Audion Golden Night 300B Manual de usuario

Revision 1.02Silver Night -1 -Audion International

Silver Night

Power Amplifiers

User Manual

Models Covered

Stereo 300B -7 Watt Mk1 & 2

Stereo Integrated 300B -7 Watt Mk1 & 2

Stereo PX25 Mk2 –8 Watt

Stereo Integrated PX25 -8Watt Mk2

Parallel Single Ended 300B Mk1& 2

Push Pull 300B Mk1

Revision 1.02Silver Night -2 -Audion International

Introduction

Congratulations on your purchase of the World acclaimed “Silver

Night” triode amplifier from Audion.

Your Audion Amplifier is the result of nearly 20 years’exhaustive

research and development culminating in our current world class

product. The chassis is made of anodised aluminium designed to

minimise magnetic interference and reduce internal noise to an

absolute minimum. All our amplifiers are hand built using only the

finest components available our Mark 2 range is entirely hard

wired offering even better quality.

Our new look corporate colouring Blue, Red and now Black are

available for both our Mark 1 and 2 ranges and represent our

guarantee to you of quality.

Warranty

All of our products carry a 2 (two) year worldwide parts and labour

warranty (less delivery charges). All valves/tubes are guaranteed

for a period of 6 (six) months. This does not affect your statutory

rights.

Revision 1.02Silver Night -3 -Audion International

Getting Started

Upon opening your box you will find:

1. Audion Amplifier

2. Power cord

3. This User Manual

4. Product Registration and Warranty form

5. Authenticity Certificate (Mark 2 versions only)

6. Valves/tubes

Please keep all packaging and store in a dry and safe place.

Carefully remove your Audion Amplifier from its packaging and

store both the box and the foam in a safe place, should, in the

unlikely event that you ever need to return your Audion to us for

maintenance, upgrading or servicing. The packaging has been

specifically designed to protect your amplifier.

Before attempting to connect your Audion please read carefully

and understand thoroughly the contents of this manual. Keep this

manual near you when installing your Audion so it is handy for

reference.

This manual is designed to assist both novice and experienced

persons in achieving satisfaction from your Audion. It describes the

features and operation.

Please Note.

As with any electrical product extreme caution should be

exercised. Do not place your Audion in direct sunlight. There are

no user serviceable parts inside. The valves/tubes run HOT in

normal operation, under no circumstance during operation should

they be touched. If it becomes necessary to replace a valve/tube

please allow at least 20 minutes from switching off for the unit to

cool down.

Revision 1.02Silver Night -4 -Audion International

Valves/Tubes

You will now need to place the valves/tubes into your Audion. The

Silver Night Mark 1 uses a 6922 in the left hand side front and a

5687 on the right hand side front. The Silver Night Mark 2 Stereo

and Push/Pull uses 6922’s in both the left and right hand sides.

The Silver Night P.S.E. uses a CVX100 in the left hand side and a

CVX120 in the right hand side. All Models use either 300Bor PX25

valve/tubes in the rear sockets depending on the model ordered.

Revision 1.02Silver Night -5 -Audion International

All Audion valve/tubes are dynamically selected and where

applicable are supplied as matched pairs. All are supplied with a

six (6) month return to base warranty.

Please Note

Inserting the valve/tubes the wrong way around will at the very

least damage the valve base pins and may result in a loose valve

causing crackling.

WARNING –Do not attempt to remove or replace valves/tubes

whilst your Audion is in operation, as by so doing you could

destroy the amplifiers circuitry –risk electrical shock to yourself

and invalidate your Audion’s warranty.

Installation

Positioning Your Audion

You will probably have in mind the location to place your Audion

but remember, valves/tubes get warm and need a good circulation

of air.

Connecting

Your Audion is supplied with a power cord for your country of

operation. However we recommend connecting your input and

loudspeaker cables prior to connecting the power cord.

GND GNDRIGHT LEFT

OUTPUTS

POWER

OFF

H.T.

fuse Ground

lift

Audion Silver Night Stereo Amplifier Rear Panel Layout

Revision 1.02Silver Night -6 -Audion International

INPUTS

1234

TAPE

GND GNDRIGHT LEFT

OUTPUTS

POWER

OFF

H.T.

fuse Ground

lift

Audion Silver Night Integrated / Remote Amplifier Rear Panel

1INPUT

H.T.

fuse 1 42 3

OUTPUTS

Ground

lift

POWER

Off

Audion Silver Night Mono-block Amplifier Rear Panel

First connect audio input leads to the input RCA connectors. In the

case of the integrated / remote models,connect all audio input

leads. The top white sockets are for the Left input(s) the bottom

red sockets are for the Right channel(s).

Next,connect the loudspeaker cables to your Audion. For all

Stereo models the left and right channels are marked by red/black

colouring and also ground & channel name; ie left, right etc. Your

loudspeaker cables should be of a suitable quality and connect to

the corresponding red/black binding posts of the loudspeaker. To

achieve the best from your Audion we recommend that your

loudspeakers have an efficiency of 89 db or higher.

Unless ordered specifically all the above models come with an 8

ohm output. The Mono-block Amplifiers come with 2 x 8 ohm

outputs marked 2 x black & 2 x red. These are designed for “Bi-

amping”.

Revision 1.02Silver Night -7 -Audion International

The ground lift switch is used to effectively reduce a ground

feedback loop and hence noise from some installations.

Finally connect the power cord to a mains electricity supply.

Before proceeding –Are all the connections fitted correctly and

securely tightened?

Finally Check again –make sure everything is correct.

Using your Audion

Congratulations you are now ready to switch your Audion on. But

first we recommend turning the volume control on the front panel

anti-clockwise to zero. On the rear panel locate the on/off button.

Push the button downwards to position 1, this has now turned your

Audion on. You will notice if everything has been installed correctly

that your valves/tubes are starting to glow, your Audion is now

“Warming up”. We recommend that an initial few minutes is

allowed for the warm up process to take place. A valve/tube will

change its audio characteristics slightly once it has reached its

nominal operating temperature.

Select your sound source, CD, record, etc. and play. Once your

source has started playing adjust the volume control to your

required level.

On the Integrated model, the five switches correspond to the five

inputs on the rear and can be switched in and out accordingly.

MUTE

1 2 3 4 5

Audion Silver Night Integrated Amplifier Front Panel

Revision 1.02Silver Night -8 -Audion International

The remote model has three buttons –Up, Down and Record. The

up and down buttons change inputs from 1 to 5 and the Record

button allows recording via RCA pair No. 6.

In general use your Audion should give many years of trouble free

use. The anodised aluminium chassis should be wiped regularly

with a clean lint free cloth to remove dust. Under no circumstances

should solvent or solvent based products be used on or near your

Audion.

Please remember to fill in and return your warranty registration

form to us at the address at the end of this manual.

Enjoy your Audion.

Revision 1.02Silver Night -9 -Audion International

Technical Specifications

Stereo Mk 1

Power: 2 x 7 Watts Class A into 8 Ohms at 240V AC Load: 4 –16 Ohm Nominal

Distortion @ 1Watt: <0.1% No Feedback Frequency Response: 20 –24KHz ±3 db