Autonics MP-XGT Instrucciones de instalación

MP-XGT(RS485)

Technical Support Manual

ii © Copyright Reserved Autonics Co., Ltd.

Preface

Thank you very much for selecting Autonics products.

Please familiarize yourself with the information contained in the Safety Precautions section

before using this product.

This user manual contains information about the product and its proper use, and should be kept

in a place where it will be easy to access.

Technical Support Manual Guide

4 © Copyright Reserved Autonics Co., Ltd.

Technical Support Manual Guide

Please familiarize yourself with the information in this manual before using the product.

This manual provides detailed information on the product's features. It does not offer any

guarantee concerning matters beyond the scope of this manual.

This manual may not be edited or reproduced in either part or whole without permission.

This manual is not provided as part of the product package. Please visit our home-page

(www.autonics.com) to download a copy.

The manual's content may vary depending on changes to the product's software and other

unforeseen developments within Autonics, and is subject to change without prior notice.

Upgrade notice is provided through our homepage.

We contrived to describe this manual more easily and correctly. However, if there are any

corrections or questions, please notify us these on our homepage.

Technical Support Manual Symbols

Symbol Description

Supplementary information for a particular feature.

Failure to follow instructions can result in serious injury or death.

Failure to follow instructions can lead to a minor injury or product damage.

An example of the concerned feature's use.

※1 Annotation mark.

Safety Precautions

6 © Copyright Reserved Autonics Co., Ltd.

Safety Precautions

Following these safety precautions will ensure the safe and proper use of the product and

help prevent accidents, as well as minimizing possible hazards.

Safety precautions are categorized as Warnings and Cautions, as defined below:

Warning Failure to follow the instructions may lead to a serious injury

or accident.

Caution Failure to follow the instructions may lead to a minor injury or

accident.

In case of using this unit with machinery (E.g.: nuclear power control, medical equipment,

ship, vehicle, train, airplane, combustion apparatus, safety device, crime/disaster prevention

equipment, etc) which may cause damages to human life or property, it is required to install

fail-safe device.

It may cause a fire, human injury or property loss.

The unit must be installed on a device panel before use.

Failure to follow this instruction may result in electric shock.

Do not connect, repair, or inspect the unit while connected to a power source.

Failure to follow this instruction may result in electric shock.

Do not disassemble or modify the unit. Please contact us if necessary.

Failure to follow this instruction may result in electric shock or fire.

Check the terminal numbers before connecting the power source and measurement input.

Failure to follow this instruction may result in fire.

Do not use the unit outdoors.

Failure to follow this instruction may result in electric shock or shortening the life cycle of the

unit.

When connecting the power input or measuring input, make sure to tighten the terminal

screw bolt above 0.74N•m to 0.90N•m.

Contact failure may result in fire.

Use the unit within the rated specifications.

Failure to follow this instruction may result in electric shock or shortening the life cycle of the

unit.

Do not use loads beyond the rated switching capacity of the relay contact.

Failure to follow this instruction may result in insulation failure, contact failure, contact

bonding, relay damage, or fire.

Do not use water or oil-based detergent when cleaning the unit. Use dry cloth to clean the

unit.

Failure to follow these instructions may result in electric shock or fire.

Do not use the unit where flammable or explosive gas, humidity, direct sunlight, radiant heat,

vibration, and impact may be present.

Failure to follow this instruction may result in fire or explosion.

Safety Precautions

Keep dust and wire residue from flowing into the unit.

Failure may result in fire or product malfunction.

Check the polarity of the measurement input contact before wiring the unit.

Failure to follow this instruction may result in fire or explosion.

Safety Precautions

8 © Copyright Reserved Autonics Co., Ltd.

Table of Contents

Preface ...........................................................................................................................3

Technical Support Manual Guide .....................................................................................4

Technical Support Manual Symbols.................................................................................5

Safety Precautions ...........................................................................................................6

Table of Contents .............................................................................................................9

1System ....................................................................................................... 11

1.1 Version ................................................................................................................ 11

1.2 Connections ........................................................................................................ 11

1.3 Communication cable connection....................................................................... 11

2Communication Setting............................................................................13

2.1 MP5W Setting .....................................................................................................13

2.2 XG5000 Setting...................................................................................................14

3Operation Check .......................................................................................23

Table of Contents

10 © Copyright Reserved Autonics Co., Ltd.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Autonics

Autonics

Autonics PSM Series Manual de uso y cuidado

Autonics

Autonics TF31-A Manual de usuario

Autonics

Autonics PSQ Series Manual de usuario

Autonics

Autonics MP5S Series Manual de usuario

Autonics

Autonics krn100 series Manual de usuario

Autonics

Autonics MP5M4N Manual de usuario

Autonics

Autonics KN-2000W Series Manual de usuario

Autonics

Autonics MP Series Manual de uso y cuidado

Autonics

Autonics MP5S Series Manual de usuario

Autonics

Autonics KRN1000 Series Manual de usuario

Autonics

Autonics KT-502H Manual de usuario

Autonics

Autonics krn100 series Manual de usuario

Autonics

Autonics krn100 series Manual de usuario

Autonics

Autonics KRN50 SERIES Manual de usuario

Autonics

Autonics MP5S Series Manual de usuario

Autonics

Autonics M4Y Series Manual de usuario

Autonics

Autonics MT4Y Series Manual de usuario

Autonics

Autonics MX4W Series Manual de usuario

Autonics

Autonics M5W Series Manual de usuario

Autonics

Autonics MT4Y Series Manual de usuario

Autonics

Autonics MT4N Series Manual de usuario

Autonics

Autonics AFL Series Manual de usuario

Autonics

Autonics PSAN Series Manual de usuario

Autonics

Autonics FXY Series Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario