Augmented Vision Labs S5 Inserter Manual de usuario

For Scleral and Hybrid Lenses

1. Safety precautions (Please read before use) .……….………… Page 2

2. Warranty information ………………………………………………...…Page 2

3. A message from our founder ..………………………………….……. Page 3

4. Device description …………………………………………………………. Page 3

5. Device maintenance (Please read before use) ..…….……….. Page 4

6. Instructions for lens insertion ……………….……………………….. Page 5

7. Demonstration video ………………….…………………………………. Page 15

8. Join our online community …………………………………………….. Page 16

Submit Warranty Registration

SAFETY PRECAUTIONS

1. Please consult with your eyecare provider for instructions on how to clean and

maintain your lenses. Your doctor will recommend the appropriate lens cleaning

and maintenance products that you should use with your lenses.

2. If you experience pain or a decrease in the quality of your vision after using the

S5 Inserter™stop using the device and contact your eyecare provider

immediately.

3. Lens Holder:

a. Please read the insert provided with the lens holder before using it.

b. ALLERGY NOTICE: The lens holder provided with the S5 Inserter™(known

as the DMV® Vented Scleral Cup™SynergEyes® Model) contains latex.

c. The lens holder provided with the S5 Inserter™is only intended for use in

lens insertion. Do not use the provided lens holder during lens removal.

d. CHOKING HAZARD: Please keep the lens holder out of the reach of

children.

WARRANTY INFORMATION

Your S5 Inserter™comes with a 1-year warranty which covers the replacement of any

components that fail to operate as expected due to a manufacturer defect. For a limited

time, receive a $50 credit towards any future purchase by completing your warranty

registration within 14 days of receiving your device. Register your device at

https://augmentedvisionlabs.com/warranty/ or by clicking the button below.

AMESSAGE FROM OUR FOUNDER

Thank you for purchasing the S5 Inserter™. I developed this device to eliminate the

frustration that my patients faced with inserting their scleral and hybrid lenses. My goal

is that it will do the same for you. To ensure that this happens, I’m making myself

available 7 days a week to help you learn how to insert your lenses safely and efficiently.

Please reach out to me if you are not successful with inserting your lenses on the first

day of using your S5 Inserter™. I will work with you to find the root cause of the

challenges that you are experiencing. I will then share specific tips that will help you

overcome those challenges. We are proud of the fact that 100% of S5 Inserter™users

who have reached out to us are now able to successfully insert their lenses. I wish you

great success as you begin using your device.

Best wishes,

Dr. Fayiz Mahgoub, OD

Founder, Augmented Vision Labs, LLC

Email: support@augmentedvisionlabs.com

Cell: +1-970-402-5789

DEVICE DESCRIPTION

The S5 Inserter™was designed to make struggling with scleral and hybrid lens insertion

a thing of the past. By holding your lens in place, your device allows you to have two

hands available to hold your eyelids open. This will allow you to counter the human

blink reflex which is often triggered when the lens is on or near the eye. The LED light

will help you accurately align your eye with the center of your lens during insertion. This

will help reduce accidental spilling of the saline solution due to misalignment between

your eye and the lens. As a result, you will be able to insert your lenses in fewer

attempts, with fewer air bubbles and less frustration.

DEVICE MAINTENANCE

1. Please clean the rubber lens holder with an alcohol wipe before every use and

allow it to dry completely before placing a lens on it. The lens holder should be

replaced at least once every 3 months.

2. Immediately after inserting your lenses, please take a moment to remove any

liquid that may have spilled onto your device. Do not disconnect the light unit

from the telescoping arm until after you have dried the outside of the light unit

with a paper towel. This will help prevent water from getting into the electronic

components of your device.

3. Please make sure that the storage case for your device is completely dry before

storing the device in it. If you store containers that hold liquids (ex. contact lens

cases) in your case, please ensure that they are securely closed to prevent liquid

damage to your device.

a. We recommend cleaning the outside of your device as well as the inside of

your storage case at least once per week with alcohol wipes. After

cleaning, make sure that all parts are completely dry before storing them.

4. The bottom of the suction base should be cleaned periodically with an alcohol

wipe to ensure maximum suction.

5. Charging the light unit:

a. When you notice the light becoming dim, it’s time to charge the light unit.

i. Locate the USB port on the bottom of the light unit.

ii. Connect the female end of the provided USB extension cable to the

bottom of the light unit.

iii. Connect the male end of the cable to a desktop or laptop

computer.

b. The light unit will reach a full charge after 1 hour of being plugged in.

INSTRUCTIONS FOR USE

BEFORE LENS INSERTION

1. Place the suction base on a smooth, flat surface. Ensure that both the bottom of

the suction base and the surface are clean and dry.

2. Hold down the outer edge of the suction base while pulling metal telescoping

arm upward until it locks into place in the vertical position. This will engage the

suction of the base.

3. Once the telescoping arm is in the vertical position, slide the base of the arm

forward for increased stability (see picture below).

4. Extend the telescoping arm to the desired height.

a. We recommend that you keep the height as low as possible when you

are first learning to use the device to reduce the chance of your lens

being accidentally bumped off the lens holder and falling from a high

distance. This could cause the lens to become lost or damaged. When

you become confident in your ability to consistently insert the lens

without it falling, you can increase the height to your preferred height

for lens insertion.

5. Connect the light unit to the top of the telescoping arm.

Step 2

Step 3

6. Connect the rubber lens holder to the top of the light unit.

7. Wash your hands with a scent-free, moisturizer-free soap for 20 seconds and dry

them with a lint-free towel.

8. Clean the rubber lens holder with a disinfecting alcohol wipe.

a. Allow the lens holder to dry completely before placing your contact lens

on it.

Step 5

Step 6

9. Clean the upper segment of the light unit (the part that twists) with a disinfecting

alcohol wipe.

a. You can use the same wipe that you previously used to clean the lens

holder.

10.Twist the top half of the light unit counterclockwise to activate the light.

11. Inspect your lens to make sure it is clean and free of damage then place it on the

rubber lens holder.

a. It is recommended to rinse your lens with preservative free saline if it was

previously stored in a multi-purpose cleaning solution.

b. If your lens has a black dot that is used for positioning your lens, please

make sure that the dot is placed at the position recommended by your

doctor (example: place the black dot at the 6 o’clock position).

12. Fill the lens bowl with a preservative-free saline solution that is approved by

your doctor.

a. Add saline until the level rises above the edge of the lens.

LENS INSERTION

1. Place your head directly over the lens, making sure that your head is level with

the surface that your device was placed on. Your chin should be tucked in toward

your chest.

2. Use both hands to firmly hold your upper and lower eyelids open.

a. Tip #1: Place your fingers as close as possible to your eyelashes (without

touching your eyelashes) to get the best grip on your eyelids.

b. Tip #2: Pull your upper lid upward and pin it against your brow bone by

pressing your finger in towards your face. Pull your lower lid down and pin

it against your cheek bone by pressing your finger in towards your face.

See the picture below for an example of what this should look like.

3. Keep both eyes open and slowly move your head down toward the lens until

your eye makes contact with the lens.

a. Tip #1:Focus on the light as you move closer to the lens. The light will look

perfectly round if you are lined up with the center of the lens. If the light

does not look round, you will need to adjust the position of your head

until it becomes round.

Press lower eyelid

against cheek bone.

Press upper eyelid

against brow bone.

b. Tip #2: The first thing you will feel is your eye touching the saline solution.

Do not slow down when you feel the saline. Keep going at the same pace

until you feel the pressure of the lens being pressed against your eye. It

is normal for saline to spill out of the lens bowl during this process.

4. Once you feel the pressure of the lens being pressed onto your eye, move your

head up and away from the device and slowly release your eyelids.

5. Twist the top half of the light unit clockwise to turn the light off.

6. For your second eye:

a. Repeat steps 10 through 12 in the “Before Lens Insertion” section to

prepare your second lens for insertion.

Otros manuales para S5 Inserter

Tabla de contenidos

Otros manuales de Equipo médico de Augmented Vision Labs

Augmented Vision Labs

Augmented Vision Labs S5 Inserter Manual de usuario

Augmented Vision Labs

Augmented Vision Labs S5 Inserter Manual de usuario

Augmented Vision Labs

Augmented Vision Labs S5 Inserter Manual de usuario

Manuales populares de Equipo médico de otras marcas

TekTone

TekTone Tek-CARE160 Manual de usuario

NeuroMetrix

NeuroMetrix Quell 2.0 Manual de usuario

AMT

AMT XLR8 Manual de usuario

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Manual de usuario

EDAN

EDAN SONOTRAX Pro Manual de usuario

Restorative Therapies

Restorative Therapies RT300 Manual de usuario

Gendex

Gendex Expert DC Manual de usuario

Dexcowin

Dexcowin ADX4000W Manual de usuario

Libelium

Libelium MySignals Manual de usuario

Acelity

Acelity V.A.C.ULTA 4 Manual de usuario

Caputron

Caputron ActivaDose II tDCS Manual de usuario

FujiFilm

FujiFilm Sonart Manual del propietario

Plinth 2000

Plinth 2000 93CDT Manual de usuario

GE SENOGRAPHE 800T Manual de usuario

GE Definium 5000 Manual de usuario

Kanmed

Kanmed GE-1380 Manual de usuario

Huntleigh

Huntleigh FD1 Manual de usuario

Stryker

Stryker SPR Plus Manual de usuario