Audio Technica ATR2500x-USB Manual de usuario

ATR2500x-USB

Cardioid Condenser USB Microphone

User Manual

Contents

Introduction & features 2

Setting up your microphone with pivot mount & desk stand 3

Preliminary setup with MacOS Mojave 4

Advanced setup with MacOS Mojave 7

Preliminary setup with Windows 10 9

Advanced setup with Windows 10 11

Using headphones 15

Selecting software 15

Setting your software levels 15

Positioning your microphone 15

Protecting your microphone 15

Specifications 16

Warranty 17

Thank you for buying the Audio-Technica ATR2500x-USB cardioid condenser microphone. Designed for computer-

based recording, this microphone is ideal for digitally capturing music or any acoustic audio source using your favorite

recording software.

Equipped with a USB output for easy connection to your computer, the ATR2500x-USB offers studio-quality

articulation and intelligibility perfect for home studio recording, field recording, podcasting, and voice over use.

The ATR2500x-USB also features a built-in headphone jack with volume control that allows you to directly monitor

your microphone’s output during recording. The microphone’s focused pickup pattern delivers excellent off-

axis rejection, while its A/D converter with up to 24-bit, 192 kHz sampling rate ensures clear, articulate sound

reproduction.

Audio-Technica’s state-of-the-art design and manufacturing techniques ensure that the microphone complies with the

company’s renowned consistency and reliability standards.

Features

• Side-address condenser microphone with USB output for easy connection to your computer

• Ideal for podcasting, home studio recording, field recording, and voice over use

• Built-in headphone jack lets you monitor directly from the microphone

• Controls on the front of the microphone allow you to easily adjust headphone volume

• High-quality A/D converter with up to 24-bit, 192 KHz sampling rate

• Compatible with Windows and Mac

• Low-mass diaphragm provides excellent frequency response

• Cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear,

improving isolation of desired sound source

• Low self-noise – ideally suited for digital recording

• Sturdy tripod desk stand with folding legs is easy to set up and transport

• Pivoting, threaded stand mount attaches securely to a conventional microphone stand

• Durable metal construction for long-lasting performance

• Includes two 2 m (6.6') cables: USB-C to USB-C, USB-C to USB-A

Compliance with FCC rules (USA only)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC WARNING

You are cautioned that any changes or modifications not expressly approved in this manual could void your

authority to operate this equipment.

Canada only

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB -003 du Canada.

ATR2500x-USB Setup

For desktop use

Screw the microphone into the threaded portion of

the tripod desk stand. The front of the microphone

should face the A-T logo. Extend the tripod legs to

provide a wide, secure base, and place the tripod

desk stand on a flat surface.

For mic stand use

Screw the microphone stand clamp to your mic

stand. Screw microphone into the stand clamp.

Use a screwdriver or coin to loosen/tighten the

stand’s pivot screws for angle adjustment.

Plug one of the provided USB cables into the USB

output at the base of the microphone then connect

the other end of the cable to your digital recording

device.

When connecting the microphone to a USB-C port,

you must use a USB On-The-Go (USB OTG) cable

like the one included.

When using with equipment that includes a

built-in mic, consult that device’s user guide for

instructions on disabling its mic.

Optional headphone monitoring: Connect

headphones with 3.5 mm (⅛") plug into front of

microphone. Use up/down buttons for volume

control.

USB-CUSB-A

Stand clamp

Tripod desk stand

Headphone volume

3.5 mm (⅛") headphone jack

NOTICE Regarding MacOS Catalina

With the release of MacOS Catalina, Apple has introduced restrictions on using non-Apple software. Unless the recording

application is ocially supported to run under MacOS Catalina, you will not be able to access the microphone even if it

shows up as a sound input device!

If you are using an older version of MacOS, your computer will automatically recognize the USB device

and install the appropriate driver.

If you are using MacOS Mojave, you must enable software access to the microphone, using the security and privacy settings.

1. Connect the ATR2500x-USB microphone to an open USB port on the Mac (Type A or Type C).

Open the system preferences by clicking the Apple logo in the upper left corner of the menu bar and selecting

System Preferences. Alternatively, you can click on the gear icon in the dock. Click the Loudspeaker icon to open

the sound preferences.

2. By default the Mac selects the internal microphone as the sound input device. When the ATR2500x-USB is

plugged in, the Mac assumes that it is the desired input device and automatically selects it.

Verify that the ATR2500x-USB is highlighted.

The input volume for the microphone can be adjusted by moving the input slider and watching the level meter

while speaking into the microphone. Setting the level too low will not provide enough input signal to your

recording application. Setting it too high can overload the input to the recording application resulting in clipping or

distortion.

Note: The output volume slider controls the Mac’s speaker or headphone jack output and does not affect the input

sound level. This slider replicates the volume control associated with the small speaker icon in the menu bar and

the volume controls on the keyboard.

Preliminary setup with MacOS Mojave

Click the Apple Logo and select System Preferences Click the Loudspeaker icon to open the

sound preferences

3. Because the ATR2500x-USB Microphone has a built-in headphone output, the Mac selects it as the output device.

Should you desire to use the internal speakers for playback audio, click the Output tab and choose the desired

output device.

The balance control sets the left to right balance in the output device.

The Output volume controls the playback level from the Mac. It is the same as clicking on the small speaker icon in

the menu bar and adjusting volume or using the keyboard controls.

Preliminary setup with MacOS Mojave (continued)

With recent updates to MacOS Mojave and the latest MacOS Catalina, Apple implemented a privacy setting

allowing you to control which apps have access to the microphone.

If you are using MacOS Mojave, you must enable software access to the microphone, using the security and privacy settings.

1. In order to use the ATR2500x-USB microphone with certain applications you need to verify that the apps are

enabled to have access to the microphone.

Open the system preferences and click on the Security and Privacy icon.

2. To make changes, you will need to unlock the padlock on the Security and Privacy window by entering your user

name and password.

Scroll down to make certain the apps you want to use the microphone with are enabled. If not, use the switch slider

associated with the App to turn it on.

3. Click the microphone icon and verify that a check mark appears next to the applications that need

access to the microphone.

Make certain to click the lock to lock it after making the changes.

Preliminary setup with MacOS Mojave (continued)

Advanced Sound Settings

1. At this point the Mac is set up to use the ATR2500x-USB microphone as the input device and your selection as

the output device. The sample rate is set for the default value (44.1 KHz CD Quality). However, additional settings

are available that enable you to change the audio sampling rate and individually adjust left and right input signal

levels if you desire.

To access these settings, open a new finder window and navigate to “Applications—Utilities” and double-click the

Audio MIDI Setup application.

Advanced setup with MacOS Mojave

Audio MIDI Setup

2. A list of audio devices appears on the left side and the adjustable settings for the selected device appear on the right.

The ATR2500x-USB appears as two separate devices. One is an input device (2 ins / 0 outs) while the other

represents its output (0 ins / 2 outs).

Clicking the input device (2 ins / 0 outs) shows the current settings.

The Format section contains the sample rate settings.

The Master Stream section allows you to individually adjust the microphone signal levels for the

left and right audio inputs.

Select input version ATR2500x-USB with 2 ins / 0 outs

3. The ATR2500x-USB is capable of very high-quality recording and supports sample rates of up to 192 KHz. In some

situations higher sample rates can provide better results. However, as the sample rate increases, the file size

becomes much larger.

If you are recording voice-overs for video or music that will be synchronized with video, the default sample rate

needs to be changed from 44.1 KHz to 48 KHz.

To change the sample rate, click the drop-down arrows next to the Format box. A sub window opens listing

available sample rates. Click on the desired one to choose it and close the sub-window.

Remember that the selected sample rate must match the value set in your recording application or you will hear

pops and clicks in the recorded audio.

Advanced setup with MacOS Mojave (continued)

If you are using an older version of Windows, your computer will automatically recognize the USB device

and install the appropriate driver.

The first time you plug the microphone in, you may see a message that new hardware has been found, or you may

see a driver software installed notice. After the first time, you will not see any of these as the computer has already

installed the necessary drivers for a USB microphone.

When the ATR2500x-USB microphone is connected, Windows 10 will automatically select it as the input

and output device.

1. To verify or make changes click the Start window and click settings (the gear).

2. When the settings window opens, Click “System.”

Preliminary setup with Windows 10

Preliminary setup with Windows 10 (continued)

4. The Sound tab opens showing the active input and output device which should be the USB microphone.

To use the computer speakers as your output device, click “Choose your output device” and in the drop-down

menu choose the desired item.

3. When the System window opens, in the left column, click “Sound.”

At this point, your computer is set up to use the ATR2500x-USB microphone as the audio input device and whatever

you chose as the audio output device. However, in the recent versions of Windows 10, Microsoft has instituted some

additional privacy settings, allowing users to control which apps and programs have access to the microphone. Refer

to the section on privacy for more information.

There are additional settings available for the microphone, allowing you to set the input level, change the sampling

rate and manage other aspects of the audio. Refer to the next section for more details.

Otros manuales para ATR2500x-USB

Tabla de contenidos

Otros manuales de Micrófono de Audio Technica

Audio Technica

Audio Technica MICROLINE AT933RX/ML Instrucciones de funcionamiento

Audio Technica

Audio Technica ARTIST ELITE AE5100 Manual de usuario

Audio Technica

Audio Technica AT4050/LE Manual de usuario

Audio Technica

Audio Technica ATW-2110 Manual del propietario

Audio Technica

Audio Technica ATW-C3300 Manual de usuario

Audio Technica

Audio Technica ES925ML6/XLR Manual de usuario

Audio Technica

Audio Technica ATR1500x Manual de usuario

Audio Technica

Audio Technica ARTIST Series Manual de usuario

Audio Technica

Audio Technica AT880b Manual de usuario

Audio Technica

Audio Technica AT829cW Manual de usuario

Audio Technica

Audio Technica Engineeredsound ES947C/TB3 Manual de usuario

Audio Technica

Audio Technica ES935C6 Manual del propietario

Audio Technica

Audio Technica AT8175 Manual de usuario

Audio Technica

Audio Technica AT2005USB Manual de usuario

Audio Technica

Audio Technica ATND971 Manual de usuario

Audio Technica

Audio Technica Midnight Blues MB4000C Manual

Audio Technica

Audio Technica ATW-C6100 Manual de usuario

Audio Technica

Audio Technica UniPlate AT851RWx Manual de usuario

Audio Technica

Audio Technica AT854R Manual de usuario

Audio Technica

Audio Technica ES935SML6 Manual del propietario

Audio Technica

Audio Technica ES935ML6 Manual de usuario

Audio Technica

Audio Technica AT2020 Manual de usuario

Audio Technica

Audio Technica ATND1061LK Manual de usuario

Audio Technica

Audio Technica AT2050 Guía de instalación

Manuales populares de Micrófono de otras marcas

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manual de usuario

DAPAudio

DAPAudio RM-101 Manual de usuario

AKG

AKG CHM 21 Manual de usuario

Sennheiser

Sennheiser evolution wireless series EM 100 Manual de usuario

Sony

Sony C-48 Manual de usuario

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manual de usuario

Shure

Shure WH30TQG Manual de usuario

auna PRO

auna PRO MIC-900 Manual de usuario

AKG

AKG D 3800 Manual de usuario

Shure

Shure KSM141 Manual de usuario

MAIIN SOUND

MAIIN SOUND IIN style Manual de usuario

Earthworks

Earthworks TC25 Manual de usuario

Sennheiser

Sennheiser evolution D1 Manual de usuario

Alesis

Alesis MicLink Wireless Manual de usuario

DSPPA

DSPPA D6234 Manual de usuario

Monacor

Monacor IMG STAGELINE ECM-300B Manual de usuario

Ansr Audio

Ansr Audio Scan16 Manual de usuario

Shure

Shure MXA710 Series Manual de usuario