Avaya IP Office 9608 Manual de usuario

AVAYA 9608 & 9611G IP DESKPHONE INSTRUCTIONS

9608 & 9611G IP PHONE OVERVIEW

MESSAGE WAITING

INDICATOR

If there are new messages in your Voice Mailbox, the light on the top right corner of your telephone will be lit solid red. In

addition, the Message button will also be lit. The lights will turn off once you have listened to your new messages.

PHONE DISPLAY

The display contains the following information:

The top line shows your extension number as well as the date and the time.

If you have missed calls, the left hand side of the top line will display the missed call icon and the number of calls

you have missed. Your HISTORY button will also be lit.

The Prompt Line will display prompts to help you navigate through extra features on your telephone.

The Line button area alternates between the extension lines you use to place and receive calls and the features

that are programmed on your telephone.

The line buttons include LED lights which will show a green light when a line or feature is active.

The bottom of the display screen is the softkey area. When the phone is idle, you will see at minimum a Redial

option. While on a call, the softkey features will include: Hold, Conf, Transfer, and End Call

NAVIGATION ARROWS

and the

OK BUTTON

Up and Down Navigation Arrows: Use the Up and Down Navigation arrows to move from one line or page to another.

Right and Left Navigation Arrows: Use the Right and Left Navigation arrows to navigate between feature menus and

screens.

OK Button: Press the OK button for a shortcut to an action. For example, when you select a history entry, OK will dial the

number for you.

PHONE BUTTON

Use the Phone button to navigate back to the main phone screen. This may have been referred to as the Exit or Phone/Exit

button on your previous phone.

MESSAGE BUTTON

Press the MESSAGE button to connect directly to the voice mail system. You will be prompted to enter your security code to

access your mailbox.

CONTACTS

Press CONTACTS to view the entries in your Contacts list.

HISTORY

Press HISTORY to view the log of all your calls.

HOME

Press HOME to configure your phone’s Options and Settings.

HEADSET

Press HEADSET to use the headset, if one is connected (only HIS headset cords are compatible with the 9608 and 9611G

phones).

SPEAKER

Press SPEAKER to use the two-way speakerphone. To take a call off speakerphone, lift the handset.

VOLUME BUTTON

Press the VOLUME button to adjust the volume of the handset, headset, speaker, or ringer.

MUTE BUTTON

Press the MUTE button so the other party cannot hear you. The MUTE button will be lit when your call is muted. To

reinstate two-way conversation, press the MUTE button again. The light will clear.

USING YOUR PHONE

Your phone must be logged in with a valid extension in order to receive calls. If the phone is not logged in, you will see a

prompt to "Enter Username" on the display.

1. Enter your 5-digit extension as the Username, and then press the ‘OK’ button.

2. The cursor will then move into the "Password" field. Enter the password and then press the ‘OK’ button.

If you need to retrieve the password, contact the UW Technology Service Center at help@uw.edu or 206.221.5000. Note,

this password is not the same as the security code used to access your voice mailbox.

PLACING A CALL

Place a call in any of the following ways:

A. Lift the handset and dial the number

B. If you are using a headset, press the HEADSET button and dial the number

C. If you are using the speakerphone, press the SPEAKER button and dial the number

ANSWERING A CALL

When an incoming call rings to your extension, the Bell icon will appear on the top line of your display. The call information

will display on the ringing line appearance.

To Answer an Incoming Call:

A. Lift the handset

B. If you are using a headset, press the HEADSET button

C. To use the speakerphone, press the SPEAKER button

To Answer an Additional Incoming Call:

Press the Ans Hold softkey to automatically place the current call on hold when you answer the new call.

Alternatively, press Ans Drop to automatically drop the current call when you answer the new call.

ENDING A CALL

To End a Call

A. Hang up the handset

B. If you are using a headset, press the HEADSET button

C. If you are using the speakerphone, press the SPEAKER button

REDIAL

(The Redial button will display after

you have made a call)

Using Redial

Press the Redial softkey to call the last dialed number

HOLD

Placing a Call on Hold

Press the Hold softkey

(The green light next to the line button flashes when the call is holding and the hold icon appears on your display.)

Retrieving the Held Call

Press the Resume softkey to retrieve the call

TRANSFER

Sends a call from your extension

to another extension.

To Transfer a Call

1. During a call, press the Transfer softkey on the bottom of the display

(The call is automatically put on hold and the next available line becomes active)

2. Dial the number to which you want to transfer the call

3. Press the Complete softkey on the bottom of the display or the OK button to complete the transfer

(To stop the transfer and return to the caller, press the Cancel softkey or press the line appearance holding the original call.)

CONFERENCE

The Conference feature allows

you to conference you and up to

five other parties on a call.

Setting up a Conference Call

1. While on the current call, press the Conf softkey (The call is automatically on hold and the next available line becomes active.)

2. Dial the number of the next party

3. Once the next party answers, press the Join softkey or the OK button to add the new party to the call

4. Press the Add and repeat these steps to include additional parties on the conference call as needed (max. of six parties)

Using the Conference Button to Add A Held Call to An Active Call

1. While on an active call, press the Conf softkey (or Add if you are already in a conference)

2. Select the call on hold that you want to add to the conference

3. Press the softkey below Join (You have successfully added two calls together)

Drop the Last Person Added to the Conference Call

Press the Drop softkey. The last party connected to the conference call is dropped from the call

CALL FORWARDING

Forward all of your calls to

another number

Activate Call Forwarding

1. Dial [*][7][2]

2. When you hear dial tone, enter the 5-digit extension number where calls should be forwarded to. To forward to an

off-campus number within the Greater Seattle Area, dial 9 + area code + 7-digit number

Cancel Call Forwarding

Dial [*][7][3]

To have a Call Forward button programmed on your phone, contact the UW Technology Service Center at [email protected]

SEND ALL CALLS

Immediately sends all your calls

to your voice mail box

Activating and Deactivating Send All Calls

1. Press the Send All button. A checkmark will appear next to the feature and the Send Calls icon will appear in the

top left corner of your display

2. Press Send All button again to turn this feature off

CONTACTS

The telephone allows you to

store up to 250 names and up to

6 different telephone numbers

per name.

Adding a New Contact

1. Press the CONTACTS button

2. Press the New softkey

3. Use the down Navigation Arrows to scroll through the appropriate fields

4. Use your dial pad to enter alpha-numeric text within each field

5. When finished, press the Save softkey or the OK button

Example: Pressing the “2” on your dial pad displays the letter “A.” Pressing the “2” key again replaces the “A” with a “B,”

pressing it again replaces the “B” with a “C” and pressing it again replaces the “C” with a “2.” Pressing it again re-displays

the letter “A,” and so on. Pause before entering the next character if the characters are on the same key. If you want to

remove a letter, number, space, or symbol that is in the middle of the text you entered, use the left and right navigation

arrows to place your cursor after the character you want to remove. Once your cursor is in the correct position, press Bksp

to remove the character to the left of the cursor.

Press the softkeys below More >Abc to change between upper and lower case letters or to enter numbers

Press the softkeys below More >Symbols to enter characters that are not on your dial pad

Searching for and Calling a Contact

1. Press the CONTACTS button to display the Contacts screen

2. Select the contact you want to view

3. Press the Call softkey or OK button to call that person or the Details softkey to view that contact

Editing a Contact

1. Press the CONTACTS button

2. Select the contact entry you wish to edit

3. Press the softkeys below More >Edit

4. Choose the field you want to edit

5. Use the dial pad and softkeys to make changes to the contact information

6. Press the Save softkey or OK button

Deleting a Contact

1. Press the CONTACTS button

2. Select the contact entry you wish to delete

3. Press the Delete softkey

4. Press Delete again or the OK button to confirm; press Cancel to retain the entry

HISTORY

You can use HISTORY to view a

list of your recent calls, or

separate lists of your incoming,

outgoing, or missed calls.

Adding an Entry from the Call Log to your Contacts List

1. Press the HISTORY button

2. Select the entry you want to add to your Contacts list

3. Press the +Contact button

4. Using your dial pad, edit the name and other preferences as needed

5. Press Save

Viewing Call History

1. Press the HISTORY button

2. Scroll to the right or left to view separate lists of All Calls, Missed, Answered, and Outgoing calls

3. Press Details to view the selected call’s information

4. Press the Back softkey to return to the list view

TIP: You can scroll quickly to the top of the list by pressing HISTORY again.

Calling a Person from the Call History Log

1. Press the HISTORY button

2. Scroll to select the person or number you want to call

3. Press the Call softkey or the OK button

Removing an Entry from the Call History Log

1. From the HISTORY screen, select the entry you wish to delete

2. Press the More softkey

3. Press the Delete softkey

4. Press Delete again or the OK button to confirm; press No to retain the entry

Clearing all Entries from Call History

1. From the HISTORY screen, select the entry you wish to delete

2. Select the list you want to delete. (All Calls list, Outgoing Calls list etc.)

3. Press the More softkey to locate the Clear All softkey

4. Press the Clear All softkey to delete all of the entries in the list you are viewing

5. Press Yes or the OK button to confirm; press No to retain the entry

TURNING OFF CALL

HISTORY

You can turn call history on or

off. If you have bridged call

appearances on your phone, you

can choose whether or not to

include calls to your bridged

lines in your call log.

Turning off Call History

1. Press the HOME button

2. Select Options & Settings or Phone Settings

3. Press Select or the OK button

4. Select Application Settings

5. Press Select or the OK button

6. Select the type of call logging you want to turn off (e.g., turn logging off all call history or the logging of bridged

lines)

7. Press Change or OK button

8. Press Save

EXTENSION TO CELLULAR

(EC500)

Configuring simultaneous ringing

for multiple telephones

The EC500 feature allows you to have incoming calls to your desk phone ring on your office telephone and your cell phone

at the same time. This allows you to answer office calls while you are away from your desk. The cell phone number is

programmed by your system administrator.

1. From the Phone screen, scroll right to access the Features menu

2. Select EC500

3. Press OK to turn simultaneous ringing on or off

PRESS THE HOME BUTTON TO VIEW AND CHANGE COMMON OPTIONS & SETTINGS

CALL SETTINGS

Press the HOME button.

Press the Select softkey under

Options and Settings. Next, press

the Select softkey under Call

Settings.

Use the Navigation Arrows to

highlight the feature and press

the Change softkey or the OK

button to select.

Press Save to keep your changes.

Go to Phone Screen on Calling or on Ringing

Set this feature to take you back to the main phone screen when placing, receiving, or answering an incoming call.

Display Call Timers

By setting this feature to “Yes,” you can turn the call timer on for each call you receive or answer.

Redial

Set Redial to dial the last number you dialed or to display a list of the last numbers you dialed.

Visual Alerting

When set to “On,” the Voice Mail Indicator on the top right of the phone will flash each time your phone rings.

APPLICATION OPTIONS

Press the HOME button.

Press the Select softkey under

Options and Settings. Use the

Navigation Arrows to scroll to

Application Settings and press the

Select softkey.

To change a menu option, use the

Navigation Arrows to highlight

the feature.

History

When set to “On,” your phone will retain the History of all calls including bridged call appearances.

Log Bridged Calls

When set to “Yes,” you can view the history of all calls to your bridged extension.

Personalize Button Labels –up to 13 characters

1. Select Personalize Labels

2. Press Change or OK

3. Using the Navigation Arrows, scroll to the feature button you wish to label and select the label to edit

4. Press Edit

5. Using your dial pad, edit the label.

6. Press Clear to clear all fields and start over.

7. Press Save

Restore Default Button Labels

You may revert back to the system default button labels by pressing the HOME button, Options and Settings, Application

Settings, Restore Default Button Labels and the Default softkey to confirm.

SCREEN AND SOUND

OPTIONS

Press the HOME button.

Press the Select softkey under

Options and Settings. Use the

Navigation Arrows to scroll to

Screen & Sound Options and

press the Select softkey.

Scroll to highlight the

appropriate feature and press

the Change softkey or the OK

button to select.

Brightness

1. Press the Change softkey on the bottom of your display to change the brightness on your display screen. Using the

Right and Left Navigation Arrows, adjust the Brightness level.

2. Press Save

Contrast

1. Press the Change softkey on the bottom of your display to change the Contrast level on your display screen. Using

the Right and Left Navigation Arrows, adjust the Contrast level.

2. Press Save

Personalized Ringing

1. Press the Change softkey to view a list of the available ring patterns

2. Two ring tone categories are available –Classic or Rich. Pressing the softkey below your chosen category will

reveal additional patterns

3. Using the down and up navigation arrows, select from a list of 8 Classic ring patterns or 6 Rich ring patterns.

4. Press the OK button to hear a ring pattern again

5. Press Save to select the ring pattern

Button Clicks

1. Press Change or OK to turn the Button Click sounds “On” or “Off”

2. Press Save

Error Tones

1. Press Change or OK to turn the Error Tones “On” or “Off”

2. Press Save

Phone Screen Width

1. Press the Change softkey or the OK button to change the screen width from “Full” (each call appearance or feature

occupies the entire width of a line) or “Half” (each call appearance or feature occupies half the width of a line,

displaying more call appearances or features per screen)

2. Press Save

Otros manuales para IP Office 9608

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Teléfono IP de Avaya

Avaya

Avaya T3 Classic Manual de usuario

Avaya

Avaya one-X 9600 Series Guía de instalación

Avaya

Avaya IP Office 9608 Manual de usuario

Avaya

Avaya 4625SW Manual de usuario

Avaya

Avaya 9620 Deskphone Edition Manual de usuario

Avaya

Avaya 9630 IP Manual de usuario

Avaya

Avaya IP Office H.323 Manual de usuario

Avaya

Avaya one-X 1616 Manual de usuario

Avaya

Avaya 1040E Manual de usuario

Avaya

Avaya IP Office 9608 Instrucciones de instalación y funcionamiento

Avaya

Avaya 9601 Manual del producto

Avaya

Avaya 9640 Series Manual de usuario

Avaya

Avaya Norstar M7310 Manual de usuario

Avaya

Avaya 3730 Manual de usuario

Avaya

Avaya IP Office 5610 Manual de usuario

Avaya

Avaya IP Office 9608 Manual de usuario

Avaya

Avaya IP Office 1603 Manual de usuario

Avaya

Avaya IP Office 2050 Manual de usuario

Avaya

Avaya IP Office 5410 Manual de usuario

Avaya

Avaya IP Office 3.2 Manual de usuario

Avaya

Avaya one-X 9630 Manual de usuario

Avaya

Avaya IP Office 2050 Manual de usuario

Avaya

Avaya 9620 Deskphone Edition Manual de usuario

Avaya

Avaya IP Office 4602 Manual de servicio

Manuales populares de Teléfono IP de otras marcas

Alcatel

Alcatel 4028 Manual de usuario

Polycom

Polycom Polycom VVX 600 Manual de usuario

Polycom

Polycom SoundPoint IP 450 Manual de usuario

Cisco

Cisco SPA-500 Series Manual de usuario

Polycom

Polycom SoundPoint IP 650 Manual de usuario

Proximus

Proximus Maestro 3016 IP Manual de usuario

Fanvil

Fanvil X4 Manual de usuario

Cisco

Cisco 7962 Manual de usuario

Snom

Snom 320 Manual de usuario

Yealink

Yealink Yealink SIP-T46G Manual de usuario

Yealink

Yealink SIP-T52S Manual de usuario

Nortel

Nortel 1140E Manual de usuario

Nexotek

Nexotek NT-P500 Manual de usuario

GE 28320EE2 - Dect 6.0 InfoLink 2 Manual de usuario

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manual de usuario

Nortel

Nortel i2050 Manual de usuario

Fiberme

Fiberme FAP260 Series Manual de usuario

Meridian

Meridian M5009 Manual de usuario