Autani 1000179-01 Manual de usuario
User’s Manual
PSC autaniNet Module
Model Number: 1000179-01
Document Number: 80308
7090 Columbia Gateway Drive, uite 140
Columbia, MD 21046
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this information
without the expressed written consent of Autani, LLC is prohibited.
PSC autaniNet Module User’s Manual
1. Description
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
2 of 14
Version Date Changed B Revision Description
1 10-23-2019 MEP Preliminary
Table of Contents
1. Description ............................................................................................................... 3
2. Ordering Information ............................................................................................... 4
3. Specifications........................................................................................................... 4
3.1
Absolute Maximum Ratings ........................................................................................................... 4
3.2
Recommended Operating Conditions ........................................................................................... 4
3.3
Electrical pecifications ................................................................................................................. 5
4. Block Diagram .......................................................................................................... 6
5. Host Interface ........................................................................................................... 7
6. Capabilities ............................................................................................................... 8
7. Connector Pin Assignments ................................................................................... 9
8. Antenna .................................................................................................................. 10
9. Dimensions ............................................................................................................ 11
10. Certifications .......................................................................................................... 12
10.1
FCC – United tates .................................................................................................................... 12
10.2
IC – Canada ................................................................................................................................ 13
11. Handling and Storage ............................................................................................ 14
11.1
Alterations .................................................................................................................................... 14
11.2
Handling ...................................................................................................................................... 14
11.3
torage ........................................................................................................................................ 14
PSC autaniNet Module User’s Manual
1. Description
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
3 of 14
1. Description
The P C autaniNet Module provides a cost-effective RF transceiver for 2.4 GHz IEEE 802.15.4
wireless networks. The P C autaniNet Module is based on the Ember EM358X ystem-on-a-
Chip ( oC) and it has been designed to support larger, denser, sleepier, more mobile, secure,
and resilient wireless networks.
Features:
• Designed for autaniNet wireless networks
• Miniature footprint: 0.940” x 1.120”
• Wire antenna
• 15 RF channels
• Integrated hardware support for Ember development environment
• IF debug port
• AE 128-bit encryption
• Low power consumption
• FCC and IC Certified (pending)
• 512KB Flash Memory
• 64KB RAM
• 32-bit ARM Cortex-M3 microprocessor
• RoH Compliant
• Made in USA
PSC autaniNet Module User’s Manual
2. Ordering Information
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
4 of 14
2. Ordering Information
Part Number Description
1000179-01 P C autaniNet Module
3. Specifications
3.1 Absolute Maximum Ratings
Note: Exceeding the maximum ratings may cause permanent damage to the module.
Parameter Min Max Unit
Power upply Voltage (V
DD
) 2.1 3.6 V
Voltage on any digital pin -0.3 V
DD
+0.3 V
torage Temperature -40 125
o
C
3.2 Recommended Operating Conditions
Note: Operating conditions outside those listed here may cause inappropriate behavior.
Parameter Min T p. Max Unit
Power upply Voltage (V
DD
) 2.5 3.3 3.6 V
Operating Temperature 0 25 70
o
C
Logic Input Low Voltage 0 0.2xV
DD
V
Logic Input High Voltage 0.8xV
DD
V
DD
V
RF Tx Power (Ch11-Ch25) +8 dBm
PSC autaniNet Module User’s Manual
3. Specifications
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
5 of 14
3.3 Electrical Specifications
Parameter Min T p. Max Unit
General Characteristics
RF Frequency Range 2.400 2.480 GHz
Data Rate 250 Kbps
Processor core frequency 12 MHz
Flash Memory 512 KB
RAM 64 KB
Power Consumption
Transmit Mode 45.0 mA
Receive Mode 30.0 mA
Processor Only Mode 8.5 mA
Deep leep Mode 1 uA
Logic Characteristics
Logic Input High 0.8xV
DD
V
DD
V
Logic Input Low 0 0.2xV
DD
V
Logic Output High 0.82xV
DD
V
DD
V
Logic Output Low 0 0.18xV
DD
V
Output ource/ ink Current 4 mA
Output ource/ ink Current for high
current pad: PA6,PA7,PB6,PB7,PC0
8 mA
Logic High Input Current 0.5 uA
Logic Low Input Current -0.5 uA
Input Pull-up Resistance 24 29 34 kΩ
Input Pull-down Resistance 24 29 34 kΩ
PSC autaniNet Module User’s Manual
4. Block Diagram
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
6 of 14
4. Block Diagram
PSC autaniNet Module User’s Manual
5. Host Interface
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
7 of 14
5. Host Interface
The P C autaniNet Module incorporates one Universal Asynchronous Receiver/Transmitter
(UART) interface dedicated to the host for communication to and from the module. Also
available is one General Purpose Input/Output (GPIO) and a WAKE interrupt input used to wake
up the module from low power sleep mode. The GPIO and WAKE interface connections may or
may not be used for this application. The host supplies 3.3VDC and GND to power the module.
PSC autaniNet Module User’s Manual
6. Capabilities
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
8 of 14
6. Capabilities
The P C autaniNet Module was designed to be used with 3
rd
party products such as Wired Wall
witches and Motion ensors. The P C autaniNet Module provides a cost-effective RF
transceiver for 2.4 GHz IEEE 802.15.4 ZigBee wireless networks. The P C autaniNet Module
is based on the Ember EM358x ystem-on-a-chip ( oC) and has been designed to support
larger, more secure, and resilient wireless networks. The EM358x is a 32-bit ARM Cortex-M3
Processor with a 2.4GHz IEEE 802.15.4-2003 RF transceiver.
The on-board EM358x ( oC) provides 24 GPIO ports to support all on-board functions such as
a Push-Button witch, two LED’s, Flash Memory for over-the-air firmware updates and
connections for programming and debugging. All GPIO’s are configurable as input, output, or
bi-directional and have an internal pull-up or pull-down. The Push-Button witch and LED’s are
used during installation to commission each device on the wireless network.
The P C autaniNet Module is powered from a 3.3VDC power source provided from the 3
rd
Party
product (Occupancy ensor, Wall witch, etc.) and communicates to the 3
rd
Party product via a
2-wire serial connection to control the operation of the 3
rd
Party product – such as controlling a
relay in an Occupancy ensor or Wall witch.
The P C autaniNet Module uses a wire antenna connected to J1 (IPEX4/MHF4 RF connector)
to communicate wirelessly in a mesh network topology using the ZigBee protocol (2.4GHz I M
band).
The P C autaniNet Module contains a shield that covers the RF circuitry.
PSC autaniNet Module User’s Manual
7. Connector Pin
Assignments
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
9 of 14
7. Connector Pin Assignments
J1 (Off-Module Antenna Connector)
Pin Name Type Description
1 Ext. Ant. I/O U.FL Off-Module Antenna Connector
J2 (10-pin Program/Debug Header)
Pin Name Type Description
1 VDD Input +3.3VDC power supply to module
2 PC2/JTDO Output Program/Debug JTAG Data-Out
3 PC0/JR T Input Program/Debug JTAG Reset
4 PC3/JTDI
Input
Program/Debug JTAG Data-In
5 GND GND Power supply ground reference
6 JCLK Input Program/Debug JTAG Clock
7 PC4/JTM Input Program/Debug JTAG Mode elect
8 R T# Input Program/Debug Processor Reset
9 PA4/PTIEN Output Program/Debug Packet Trace Interface Enable
10 PA5/PTIDATA
Input Program/Debug Packet Trace Interface Data
J3 (6-pin Receptacle) – Seral Communication
Pin Name Type Description
1 GND GND Power supply ground reference
2 VDD Input +3.3VDC power supply to module
3 TX Output UART interface transmit
4 RX
Input
UART interface receive
5 GPIO I/O General purpose input/output
6 WAKE Input Module wake-up interrupt signal
PSC autaniNet Module User’s Manual
8. Antenna
CONFIDENTIAL AND PROPRIETARY
The information contained in this document is proprietary and confidential information of Autani, LLC. Any use of this
information without the expressed written consent of Autani, LLC is prohibited.
10 of 14
8. Antenna
The P C autaniNet Module uses a wire antenna connected to J1 (I-PEX, MHF4 connector).
The P C autaniNet Module is FCC certified for use with the antenna shown below.
FCC Approved Antenna Specifications
Manufacturer henzhen Taida Century Technology Co., Ltd
Part Number WF2400-081IPEX
Type Whip traight (Wire)
Overall Wire Length 150mm +/-3mm
Material of Radiator Cu
Connector IPEX4 (MHF4)
.W.R. 2.0 max.
Frequency 2400 ~ 2500 MHz
Gain (typical) 1.5dBi +/-0.7
Impedance 50 ohm
Polarization Linear
Operating Temperature -40
o
C ~ +65
o
C
torage Temperature -40
o
C ~ +80
o
C
NOTE: Use of alternate antenna types or the same type with higher gain is not permitted without
additional testing and FCC approval.
Tabla de contenidos
Otros manuales de Unidad de control de Autani
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
