ASC-2 (Patent# 7,461,415)
AUTO SPA COVER INSTRUCTION MANUAL
Document Number RE:ASC-2-E4
Auto Spa Cover Inc (ASC) has prepared this manual for use by authorized installation personnel. The informa-
tion contained herein is the property of ASC and shall not be reproduced in whole or in part without the prior
written approval of ASC.
ASC reserves the right to make changes without notice to the specication(s) and materials contained herein
and shall not be responsible for any damages (including consequential) caused by reliance on the materials
presented, including but not limited to typographical or listing errors.
Please address any questions, comments and suggestions to:
AUTO SPA COVER INC
Paso Robles, CA 93446
Tel: (805) 226-5030
www.autospacover.com
The ASC-2 is designed for spas 7ft or larger in length with 2 1/2” thick covers.
We offer kits for smaller spas and/or newer 4” thick spa covers.
Disclaimer:
The information contained in this Manual is for general information purposes only. The information is
provided by AutoSpaCover and while we endeavor to keep the information up to date and correct, we
make no representations of any kind, express or implied, about the completeness, accuracy, reliability,
suitability or availability with respect to the information, products, services, or related graphics con-
tained in this Manual for any purpose. Any reliance you place on such information is therefore strictly
at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential
loss or damage whatsoever arising from the use of this Manual.
AutoSpaCover is not responsible for water logged or overweight covers , ASC assumes no responsibility
for system failure due to water logged covers.
AutoSpaCover may not function properly with an over weight/water logged cover.
Spa/hot tub covers should not weigh more that 2 times the weight of a new dry cover.
DO NOT LET CHILDREN USE THE REMOTE CONTROL OR OPERATE THE ASC-2
January 12th, 2016
Legal Information
