Safety Check Before Each Ride
Always check the condition of your bike before youride in addition to havingregular maintenance
performed. If youare unsure of howto conduct acomplete check of the condition ofyour bike before every
ride, you should consult a certified, reputable bike mechanic for assistance.
Electrical System (Applicable to Pace 500, Pace 350, Sinch, Level, Aventure)
and user preferences.It iscritical that you familiarize yourself with all aspectsof your ebike selectrical
system and check to see if it isworkingcorrectly before every ride. The front and rear brake leverscontain
should be checked for correct operation. The throttle shouldprovide smooth acceleration when gradually
intermittently, or not working, please discontinue the use ofyour ebike immediately and contact the
Aventon Support team for assistance.
Brakes
Ensure that the brakes andtheir system components are free from damage, properly securedand working
correctly. When fully squeezed, both front andrear brake levers shouldnot be touchingthe handlebar. Take
your bike to a certified, reputable bike mechanic to have the brakes repairedifyou findaproblem.
Tires andWheels
Your wheels should always spin straight and must be repaired or replacedifthey wobble side to side or up
and down when spinning. If your wheels become untrue or spokes loosen, which can happen with normal
use, we recommend that a certified, reputable bike mechanic performs all wheel tuning and truing
operations on your bike from Aventon. Do not attempt to true wheelsor tighten spokes unless youhave
adequate knowledge, tools, and experience. Ensure the tires and inner tubes are in goodworkingcondition
without any visual damage and have the correct amount of air pressure. Always replace tires and inner
tubeswith punctures,cuts,or damage before youride. Tires without the correct amount of air pressure can
reduce performance, increase tire andcomponent wear, and make ridingyour bike unsafe.
Accessories, Straps, and Hardware
Ensure all hardware is securedandall approved accessoriesare properly attachedper the specific
component manufacturer s instructions. It is goodpractice to look over all hardware, straps, and accesso-
ries before each ride andifyoudo discover something wrongor somethingthat you are not sure about,
have it checked by a certified, reputable bike mechanic.
Suspension, Handlebar, Grips, and Seat Adjustments
before use. The suspension fork should be properly adjustedaccordingto your weight and terrain. Ensure
the handlebar and handlebar stem are properly aligned, fittedto the user, and securedto their recommend-
ed torque values. Handlebar grips should not move easily on the handlebar end. Loose, worn,or damaged
handlebar grips shouldbe replaced before you ride. The seat and seatpost shouldbe properly aligned,
fitted to the user, and the seatpost quick release should be properly tightened, fully closed, and secured
before riding.
03
The replacement of original components or installation of third-party accessories or accessories
not from Aventon explicitly recommended for your bike model is atyour own risk. Using
aftermarket accessories or components thathavenot been tested by Aventon for safety and
compatibility may void your warranty, create an unsaferiding condition, damage property or
your bike by Aventon, or result inserious injury or death.
’
’
’
