Audio Technica ATH-SR30BT Manual de usuario

User Manual

Wireless Headphones

ATH-SR30BT

Notes on use

• Be sure to read the connected device’s user manual before

use.

• Audio-Technica will not be liable in any way for any loss of

data in the unlikely event that such losses should occur

while using the product.

• On public transportation or in other public places, keep the

volume low so as not to disturb other people.

• Minimize the volume on your device before connecting

theproduct.

• When using the product in a dry environment, you may

feel a tingling sensation in your ears. This is caused by

static electricity accumulated on your body, not by product

malfunction.

• Do not subject the product to strong impact.

• Do not store the product in direct sunlight, near heating

devices, or in hot, humid, or dusty places. Additionally, do

not allow the product to get wet.

• When the product is used for a long time, the product may

become discolored due to ultraviolet light (especially direct

sunlight) and wear.

• Make sure to hold the plug when connecting and

disconnecting the USB charging cable. The USB charging

cable may become severed or an accident may occur if

you pull on the cable itself.

• When you are not using the USB charging cable,

disconnect it from the product.

• If the product is placed in a bag while the USB charging

cable is still connected, the USB charging cable may

become caught, severed, or broken.

• This product can be used to talk on the phone only when

using a mobile telephone network. Support for telephony

apps that use a mobile data network is not guaranteed.

• If you use the product near an electronic device or

transmitter (such as a mobile phone) which is not

connected with the product, unwanted noise may be

heard. In this case, move the product away from the

electronic device or transmitter.

• If you use the product near a TV or radio antenna, noise

may be seen or heard in the television or radio signal. In

this case, move the product away from the TV or radio

antenna.

• To protect the built-in rechargeable battery, charge it at

least once every 6 months. If too much time passes

between charges, the life of the rechargeable battery may

be reduced, or the rechargeable battery may no longer be

able to be charged.

For a more comfortable Bluetooth® communication experience

The effective communication range of this product varies

depending on obstructions and radio wave conditions.

For a more enjoyable experience, please use the product as close

as possible to the Bluetooth device. To minimize noise and sound

disruptions, avoid placing your body or other obstacles between

the product’s antenna (L side) and the Bluetooth device.

Antenna

Part names and functions

■Accessory

• USB charging cable

(30 cm (12"))

Slider

Headband

L/R (left/right)

indicator

Earpad

Joint

Arm

Housing

A microphone is built into

the L (left) side housing.

Volume buttons

Adjust the volume using

+ and –.

Indicator lamp

Displays the operating status and

battery level of the product.

Battery jack

Use to connect the

included USB charging

cable and charge the

product.

Power switch

Turns the power on

and off.

Control button

Use to play/pause music

and answer/end phone

calls.

Charging the battery

• Fully charge the battery when using for the first time.

• When the rechargeable battery is running low, the product will beep through the headphones, and an indicator lamp

will flash in red 3 times every 4 minutes. In this case, charge the battery.

• It takes about 4 hours maximum to charge the battery fully. (This time may vary depending on usage conditions.)

• While charging the battery, the product's Bluetooth connection remains disabled and therefore the product cannot be

used.

1. Connect the included USB charging cable (Micro USB Type-B side) to the battery jack.

• The included USB charging cable is designed for exclusive use with the product. Do not use other cables to

charge the product.

• When inserting the USB charging cable into the USB port or battery jack,

check that the connector is facing in the correct direction before inserting it directly (horizontally).

2. Connect the included USB charging cable (USB Type-A side) to the computer to start charging.

• While charging, the indicator lamp lights as follows (it may take several seconds for the indicator lamp to light).

Lit in red: Charging

Off: Charging complete

3. When charging is complete, disconnect the USB charging cable (USB Type-A side) from the computer.

4. Disconnect the USB charging cable (Micro USB Type-B) from the product's battery jack.

USB port

Computer Type-A

USB charging cable

(included) Micro USB Type-B

Battery jack

Connecting via Bluetooth wireless technology

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.

• Place the device within 1 m (3.3') of the product to perform pairing correctly.

• To confirm the progress of the pairing process, wear the product while performing this procedure and listen for the

confirmation tone.

1. Starting with the product turned off, slide the power switch to the “ON” position.

• The indicator lamp will light in white, and then flash.

2. Use your Bluetooth device to begin the pairing process and search for the product.

When your Bluetooth device finds the product, "ATH-SR30BT" will be displayed on the device.

• For information about using your Bluetooth device, refer to the device’s user manual.

3. Select "ATH-SR30BT" to pair the product and your Bluetooth device.

• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also

be called a passcode, PIN code, PIN number, or password.

• The product sounds a confirmation tone when pairing is complete.

About pairing

When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the

product are paired, you do not need to pair them again.

However, in the following cases you will need to pair again even if the Bluetooth device was paired once:

• If the product is deleted from the Bluetooth device’s connection history.

• If the product is sent out for repair.

• If 9 or more devices are paired.

(This product can save the pairing information of up to 8 devices. When you pair with a new device after pairing with

8 devices, pairing information for the device with the oldest connection date will be overwritten by the information for

the new device.)

• When switching Bluetooth devices, you may be unable to pair

because the previously connected Bluetooth device cannot be

disconnected. In this case, press and hold the volume buttons (+ and

-) as shown in the figure for about 6 seconds. The product will start

“searching for devices” and you can pair Bluetooth devices that you

want to connect.

100%12:00

Bluetooth ON

ATH-SR30BT

To connect the product to a Bluetooth device, the product needs to pair (register) with the device.

Using the product

The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc.

Use the product for whichever of these purposes suits your needs.

Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications

via Bluetooth devices.

Power supply ON/OFF

Wearing the product

Power

supply Power switch operation Indicator lamp

ON Lights in white, then flashes in white *1*2

OFF Lights in white, then turns off*2

*1 It may take several seconds for the indicator lamp to light.

*2 For details, refer to “Indicator lamp display” (p. 10).

Put the side of the product marked “L” (LEFT) onto the left ear

and the side marked “R” (RIGHT) onto the right ear, slide the

slider up and down so that the earpads cover the ears, and then

adjust the headband.

Swivel mechanism

You can fold the housing so that it lies flat. After folding it flat, you can also fold the housing inside the headband.

• The swivel mechanism cannot rotate more than 90 degrees. Do not apply excessive force.

Joint

Using the product

Listening to audio

• To connect for the first time, pair the product and your device via Bluetooth wireless technology. If you have already

paired the product and your Bluetooth device, turn on the Bluetooth device’s Bluetooth connection before turning on

the product.

• Use your Bluetooth device to start playback, referring to the device’s user manual as necessary.

Control button

Press Play/pause Plays or pauses music.*1

Press and hold The speech recognition function (such as Siri, which is installed on iOS devices) may start

depending on the connected device.

Volume buttons

+ button

Press Volume up Increases the volume by 1 level.*2

Press and hold

(for about 2 seconds) Skip forward Plays the next track.*1

- button

Press Volume down Decreases the volume by 1 level.*2

Press and hold

(for about 2 seconds) Skip back Plays the previous track.*1

*1 Some controls may not be available for music on some smartphones.

*2 A beep is heard when the volume is at the maximum or minimum level.

• The volume control of some devices may not work well with the product.

Compact folding

You can fold the housing into the inner side of the headband using the joints at the fulcrum.

• Be careful so as not to get your fingers caught in the joints.

• When using the product, make sure to return the housing to the original position.

Joint Fold

Using the product

Reset function

If the product does not work or other malfunctions occur, refer

to “Charging the battery” (p. 5) for information on inserting

the USB charging cable to provide power, and then do a reset.

Disconnecting and then reconnecting the USB charging cable

will reset the product and should resolve any problem you are

experiencing. If the problem persists, contact your local Audio-

Technica dealer.

Resetting does not change any of your settings (pairing

information, volume setting, etc.).

Talking on the phone

• If your Bluetooth device supports telephone features, you can use the microphone built into the product to talk on the

phone.

• When your Bluetooth device receives a phone call, the product sounds a ring tone.

• If a call is received while you are listening to music, music playback is paused. When you finish the call, music

playback resumes.*

When Operation Function

Receiving

a call

Press the control button. Answers the call.

Press and hold the control button (for about 2

seconds). Rejects the call.

Talking on

a call

Press the control button. Ends the call.

Press and hold the control button (for about 2

seconds).

Each time you press and hold the button (about 2

seconds), you switch the call to your mobile phone or

to the product.

Press a volume button (+ or -). Adjusts the volume (+ or -) of the call.

* Depending on your Bluetooth device, music playback may not resume.

• The phone call controls explained above may not be available on some smartphones.

Auto power o function

The product automatically turns off after 5 minutes of not being connected to a device that has its power turned on.

Micro USB Type-B

Battery jack

Indicator lamp display

The indicator lamp of the product indicates the product's status as explained below.

Status Indicator lamp display pattern Red White

Pairing Searching for device Flashing every 0.5 seconds

Connection

Waiting to be

connected

Flashing twice every 4

seconds

Connecting Flashing every 3 seconds

( : gradually lights up)

Battery

level Battery level low Flashing 3 times every 4

minutes

Charging

Charging Lit

Fully charged Off

The product provides English voice guidance in the following situations.

Situation Voice guidance

Power is turned on Power on

Power is turned off Power off

Bluetooth is connected Bluetooth connected

Bluetooth is disconnected Bluetooth disconnected

Battery level low Low battery

About voice guidance

Cleaning

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint

thinners or other solvents for cleaning purposes.

• To clean, wipe with a dry cloth.

• Wipe away dirt from the earpads and headband with a dry cloth. Sweat or water on the earpads and headband may

cause the colors to fade. In this case, we recommend that you wipe them with a dry cloth and dry them out of direct

sunlight.

• If the product will not be used for an extended period of time, store it in a well-ventilated place free from high

temperatures and humidity.

• Earpads are consumable parts. Replace them when necessary as they will deteriorate through storage and use.

Contact your local Audio-Technica dealer for earpad replacement or other repairs.

Otros manuales para ATH-SR30BT

Tabla de contenidos

Otros manuales de Auriculares inalámbricos de Audio Technica

Audio Technica

Audio Technica ATH-SPORT60BT Manual de usuario

Audio Technica

Audio Technica ATH-ANC900BT Manual de usuario

Audio Technica

Audio Technica ATH-SR30BTGY Manual de usuario

Audio Technica

Audio Technica ATH-SQ1TW2 Manual de usuario

Audio Technica

Audio Technica ATH-S200BTBK Manual de usuario

Audio Technica

Audio Technica ATH-C200BTBK Manual de usuario

Audio Technica

Audio Technica ATH-CKS50TW Manual de usuario

Audio Technica

Audio Technica ATH-CKS55XBT Manual de usuario

Audio Technica

Audio Technica ATH-CKS990BT Manual de usuario

Audio Technica

Audio Technica ATH-ANC300TW Manual de usuario

Audio Technica

Audio Technica ATH-M20 series Manual de usuario

Audio Technica

Audio Technica ATH-CKS30TW Manual de usuario

Audio Technica

Audio Technica ATH-CK3TW Manual de usuario

Audio Technica

Audio Technica ATH-AR5BT Manual de usuario

Audio Technica

Audio Technica ATH-CK200BT Manual de usuario

Audio Technica

Audio Technica ATH-M50xBT2 Manual de usuario

Audio Technica

Audio Technica ATH-WS660BT Manual de usuario

Audio Technica

Audio Technica ATH-SPORT50BT Manual de usuario

Audio Technica

Audio Technica ATH-WS990BT Manual de usuario

Audio Technica

Audio Technica ATH-TWX7 Manual de usuario

Audio Technica

Audio Technica ATH-CKS50TW Manual de usuario

Audio Technica

Audio Technica ATH-CKR300BT Manual de usuario

Audio Technica

Audio Technica ATH-WB2022 Manual de usuario

Audio Technica

Audio Technica ATH-CKR70TW Manual de usuario

Manuales populares de Auriculares inalámbricos de otras marcas

Audity

Audity Infinite Manual de usuario

Bowers & Wilkins

Bowers & Wilkins PI4 Manual de usuario

Niceboy

Niceboy Hive Sport 2 Manual de usuario

Aiwa

Aiwa HST-250BT Manual de usuario

Sennheiser

Sennheiser TR 185 Manual de usuario

JBL

JBL DUET Arc Manual de usuario

UNDER ARMOR

UNDER ARMOR UA STREAK Manual de usuario

Krüger & Matz

Krüger & Matz Play Manual de usuario

JLab Audio

JLab Audio FLEX Manual de usuario

Bang & Olufsen

Bang & Olufsen Beoplay 500 Manual de usuario

Mixx

Mixx StreamQ C1 Manual de usuario

Srhythm

Srhythm NiceComfort 75 Manual de usuario

MOB

MOB MO6249 Manual de usuario

Skullcandy

Skullcandy Uproar Manual de usuario

JBL

JBL Everest 310 Manual de usuario

Pioneer

Pioneer SE-E8TW Manual de usuario

Harman

Harman JBL TUNE 500BT Manual de usuario

JVC

JVC HA-Z77T Guía del usuario