Automationdirect.com Productivity 2000 P2-32NE3 Manual de usuario

Sales 800-633-0405 www.productivity2000.com 1

Input Specifications

Inputs per Module 32 (Sink/Source)

Operating Voltage Range (Tolerance) 24 VAC/VDC

Input Voltage Range 20.4 - 27.6 VAC/VDC

Peak Voltage Range 27.6 VAC/VDC

AC Frequency 47-63 Hz

Input Current Typ 3.4mA @ 24VAC/VDC

Maximum Input Current @ Temp 5.0mA @ 27.6 VAC/VDC

ON Voltage Level > 12 VDC, > 9 VAC

OFF Voltage Level < 10.5 VDC, < 9 VAC

Minimum ON Current 2.5mA

Maximum OFF Current 0.5mA

OFF to ON Response DC: 10ms > max

AC: 20ms

ON to OFF Response DC: 20ms > max

AC: 40ms

Status Indicators Logic Side (32 Points)

Commons per Module 4 Isolated (8 points/common)

Warranty: Thirty-day money-back guarantee. Two-year limited replacement.

(See www.productivity2000.com for details).

Terminal Block sold separately, (see wiring options on page 3).

Input Specifications .................................................. 1

Module Installation Procedure.................................. 2

QR Code .................................................................. 2

Hot Swap Information............................................... 3

Wiring Options.......................................................... 3

Wiring Diagram and Schematic................................ 3

Warning .................................................................... 4

Connector Specifications.......................................... 4

General Specifications ............................................. 4

P2-32NE3 AC/DC Input

The P2-32NE3 AC/DC Input Module provides

thirty-two 24VAC or VDC sink/source inputs

for use with the Productivity2000 System.

2000

www.productivity2000.com Tech Support 770-844-4200

Important Hot-Swap Information

The Productivity 2000 supports hot-swap! Individual

modules can be taken offline, removed, and replaced

while the rest of the system continues controlling your

process. Before attempting to use the hot-swap feature,

be sure to read the hot-swap topic in the programming

software’s help file or our online documentation at

AutomationDirect.com for details on how to plan your

installation for use of this powerful feature.

Use any QR Code reader application to

display the module’s product insert.

Module Installation

WARNING: Do not apply field power until

the following steps are completed. See

hot-swapping procedure for exceptions.

Step One: Align module

catch with base slot and

rotate module into

connector.

Step Two: Pull top locking

tab toward module face. Click

indicates lock is engaged.

Step Three: Attach field

wiring using the removable

terminal block or ZIPLink

wiring

system.

1 Align

with slot

2rotate

to seated

position

Locked Unlocked

QR Code

Caution: If possible, remove field power prior to

proceeding. If not, then EXTREME care MUST be taken

to prevent damage to the module, or even personal injury

due to a short circuit from the live terminal block.

Wiring Diagram and Schematic

Sales 800-633-0405 www.productivity2000.com 3

WiringOptions

Wiring Options

ZIPLink Modules

Feed through ZL-RTB40

0.5m (1.6FT) cable

1.0m (3.3FT) cable

2.0m (6.6FT) cable

ZL-CBL-40

ZL-CBL-40-1

ZL-CBL-40-2

ZIPLink Connection System

Cable + ZIPLink Module = Complete System

ZIPLink pre-wired

cables

Note: P2-32NE3 is UL/CUL listed when used

with ZL-RTB40

24VDC

24VAC

24VDC

24VAC

24VDC

24VAC

24VDC

24VAC

ZL-RTB40

Labels

5 6 7 8 C1 13 14 15 16 C2 21 22 23 24 C3 29 30 31 32 C4

1234C1 910 11 12 C2 17 18 19 20 C3 25 26 27 28 C4

www.productivity2000.com Tech Support 770-844-4200 Sales 800-633-0405 www.productivity2000.com

Document Name Edition/Revision Date

P2-32NE3-DS 1st Ed. 10/21/2015

WARNING: To minimize the risk of potential safety problems, you

should follow all applicable local and national codes that regulate

the installation and operation of your equipment. These codes vary

from area to area and it is your responsibility to determine which

codes should be followed, and to verify that the equipment, instal-

lation, and operation are in compliance with the latest revision of

these codes.

Equipment damage or serious injury to personnel can result

from the failure to follow all applicable codes and standards. We

do not guarantee the products described in this publication are

suitable for your particular application, nor do we assume any

responsibility for your product design, installation, or operation.

If you have any questions concerning the installation or opera-

tion of this equipment, or if you need additional information, please

call Technical Support at 770-844-4200.

This publication is based on information that was available at

the time it was printed. At AutomationDirect.com® we constantly

strive to improve our products and services, so we reserve the right

to make changes to the products and/or publications at any time

without notice and without any obligation. This publication may also

discuss features that may not be available in certain revisions of

the product.

General Specifications

Surrounding Air Temperature 0° to 60°C (32° to 140°F),

Storage Temperature -20° to 70°C (-4° to 158°F)

Humidity 5 to 95% (non-condensing)

Environmental Air No corrosive gases permitted

Vibration IEC60068-2-6 (Test Fc)

Shock IEC60068-2-27 (Test Ea)

Field to Logic Side Isolation 1500VAC applied for 1 second

Insulation Resistance >10MΩ @ 500VDC

Heat Dissipation 3W

Enclosure Type Open Equipment

Agency Approvals UL508 file E139594, Canada & USA

CE (EN61131-2*)

Module Keying to Backplane Electronic

Module Location Any I/O slot in a Productivity2000 System.

Field Wiring Use ZIPLink Wiring System only. See “Wiring

Options” on page 3.

EU Directive

See the “EU Directive” topic in the Productivity

Suite Help File. Information can also be obtained

at: www.productivity2000.com

Weight 104g (3.7 oz)

*Meets EMC and Safety requirements. See the D.O.C. for details.

Connector Specifications

Connector Type IDC style Header with latch, Omron XG4A-4034

Number of Pins 40

Pitch

0.1 in. (2.54 mm)

Otros manuales de Sistema de E/S de Automationdirect.com

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08ADL-2 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08NA Manual de usuario

Automationdirect.com

Automationdirect.com Stride SIO-MB08THMS Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08NAS Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16AD-1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-04RTD Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-15CDD1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-4ADL2DAL-2 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08AD-2 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16ADL-1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08NE3 Manual de usuario

Automationdirect.com

Automationdirect.com Stride SIO-MB04THMS Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-4ADL2DAL-1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-16NE3 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16NA Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16AD-2 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16NE3 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-04ADL-1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 3000 P3-08AD Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08ADL-1 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16ADL-2 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 2000 P2-06RTD Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08ND3 Manual de usuario

Automationdirect.com

Automationdirect.com Productivity 1000 P1-15CDD2 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

WAGO

WAGO 750-344 Manual de usuario

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario