Audio Technica ATND1061LK Manual de usuario

ATND1061LK

ATND1061DAN

Beamforming Array Microphone

User Manual

- Digital Microphone Manager Edition -

English

Table of Contents

Tableof Contents

Digital Microphone Manager 5

What is Digital Microphone Manager? 5

Supported models & recommended environments 5

Installing Digital Microphone Manager 5

Examples of product uses 6

Connecting Digital Microphone Manager and microphone 8

Connecting microphones 8

If you cannot connect with the microphone 8

About firewall settings 8

Launching Digital Microphone Manager 10

Actions possible using the top menu screen 10

Creating new projects 11

Overview of the project screen 13

Actions possible using the main menu 14

Room settings 15

Displaying the grid 15

Turning the grid ON and OFF 15

Changing grid display settings 15

Laying out images 16

Turning image displays ON and OFF 16

Importing image files 16

Setting image opacity 17

Setting image position and angle 18

Setting the image size 19

Setting the room size and offset 20

Changing the room view level 21

Changing the zoom level of the main area 22

Adding and connecting microphones 24

Adding an offline microphone 24

Adding an online microphone 24

Deleting a microphone 26

Overview of the device list 26

Actions possible in the device list menu 27

Connecting a microphone 28

Microphone settings 31

Overview of the microphone settings screen 31

Setting microphone display colors 33

Setting the microphone position and direction 34

Setting the microphone’s elevation exclusion angle 35

Table of Contents

Locking a microphone 36

Presets 37

Saving presets 37

Recalling presets 39

Beam zone settings 41

Setting a Coverage Zone 41

Adding a Coverage Zone 41

Deleting a Coverage Zone 43

Locking a Coverage Zone 43

Setting the audio input level for a Coverage Zone 44

Setting a Priority Zone 45

Adding a Priority Zone 45

Deleting a Priority Zone 47

Locking a Priority Zone 47

Changing audio output channels 48

Setting the audio input level for a Priority Zone 49

Setting an Exclusion Zone 50

Adding an Exclusion Zone 50

Deleting an Exclusion Zone 52

Locking an Exclusion Zone 52

Zone layout presets 53

Saving zone layout presets 53

Recalling zone layout presets 55

Position markers 56

Adding a position marker 56

Deleting a position marker 58

Audio settings 60

Displaying the audio settings screen 60

Overview of the audio settings screen 60

Adjusting the gain 61

Setting low-cut 61

Setting the 4-band EQ 62

Adjusting the 4-band EQ 62

Adjusting in easy mode 62

Adjusting in expert mode 64

Checking the status of auto mix 65

Setting auto mix 66

Setting AGC 67

Setting AEC 68

Setting NC 69

Table of Contents

Turning the mute ON/OFF 70

Adjusting the input and output levels 70

Setting Analog Input types 71

Turning phantom power for the Analog Input ON or OFF 72

Setting the unity level for the Analog Output 72

Setting channel names and colors 73

Copying audio settings 74

Reset audio settings 75

Camera Area settings 77

Adding a Camera Area 77

Deleting a Camera Area 79

Locking a Camera Area 79

Setting groups 80

Using the camera linking function 81

System connection examples 81

Cameras with confirmed compatibility 82

Command list (Panasonic protocol) 83

Command list (VISCA over IP) 83

How to connect 84

Pausing the camera linking function 84

Settings & Maintenance 85

Basic operations on Settings & Maintenance screen 85

General (System Settings) 86

Device Name 86

Command Link 87

GPI Settings 87

Include in Setting file 87

Network (System Settings) 87

Dante Network Configuration 87

Dante & Audio Port Settings 88

IP Control & Web Remote Port Settings 88

Allow Discovery 88

IP Control Settings 89

Include in Setting file 89

Audio (System Settings) 89

Beam Settings 89

Dante Tx#6 Signal 90

LED (System Settings) 90

LED Settings 90

LED Dimmer 90

Table of Contents

IR Receiver (System Settings) 90

Allow Control 90

Utilities (System Settings) 91

Firmware Update 91

Reset All Settings to Default 91

Presets 92

Exporting presets 92

Importing presets 93

Camera 95

Device 95

Talk Setting 95

Silent Setting 95

Logging 95

System Info 96

Software application settings 97

Basic operations on the Settings screen 97

Settings (APP Settings) 98

Auto Reconnect 98

Page Settings 99

File Location 99

4 Band EQ Library (Presets) 99

Changing an EQ preset name 99

Exporting an EQ preset/library 100

Importing an EQ preset/library 101

Zone Layout Library (Presets) 102

Changing a zone layout preset name 102

Exporting a zone layout preset/library 103

Importing a zone layout preset/library 103

Auto mix settings for connecting multiple units (ATND1061DAN) 105

Digital Microphone Manager settings 105

Dante Controller settings 107

Signal system example 109

Auto mix settings for connecting multiple units (ATND1061LK) 110

Gain sharing 110

Forced update 111

Error message list 112

Trademarks 113

Digital Microphone Manager

What is Digital Microphone Manager?

Digital Microphone Manager is a software application that supports the operation of digital microphones (supported

models) from Audio-Technica. It enables users to create projects, configure microphone and audio settings, as well as

set a microphone coverage range that suits the layout of rooms where microphones are actually installed. It also enables

users to perform real-time editing and display talker positions in an online environment, a useful feature for on-site

adjustments of advanced settings.

Supported models & recommended environments

Digital Microphone Manager is designed for use with computers. It cannot be used with tablets or smartphones.

Item Description

Supported models ATND1061LK

ATND1061DAN

Supported OS Microsoft Windows 10, 11

Recommended display resolution 1280 × 720 or higher

Installing Digital Microphone Manager

1Download Digital Microphone Manager to your computer.

The installer can be downloaded from the Audio-Technica website (https://www.audio-technica.com/) for the

country or region where used.

2Double-click the downloaded “DigitalMicrophoneManager-X.X.X-Setup.exe”.

3Follow the instructions displayed on the setup wizard to install Digital Microphone Manager.

.Net Core 3.1 Runtime must be installed on the computer being used. Follow the on-screen instructions to

install the software when the installation confirmation screen appears.

Examples of product uses

For example, a user could create presets and projects offline based on design plans before performing actual work at the

microphone installation site. Once created, the user could then connect Digital Microphone Manager to the network at

the installation site, synchronize it with microphones, and finely adjust each setting while monitoring live sound.

1Create a new project.

Open a new project and set the room size.

For details, see "Creating new projects" (p. 11).

2Create a room.

Set a grid display that can be used as a reference when performing microphone layout.

Load images (e.g., drawings of the room layout) that can be used as a reference for microphone placement

and beam zone settings.

For details, see "Room settings" (p. 15).

3Layout microphones.

Add microphones offline and perform settings such as for their position, direction, or elevation exclusion

angle.

For details, see "Adding and connecting microphones" (p. 24) and "Microphone settings" (p. 31).

4Set the beam zone.

Set Coverage Zones, Priority Zones, and Exclusion Zones.

For details, see "Beam zone settings" (p. 41).

5Set the sound quality for each channel.

For details, see "Audio settings" (p. 60).

6Perform auto mix settings.

For details, see "Setting auto mix" (p. 66).

7Perform system settings.

Perform settings (e.g., indicator lamp colors) related to microphone settings.

For details, see "Settings & Maintenance" (p. 85).

8Create presets.

For details, see "Presets" (p. 37).

9Establish network connections.

Perform network settings and connect to the network.

Examples of product uses

The microphone ships from the factory with “IP Config Mode” set to “Auto”. Set the computer to

automatically obtain IP address settings.

For details, see "Connecting Digital Microphone Manager and microphone" (p. 8).

10 Connect with a microphone.

Connect the microphones and synchronize microphone settings for the created project.

For details, see "Connecting a microphone" (p. 28).

11 Adjust settings by monitoring actual sound.

Adjust settings offline while monitoring microphone coverage and the quality of sound output from the

speakers.

Connecting Digital Microphone Manager and

microphone

Connecting microphones

1Set the computer to automatically obtain IP address settings.

2Connect the microphone and the computer on which Digital Microphone Manager is installed to the

same network.

The microphone ships from the factory with “IP Config Mode” set to “Auto”.

3Launch Digital Microphone Manager.

Depending on the operating system and security software being used, confirmation screens requesting

communication authorization may be displayed during setup. When these appear, authorize the

communication.

To connect using a static IP address, set “IP Config Mode” to “Static”.

If you cannot connect with the microphone

If you cannot connect with the microphone, check the following:

Digital Microphone Manager might not work properly due to the firewall or security software firewall of the computer

being used. In this case, check the firewall settings and authorize communication with Digital Microphone Manager.

Digital Microphone Manager uses IP multicast. Make sure that your multicast IP address/port number is not blocked

in your network environment.

To maintain stable connection to the microphone synced to Digital Microphone Manager, we recommend not

connecting to multiple networks. For example, if the microphone is connected with a wired LAN, disable the Wi-Fi

connection. If multiple networks are connected, the microphone may not be detected or the connection may be lost.

About firewall settings

1Click “Windows Security” from Start menu.

2Click “Firewall & network protection”.

3Click “Allow an app through firewall”.

4Confirm that check marks have been entered for all domain, private, and public items in Digital

Microphone Manager.

If check marks have not been entered, apply check marks for all items.

Connecting Digital Microphone Manager and microphone

5Click “OK”.

If Digital Microphone Manager is not listed, click “Allow another app” to add Digital Microphone Manager.

If it does not appear on the list, you need to specify a location. Specify a file in the following location:

C:\Program Files\Audio-Technica\Digital Microphone Manager

File name: DigitalMicrophoneManager.exe

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Micrófono de Audio Technica

Audio Technica

Audio Technica ATND971a Manual de usuario

Audio Technica

Audio Technica ATR1200x Manual de usuario

Audio Technica

Audio Technica UniPoint AT857AMLx Manual de usuario

Audio Technica

Audio Technica AT4050 Manual de usuario

Audio Technica

Audio Technica MICROLINE ES933PMML Manual de usuario

Audio Technica

Audio Technica ATM710 Manual de usuario

Audio Technica

Audio Technica M2 Manual de instrucciones

Audio Technica

Audio Technica AT3528 Manual de usuario

Audio Technica

Audio Technica AT835ST Manual de usuario

Audio Technica

Audio Technica ES935 Manual de usuario

Audio Technica

Audio Technica ATM250DE Manual de usuario

Audio Technica

Audio Technica Artist series ATM31 Guía de instalación

Audio Technica

Audio Technica PRO 3x Manual de usuario

Audio Technica

Audio Technica AT4055 Manual de usuario

Audio Technica

Audio Technica UniPoint AT859QMLx Manual de usuario

Audio Technica

Audio Technica ES961 Manual de usuario

Audio Technica

Audio Technica ES935SML6 Manual del propietario

Audio Technica

Audio Technica UNIPOINT U857Q Manual de usuario

Audio Technica

Audio Technica AT935QMRx Manual de usuario

Audio Technica

Audio Technica PRO 31QTR Manual de usuario

Audio Technica

Audio Technica AT831b Manual de usuario

Audio Technica

Audio Technica ES925H6/DS3 Manual de usuario

Audio Technica

Audio Technica AT831R Manual de usuario

Audio Technica

Audio Technica AT2020 USB Manual de instrucciones

Manuales populares de Micrófono de otras marcas

IK Multimedia

IK Multimedia iRig Stream MIC PRO Manual de usuario

DAPAudio

DAPAudio RM-101 Manual de usuario

AKG

AKG CHM 21 Manual de usuario

Sennheiser

Sennheiser evolution wireless series EM 100 Manual de usuario

Sony

Sony C-48 Manual de usuario

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Manual de usuario

Shure

Shure WH30TQG Manual de usuario

auna PRO

auna PRO MIC-900 Manual de usuario

AKG

AKG D 3800 Manual de usuario

Shure

Shure KSM141 Manual de usuario

MAIIN SOUND

MAIIN SOUND IIN style Manual de usuario

Earthworks

Earthworks TC25 Manual de usuario

Sennheiser

Sennheiser evolution D1 Manual de usuario

Alesis

Alesis MicLink Wireless Manual de usuario

DSPPA

DSPPA D6234 Manual de usuario

Monacor

Monacor IMG STAGELINE ECM-300B Manual de usuario

Ansr Audio

Ansr Audio Scan16 Manual de usuario

Shure

Shure MXA710 Series Manual de usuario