Audio enhancement Educam360-B Manual de usuario

Educam360-B

Fisheye Panorama Network Camera

Manual

Table of Contents

1 Important Safeguards and Warnings ................................................................................. 3

1.1 Electrical safety...........................................................................................................................3

1.2 Environment ...............................................................................................................................3

1.3 Operation and Daily Maintenance.............................................................................................4

1.4 Warnings .....................................................................................................................................4

1.5 Disclaimer....................................................................................................................................5

1.6 Regulatory Information..............................................................................................................5

2DeviceFramework ............................................................................................................... 6

2.1 Structure and dimension............................................................................................................6

2.2 Dimensions..................................................................................................................................8

2.3 Rolling Lens.................................................................................................................................9

2.4 Alarm Setup...............................................................................................................................12

2.5 HTTP Alarm Notification Setup................................................................................................14

2.6 RS-232 Setup .............................................................................................................................15

3 Installation.......................................................................................................................... 16

4 Network Configuration...................................................................................................... 20

4.1 Modify IP Address.....................................................................................................................20

4.2 Login WEB Interface.................................................................................................................21

Support .................................................................................................................................. 22

Welcome

Thank you for purchasing the Audio Enhancement, Inc. Educam360-B. This user’s manual is designed to

be a reference tool for using your product. Please read the following safeguards and warnings carefully

before you use this product and keep this user’s manual for future reference.

1 Important Safeguards and Warnings

1.1 Electrical safety

•All installation and operation should conform to your local electrical safety codes.

•The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)

standard, and supply power with voltage rated by DC 12 V or AC 24 V according to the Limited

Power Source requirement of IEC60950-1. Please note that the power supply requirement is

subject to the device label. Make sure the power supply is correct before operating the device.

•A readily accessible disconnect device shall be incorporated in the building installation wiring.

•Prevent the power cable from being trampled or compressed, especially the plug, power socket

and the junction extruded from the device.

•We assume no liability or responsibility for any fires or electrical shock caused by improper

handling or installation.

1.2 Environment

•Do not aim the device at strong light to focus, such as lamp light and sun light, it may cause over

brightness or light marks on the recording, which is not a device malfunction, and will affect the

longevity of Charge Coupled Device (CCD) or Complementary Metal-Oxide Semiconductor

(CMOS).

•Do not place the Educam360-B in a damp or dusty environment, extremely hot or cold

temperatures,or locations with strong electromagnetic radiation or unstable lighting.

•Keep the camera away from water or other liquids to avoid damages to the internalcomponents.

•Keep the indoor device away from rain or dampness, and avoid fire orlightning.

•Keep ventilation clear to avoid heat accumulation.

•Transport, use, and store the device within the range of allowed humidity andtemperature.

•Heavy stress, violent vibration, or water splashes are not allowed during transportation,

storage and installation.

•Pack the device with standard factory packaging or the equivalent material when

transporting the device.

1.3 Operation and Daily Maintenance

•Do not dismantle the Educam360-B; there is no component that can be fixed by users

themselves. Unprofessional dismantling may cause water leakage or a bad image.

•To avoid burns, do not directly touch the heat dissipation component of the device.

•Please contact after-sale service to replace desiccant when it becomes green.

•It is recommended to use the device together with lightning arrester to improve lightning

protection effect.

•It is recommended to ground the grounding holes to enhance the reliability of thedevice.

•Do not directly touch the optic component CCD or CMOS. You can use an air blower to blow

away the dust or dirt on the lens surface. If necessary, use a dry cloth wetted by alcohol to

gently wipe away the dust.

•Use a dry soft cloth to clean the device. If the dust is difficult to remove, wipe it away with aclean

damp cloth with a mild detergent, and dry the device with a dry cloth. Do notuse volatile solvents

like alcohol, benzene, thinner, strong detergent or abrasives; it will damage the surface coating

and can reduce the working performance of the device.

•When installing or using the device, do not directly touch or wipe the surface of the dome cover

because it is an optical device. If stained with dirt, use oil-free soft brush or air blower to gently

wipe it away. If stained with grease, water, or fingerprint, use soft cloth to gently wipe the water

drop or oil and wait till it is dry, and then use oil-free cotton cloth or lens cleaning paper soaked

with alcohol or detergent to wipe from the lens center outward until it is clean.

•We are not liable for any problems caused by unauthorized modification or attempted repair.

1.4 Warnings

•Modify the default password, after login, to avoid unauthorizedaccess.

•Use the standard components provided by manufacturer and make sure the device is installed

and fixed by professional engineers.

•The surface of the image sensor should not be exposed to a laser beam in an environment where

a laser beam device is used.

•Do not provide two or more power supply sources for the device, otherwise it might

damage the device.

1.5 Disclaimer

•This manual is for reference only. Please, refer to the actual product for more details.

•All the designs and software are subject to change without prior written notice. The manual

willbe regularly updated according to the product upgrade, without priorannouncement.

•Contact Technical Support if any problem occurs when using the device.

•Contact Technical Support for the latest procedure and supplementary documentation.

•Visit our website or contact Technical Support for more information.

•The company is not liable for any loss caused by the operation that does not comply

with the manual.

1.6 Regulatory Information

FCC conditions:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

•This device may not cause harmful interference.

•This device must accept any interference received, including interference that may cause

undesired operation.

FCC compliance:

This equipment has been tested and found to comply with the limits for a digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

•

2Device Framework

2.1 Structure and dimension

The following figure is for reference only. It is only used to identify the external connections.

Figure 2-1

Please refer to Table 2-1 and Table 2-2 for more details about external cable functions and I/O port

functions.

No.

Port

Port name

Connector

Function description

1 Power

Power input

port

Input power, connect to DC12V power.

Note: Power supply requirement shall conform to the

device label.

2 LAN Network port Ethernet

port

Connect to standard Ethernet cable, provide

PoE power supply function.

3 AUDIO IN

Audio input

port JACK

Input audio signal, receive analog audio signal from

pickup and so on.

4 AUDIO OUT

Audio output

port JACK

Output audio signal to speaker and some other

devices.

5 I/O I/O port -

Include alarm input and output. Refer to Table 1-2 for

more details.

Analog

Video Out

Analog Video

Output Port BNC

Output the Analog Video signal, use as test when

installing.

RS-232

RS-232 port

Include the RS-232 port: GND, RX and TX.

Table 2-1

Port name

Cable sequence

Cable port name

Function description

I/O port

ALARM_OUT1

Alarm output port 1, outputs alarm signal to

alarm device.

Note:

ALARM_OUT 1 must be used with

ALM_OUT_GND 1

ALM_OUT_GND1

ALARM_IN1

Alarm input port 1, receives signal of external

alarm source.

ALARM_IN2

Alarm input port 2, used as HTTP Alarm

Notification.

ALM_IN_GND

Alarm input GND terminal.

ALARM_OUT2

Alarm output port 2, used as HTTP Alarm

Notification.

Note:

ALARM_OUT 2 must be used with

ALM_OUT_GND 2

ALM_OUT_GND2

Table 2-2

2.2 Dimensions

You can refer to the following figures for dimension information. The Unit is in millimeters (mm). See

Figure 2-2 and Figure 2-3.

Figure 2-2

Front Side Bottom Side

Figure 2-3

Ø150.20

Ø90.0

Ø150.20

Ø54.3

39.20

57.80

2.3 Rolling Lens

The following figure shows the Camera Lens Cover Setup screen.

Figure 2-4

To set up the camera lens cover open/close function, do the following:

Step 1 Check the check-box to enable the rolling lens function.

Step 2 To manually operate the rolling lens, select the status desired to open or close the

lens. After selecting the desired action, press the save button.

The following figure shows how to open and close the camera lens cover.

Top cover of the Camera

Figure 2-5

Opened Status:

Figure 2-6

Tabla de contenidos

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario