Autel TPMS501B Manual de usuario
Content
1、Important statement-----------------------------01
2、Working principle--------------------------------02
3、Product list----------------------------------------02
4、Installation instructions-------------------------03
5、Working mode------------------------------------06
6、Parameter setting-------------------------------09
7、Technical parameter----------------------------14
8、FAQ------------------------------------------------14
- 01 -
1. Important statement
1.1 Welcome to use Carxpert tire pressure monitoring system. The
installation proposal of this product is operated by professionals and
equipment. Please read this manual carefully before installing this product
to ensure correct installation and use.
1.2 This product is suitable for radial tires and aluminum alloy rim with a
standard pressure of ≤3.0 bar, not for steel rim.
1.3 The solar panel is only for charging assistance. Light intensity needs to
meet certain conditions to maintain charging. Indoor, cloudy, glass film,
display angle, interior temperature of more than 55 ℃will affect solar
charging. When the display is low, charge the display with a USB cable to
keep the battery in optimal use.
1.4 This product can monitor the air pressure and temperature of the car
tires and remind the owner to take timely measures to eliminate hidden
dangers when there is abnormal air pressure temperature, but cannot
prevent traffic accidents and the occurrence of flat tires, users should still
regularly check the following conditions: Whether the depth has reached
the wear limit, whether the tire has bruises, unilateral wear, breaks, cracks,
perforation and other defects.
1.5 If subjected to electromagnetic interference, it may cause unstable
signal reception, affecting the normal use of this product
1.6 It is prohibited for the customer to remove, modify, change products or
any other operations, with which the product may not work properly. The
customer will take the responsibility.
1.7 For your safety and passenger safety, do not place the display on the
airbag. The anti-slip mat only provides auxiliary fixing, in order to better
secure the display, it is recommended to use 3M double-sided adhesive to
fix (can be purchased separately).
3. Product list
Anti-slip mat X1
Instruction manualX1
Warning labelX4
Instruction
manual
- 02 -
1.8 Specifications and technical parameters may be changed due
to upgrades and other reasons, resulting in inconsistence with the
instruction manual. Please prevail in kind and manufacturers
reserve the right to explain.
2. Working principle
The tire pressure monitoring system, referred to as TPMS, works by
monitoring the internal pressure and temperature of the tire through a
sensor mounted on the tire, and transmitting the collected data information
to the display installed in the cab by using radio frequency technology.
TPMS can monitor the tire pressure and temperature information in real
time, and provide early warning of abnormal conditions such as low
pressure, high pressure and high temperature of the tires, reminding the
owner to take corresponding effective measures, thus playing a role of
safety assistance, so as to achieve safer, more reliable, more comfortable
and more economical travel.
DisplayX1 D SensorX4 X SensorX4 C SensorX4
USB cableX1
Attention
Sen sor Ins ide
" "key
- 03 -
4. Installation instruction
4.1 Display installation
Tips:
Recommended place of display installation
"+"key USB charging port
Long press the "-" key for 3 seconds to turn on/off, use anti-slip mat to
securely place on the dashboard for easy observation and sunlight. The
monitor is turned on in advance. The tire data will be displayed in turn
when the sensor is installed. Each parameter of the display has been set
at the factory. Users generally don’t need to set up again.
1. After turning on the vehicle, it will go to sleep after being stationary for
more than 120 seconds to save power. It will automatically turn on when
the vehicle is running or there is vibration.
2. The anti-slip mat can be restored to stickiness after being washed with
water and dried.
- 04 -
① Strip the tire from the wheel ② Remove the valve of the car
4.2 Sensor installation(take D sensor as a sample)
Front left AFront right B
Each sensor is labeled with a corresponding position, such as left front
wheel A, right front wheel B, right rear wheel C, and left rear wheel D,
which must be accurately installed on the corresponding hub. After
installation, attach a warning label near the rim of the sensor.
Left rear DRight rear C
③Clean the valve hole ④ Install the sensors
- 05 -
Precautions:
CEMB
ER60
⑥ Sample of installation ⑤ Use M11 socket to lock nut
with torque 5 N.M
⑦ Check tire dynamic balance ⑧ Replace the tire
a. The installation angle of the sensor electronic module must be parallel to
the rim, which is more conducive to ensuring continuous work and
accuracy. The specific location is as follows:
parallel
The display has a built-in rechargeable polymer battery. When the solar
light reaches the charging condition, the solar icon" " is illuminated. If
the battery is not fully charged, the solar power is automatically charged.
When charging, the scroll bar in the battery icon " " is beating. When
the battery icon " " is displayed, please remove the monitor and charge
it with a USB cable. When it is fully charged, it displays " ".
- 06 -
Tips:
5. Working mode
5.2 Display charging
5.1 Display screen
Front left temp
Temperature unit Solar charging icon
Pressure unit
Display power icon
Tire alarm icon
Tire position icon
b. After the sensor installation is
complete, check the tires for air
leaks and spray the valve nozzle
with foam water to confirm. If the air
leaks, please adjust the valve angle
or clean the rim hole.
If there is no data displayed after installation, please inflate or deflate the
corresponding tire or drive a certain distance at a speed of more than 30
kilometers per hour for normal display.
Pressure unit
Front left pressure Front right pressure
Front right temp
Left rear temp Right rear temp
Left rear pressure Right rear pressure
Temperature unit
When the display detects a tire pressure lower than the alarm value,
trigger tire pressure alarm. Alarm icon“ ” flashes at the same time
as the tire pressure value of the tire, and alarm sound “di…di…di…”is
heard, as shown in the left front wheel low pressure alarm.
- 07 -
5.3 Display backlight mode
5.4 Alarm status
When the display detects a tire pressure higher than the alarm value,
trigger tire pressure alarm. Alarm icon“ ”and tire pressure value
flash at the same time and emit alarm sound “di…di…di…” The picture
shows high pressure alarm for the left front wheel.
Abnormal
High
pressure
alarm
Icon & Description
Low
pressure
alarm
Tips:
After the display goes to sleep or is turned off, the solar panel will continue
to work. When the temperature inside the car exceeds 55 °C, the display
will automatically stop charging to protect the battery and safety.
The light adjustment can be automatic or manual, subject to actual product
model. No setting is required for automatic adjustment. For manual
adjustment, press the "-" key to adjust the backlight brightness, which is
divided into low, medium and high-end, the higher the brightness, The
shorter the battery life.
When the tire pressure or temperature exceeds the default factory value or
set value, the system will automatically issue an alarm sound “di…di…-
di…” Press any key to cancel the alarm sound, but the corresponding tire
icon, pressure value, temperature value and alarm icon remain blinking
until all tire failures are resolved.
When the monitor detects a low battery in a tire sensor, the alarm icon
“ ”, Tire position icon, tire pressure value flash at the same time, and
emits alarm sound “di…di…di…” The picture shows sensor Low
battery alarm for the right rear wheel.
When the monitor detects a tire temperature exceeding the alarm
value, the tire temperature alarm is triggered. The alarm icon“ ”
flashes at the same time and emits alarm sound “di…di…di…”. The
picture shows high temperature alarm for the left front wheel.
- 08 -
High
temper-
ature
alarm
Sensor
battery
low
battery
alarm
Display
battery
low
battery
alarm
Icon & DescriptionAbnormal
When the battery power in the display is low, the battery icon
appears as" ", Please charge with USB cable in time.
Tabla de contenidos
Otros manuales de Instrumento de medición de Autel
Autel
Autel AutoLink AL629 Manual de usuario
Autel
Autel MaxiTPMS TS408 Manual de usuario
Autel
Autel MaxiScan MS309 Manual de usuario
Autel
Autel MaxiBAS BT608 Manual de usuario
Autel
Autel MaxiTPMS TBE200 Manual de usuario
Autel
Autel MaxiTPMS TS601 Manual de usuario
Autel
Autel AL539 Manual de usuario
Autel
Autel TBE200E Manual de usuario
Autel
Autel Oil Reset Tool Manual de usuario
Autel
Autel MaxiTPMS TS201 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario