Audio Press Box APB-112 OW-D Manual de usuario

APB-112 OW-D

Press Conference Audio Distribution Amplifier

Owner’s manual

English

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages,

re or other hazards. These precautions include, but are not limited to, the following:

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property.

These precautions include, but are not limited to, the following:

Do not open

• Do not open the device or attempt to disassemble the internal parts or modify them in any

way. The device contains no user-serviceable parts. If it should appear to be malfunctioning,

discontinue use immediately and have it inspected by qualied AudioPressBox service

personnel.

Water warning

• Do not expose the device to rain, use it near water or in damp or wet conditions, or place

containers on it containing liquids which might spill into any openings.

• Never insert or remove an electric plug with wet hands.

WARNING

CAUTION

If you notice any abnormality

• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of

sound during use of the device, or if any unusual smells or smoke should appear to be

caused by it, immediately turn o the power switch, disconnect the electric plug from

the outlet, and have the device inspected by qualied AudioPressBox service personnel.

• If this device or the AC power adaptor should be dropped or damaged, immediately turn

o the power switch, disconnect the electric plug from the outlet, and have the device

inspected by qualied AudioPressBox service personnel.

Power supply/Power cord

• Remove the electric plug from the outlet when the device is not to be used for extended

periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold the plug itself

and not the cord. Pulling by the cord can damage it.

• To avoid generating unwanted noise, make sure there is 50cm or more between the AC

power adaptor and the device.

• Do not cover or wrap the AC power adaptor with a cloth or blanket.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such

as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of

panel disguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall over.

Connections

• Before connecting the device to other devices, turn o the power for all devices. Before

turning the power on or o for all devices, set all volume levels to minimum.

Handling caution

• When turning on the AC power in your audio system, always turn on the power amplier

LAST, to avoid speaker damage. When turning the power o, the power amplier should

be turned o FIRST for the same reason.

• Do not insert your ngers or hands in any gaps or openings on the device.

• Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or

openings on the device If this happens, turn o the power immediately and unplug the

power cord from the AC outlet. Then have the device inspected by qualied AudioPressBox

service personnel.

• Do not use the device or headphones for a long period of time at a high or uncomfortable

volume level, since this can cause permanent hearing loss. If you experience any hearing

loss or ringing in the ears, consult a physician.

• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive

force on the buttons, switches or connectors.

XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).

AudioPressBox cannot be held responsible for damage caused by improper use or modications to the device, or data that is lost or destroyed.

The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualied AudioPressBox service personnel about replacing defective

components.

Illustrations herein are for explanatory purposes only, and may not match actual appearance during operation.

Company names and product names herein are trademarks or registered trademarks of their respective companies.

Specications and descriptions in this owner’s manual are for information purposes only. AudioPressBox reserves the right to change or modify products or specications at any time without prior

notice. Since specications, equipment or options may not be the same in every locale, please check with your AudioPressBox dealer.

Dear customer,

Thank you for purchasing the AudioPressBox APB-112 OW-D.

APB-112 OW-D is an active AudioPressBox unit with one channel DANTE input, 12 transformer isolated outputs with switchable Mic/Line output level.

OW suffix means that the unit is designed for wall mounting. The unit is powered directly from Dante network via PoE. It is a PoE Class 3 device

The package contains:

1. APB-112 OW-D unit

2. Test report

Transformer

Individually transformer isolated outputs.

PoE powered (Class 3 device)

Features:

APB-112 OW-D

TRANSFORMER

12 x

Switchable Mic/Line output Level

for each output

1-channel Dante interface

APB-112 OW-D

1.) Mic/Line switch

Output level switch. You can individually

select nominal output level for each output.

Mic = -26dBu, Line = +6dBu

2.) Mic/Line outputs

Twelve Individually transformer isolated

balanced outputs with switchable output

level: MIC -26dBu, Line +6dBu. Standard

Neutrik 3-pin XLR connector

3.) Power LED

Indicates that the device receives PoE power

and is ready for use

4.) Output level indicator

Indicates the analog output level in dB. 0dB

is nominal output level which corresponds

to +6dBu (Line) or -26dBu (Mic) on outputs

5.) Dante connector

Standard RJ45 connector for connecting to

PoE and Dante network

245

Usage

APB-112 OW-D is designed for use as a distribution audio amplifier for press conferences. It features one

digital input from Dante network and twelve analog audio outputs with individual output level switch – MIC/LINE.

There is no signal processing inside. All desired processing should be done in other devices (e.g. mixing console or

DSP). So, the APB-112 OW-D is suitable for fixed installations with integrated Dante network.

For proper operation and to maintain declared parameters, it is necessary to drive the APB with the correct

signal level from Dante network. The nominal analog output level of APB is +6dBu which corresponds to -20dBFS

(FS = Full Scale) of digital signal on Dante network. So, we recommend to drive the APB with digital signals

somewhere between -30dBFS and -18dBFS. Also, it is very useful to drive the APB with a processed signal e.g. with

applied compressor and limiter to reduce the dynamics of the signal especially for speech.

Operations

For more information about Dante controller set up click on the following link:

www.audiopressbox.com/manuals/APB-112-OW-D

Connect the APB to Dante network

with PoE capability

APB-112 OW-D is a PoE Class 3 device, so it

can be powered from a basic PoE

Make the Dante signal routing

APB is set by default to obtain IP

address from DHCP server.

In Dante network you will see the APB as:

APB112OW-D-serialnumber. You can change it

in Dante controller software. In this software

you can also route the signal to APB

Set up the levels

Set up the output level on your source device

to reach the nominal output on APB – 0dB LED

on Output Level indicator. You can also set the

output level switch for each output as desired

– Mic or Line

APB is ready to use!

Installation

APB-112 OW-D is designed for “On Wall” installation.

1.) Unscrew 4 screws on top panel

2.) Release the back panel

3.) Screw it to the wall, the wall may be

from concrete, stud, wood… Please use

suitable mounting method for your type

of wall material

4.) Connect the RJ-45 cable to APB

5.) Screw the APB to the back plate

Specications

Audio Press Box APB-112 OW-D

Type 1in 12out

Groups 1

Input section

Inputs 1

Input type digital, Dante

Input connector RJ-45

Output section

Outputs 12

Output type analog

Output Level switchable – Mic: -26dBu, Line: +6dBu

Maximum Output Level +20dBu (no load)

+14dBu (600Ohm)

Output impedance MIC: 220 Ohm LINE: 600 Ohm

Output connector Neutrik 3-pin XLR, male

Output isolation Transfomer for each output

SNR >70dB (nominal output)

THD+N < 0,05% 1kHz < 0,1% 100Hz

Frequency response 20Hz to 20kHz /-3dB

Indicators Power, Output level

Power supply PoE, Class 3

Dimensions (WxHxD) 280x138x50 mm

Weight 2750 g

Block diagram

Tabla de contenidos

Otros manuales de Amplificador de Audio Press Box

Audio Press Box

Audio Press Box APB-116SB Manual de usuario

Audio Press Box

Audio Press Box APB-416 C Manual de usuario

Audio Press Box

Audio Press Box APB-400R Manual de usuario

Audio Press Box

Audio Press Box APB-448 SB Manual de usuario

Audio Press Box

Audio Press Box APB-116P Manual de usuario

Audio Press Box

Audio Press Box APB-124 SB Manual de usuario

Audio Press Box

Audio Press Box APB-112 IW-D Manual de usuario

Audio Press Box

Audio Press Box APB-D200 R Manual de usuario

Audio Press Box

Audio Press Box APB-D100 R Manual de usuario

Audio Press Box

Audio Press Box APB-112 SB-D Manual de usuario

Audio Press Box

Audio Press Box APB-D116 R-D Manual de usuario

Audio Press Box

Audio Press Box APB-216 C Manual de usuario

Audio Press Box

Audio Press Box APB-116P Manual de usuario

Audio Press Box

Audio Press Box APB-320 USB-C Manual de usuario

Audio Press Box

Audio Press Box APB-216 C-D Manual de usuario

Audio Press Box

Audio Press Box APB-116R Manual de usuario

Audio Press Box

Audio Press Box APB-224 C Manual de usuario

Audio Press Box

Audio Press Box APB-D216 R-D Manual de usuario

Audio Press Box

Audio Press Box APB-P112SB Manual de usuario

Audio Press Box

Audio Press Box APB-P008 IW Manual de usuario

Audio Press Box

Audio Press Box APB-112 OW-D-USB Manual de usuario

Audio Press Box

Audio Press Box APB-024 R-EX Manual de usuario

Audio Press Box

Audio Press Box APB-208R Manual de usuario

Manuales populares de Amplificador de otras marcas

ASTRO

ASTRO HVO V40 P Manual de usuario

Marantz

Marantz SUPERSCOPE BLA-545 Instrucciones de montaje

NAD

NAD CI980 Manual de usuario

Technics

Technics SE-CH770 Manual de usuario

Harman Kardon

Harman Kardon HK6300 Manual de usuario

NAD

NAD T975 Manual de usuario

McIntosh

McIntosh MA6850 Manual de usuario

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manual de usuario

Viatron

Viatron Autrix Manual de usuario

GME

GME GA9800 Manual de usuario

Atlas

Atlas CP700 Manual de usuario

Roland

Roland KC-1000 Manual de usuario

Pyle

Pyle PFMRA350BW Manual de usuario

Advantage

Advantage S-250 Manual de usuario

IRT Electronics

IRT Electronics DVA-3007 Manual de usuario

Dimavery

Dimavery BA-100 Series Manual de usuario

Sony

Sony XM-S400D Manual de usuario

Schertler

Schertler ROY X Manual de usuario