3
Auto-iris interface
4
10M/100M self-adaptive Ethernet interface
5
AUDIO IN: Audio input interface
AUDIO OUT: Audio output interface
6
SD: SD card slot
7
VIDEO OUT: Video output interface
8
Power supply interface
9
PWR: Power LED indicator
10
D+, D-: RS-485 interface
11
Ground
12
1A, 1B: Alarm output interface
13
IN, G: Alarm input interface
Installation Manual of Network Camera
2
Note: The type of auto-iris interface is shown in Figure 2-2, and the definition of each pin is shown
below in Table 2-2:
Figure 2-2 Auto-iris Interface
Table 2-2 Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera wiring Diagram:
Figure 2-3 Wiring Diagram
Installation Manual of Network Camera
3
2.1.2 Box Camera II
Camera description:
Figure 2-4 Overview
Figure 2-5 Overview
Table 2-3 Description
No.
Description
1
CS Lens mount
2
Auto-iris interface
3
Bracket mounting holes
4
F1+ F1-, F2+ F2- ,F3+ F3-: Alarm output interface
5
T1,T2,T3, T4,GND: Alarm input interface
6
D+, D-: RS-485 interface
7
10M/100M self-adaptive Ethernet interface
8
VIDEO OUT/HDMI: Video output interface
9
RESET: Reset button
10
TXD, RXD, GND: RS-232 interface
Installation Manual of Network Camera
4
11
Power supply interface
12
POWER: Power LED indicator
13
SD: SD card slot
14
AUDIO IN: Audio input interface
15
AUDIO OUT: Audio output interface
16
Ground
Notes:
After powering the camera on, pressing and holding the RESET button for about 10 seconds can
reset all the parameters to the default settings.
The type of auto-iris interface is shown in Figure 2-6, and the definition of each pin is shown
below:
Figure 2-6 Auto-iris Interface
Table 2-4 Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Otros manuales para CAM-IPM-13X-DNPC
1
Este manual sirve para los siguientes modelos
17
Tabla de contenidos
Otros manuales de Cámara de seguridad de Aventura
Aventura
Aventura CAM-IPM-1Z-18X-DN Manual de usuario
Aventura
Aventura CAM-HS-605HB Manual de usuario
Aventura
Aventura CAM-HS-605HB Manual de usuario
Aventura
Aventura CAM-7X-WDR Manual de usuario
Aventura
Aventura CAM-7D-21IR-WDR Manual de usuario
Aventura
Aventura CAM-5Z-27X Manual de instrucciones
Aventura
Aventura CAM-IPM-13X-DNPC Manual de usuario
Aventura
Aventura CAM-AHY-2B-212V-IR Instrucciones de funcionamiento y mantenimiento
Aventura
Aventura CAM-IPR Series Manual de usuario
Aventura
Aventura CAM-IPM-5D-41P-VP Guía del usuario
