1 Introduction
1.1 Read this first
This manual contains important information for use during installation and maintenance of the Power
Export Limit Device (PELD) with Autarco’s inverters.
To reduce the risk of electrical shock, and to ensure the safe installation and operation, the following safety
symbols appear throughout this document to indicate dangerous conditions and important safety
instructions.
WARNING! Indicates safety instruction, which if not correctly followed, can result in injury
or property damages.
RISK OF ELECTRIC SHOCK! Indicates safety instructions, which if not correctly followed,
could result in electric shock.
HOT SURFACE! Indicates safety instructions, which if not correctly followed, could result
in burns.
1.2 Target Audience
This manual is intended for anyone who uses Autarco inverters in conjunction with a Power Export Limiting
Device (PELD). Before any further action, the operators must first read all safety regulations and be aware
of the potential danger to operate high-voltage devices. Operators must also have a complete
understanding of this device’s features and functions.
ATTENTION! Qualified personnel means a person with valid license from the local authority in:
●Installing electrical equipment and PV power systems (up to 1000 V).
●Applying all applicable installation codes and using Personal Protective Equipment.
●Analyzing and reducing the hazards involved in performing electrical work.
WARNING! Do not use this product unless it has been successfully installed by qualified personnel in
accordance with the instructions in chapter 4 “Installation”.
